Product features:
1.Energy efficient light source with high luminous efficiency. Imported LED chip, light efficiency reaching to 100-130lm/v, saving more than 60% energy in comparison to halogen lamp.
2.Casing material using tensile aluminum, heat fast, good heat dissipation performance.
3.Compact structure, waterproof IP65, surface anodic oxidation, corrosion-proof WF2.
4.Radiator uses 6063 aluminum alloy, heat conduction coefficient is 201W/mk.
5.The design of sun fancy heat radiation, the chip consistency directly with the aluminum completely, to ensure the best thermal conductivity.
6.Environmental protection without pollution. No lead, mercury; no infrared, ultraviolet radiation
7.Light comfortable even no shadow. Good color rendering, color temperature close to the sunlight.
8.The power supply of constant current and constant voltage control. Can withstand the power fluctuations, no noise, no stroboscopic.
9.Reflector has a small angle and large angle two options to meet the needs of different heights of lighting.
Specifications:
Rated Voltage: AC 220V
Rated Power: LED 150W(200W Can be customized)
Luminous flux: 150W 15000lm
Casing material: High toughed aluminum alloy
Transparent part material: Special toughed glass
Waterproof: IP66
Corrosion-proof: WF2
Weight: 9Kg
Installation: Hanging type, chain type
Reflector optional angle: 45°/120°
Product Features:
1. High efficiency and low energy consumption: imported LED chip for light source, light efficiency reaching to 100-130lm/v, saving more than 60% energy in comparison to halogen lamp.
2. One single casting aluminum case, hi-po electrostatic powder plastic spraying surface, corrosion and rust resistant.
3. High purity aluminum reflection cup proceed by chemical brightening and anodize, color never change,high reflection efficiency.
4. 4mm special anti-dazzle steel glass, heat and impact resistant
5. Radiator consists of 22 pieces of 1070 aluminum radiating sheet, the heat transmitting index of 1070 aluminum is 226W/mk.
6. Even and comfortable light, no overlapping shadow; Good color rendering, color temperature close to the sunlight
7. Environment friendly, no lead and mercury, no infrared and ultraviolet ray radiation
8. Power with constant current and constant voltage control; can endure the undulation from the grid, no noise and no stroboflash.
9. Exterior fastener uses stainless steel, dainty and endurable.
10. Built-in power supply.
Main Parameters:
Rated Voltage: AC 220V
Rated Power: LED 50W
Luminous flux: 50W 5000lm
Casing material: High strength aluminum alloy
Transparent part material: Special steel glass
Waterproof: IP65
Corrosion-proof: WF2
Weight: 2.8Kg
Dimension: 281.6*207.3*118.32mm
Mounting method: wall mounted, ceiling mounted and seat mounted
Product heat dissipation advantage:
1.High thermal conductivity 6063 aluminum radiating sheet: 201W/mK,it is 2.3 times higher than traditional ADC12 die-casting aluminium: 96W/mK.
2.Chip substrate using red copper,thermal conductivity: 401W/mk,capacity of heat transmission increased double times compared with aluminum ?
3.Thermally Conductive Silicone use DOW CORNING,thermal conductivity: 3.3,gray color,it makes the chip heat passed through thermal conductive silicone rapidly to the radiator fins. General lamps and lanterns manufacturers choose white thermal conductive silicone, heat conduction coefficient is 0.8~1.2
4.Lighting up half an hour,negative spot weld temperature less than 65 degree;fins in back temperature different in 5 degree;chip temperature different with chip back also in 5 degree.
5.The heat sink thickening processing, greatly increases the heat dissipation area, heat faster and more efficient.
6.Uniform light color
Product features:
1. High efficiency and energy-saving: imported integrated LED chip with high efficiency for light source, light efficiency reaching to 100-130lm/v, saving more than 60% energy in comparison to halogen lamp.
2. Highest explosion-proof level, IP66, the whole lamp has the supreme explosion-proof protection performance.
3. Diecasted hard aluminum alloy casing with pressure-casted formation, surfacing high voltage electrostatic powder coated, rust resistant and corrosion resistant.
4. Design of cavities for light source and electric makes it efficiently avoid the heat from adding together, and so it has good heat dissipation performance, lamp is more stable and reliable.
5.Transparent high boron silicon toughed glass, anti-impact, collision and corrosion resistant, resistant to rapid heat change.
6.With constant current & voltage control, and short-circuit & over voltage protection, driver can work even under fluctuated grid without noise or stroboflash.
7.Cavities for light source, electric parts and wiring terminals are separated from each other to ensure the system’s stability; The wiring cavity is designed to facilitate the users’ wiring.
8. Multi-mounting modes.
Main parameters:
Rated voltage: AC 220V
Rated power: LED 50W (40/60W can be customized)
Luminous flux: 50W 5000lm
Casing material: High toughed aluminum alloy
Transparent part material: Special toughed glass
Waterproof level: IP66
Corrosion-proof level: WF2
Explosion-proof mark: Ex dIICT4 Gb/DIP
Weight: 3.8Kg
Mounting method: wall mounted, suspension mounted, ceiling mounted, flange mounted, banister mounted
Product features:
1.IP65, corrosion-proof WF2
2. Imported LED chip and patented integrated circuit packaging technology, light efficiency reaching to 100-130lm/v, saving more than 60% energy in comparison to halogen lamp.
3. High hardness aluminum alloy casing, corrosion resistant against rust and heat.
4.Non-screw maintenance system, easy to operate and maintenance.
5.High purity aluminum reflector, with original purity of 99.9% to be processed by anodic oxidation, anti-oxidation, anti-discoloration, good light reflection.
6. SUS304 installation fastener, corrosion resistant against air, water, acid, alkaline, salt and other chemical solutions, applicable to various dreadful environment for long time.
7. 4mm steel glass transparent part, with light transmittance reaching 93%. Mounting bracket can be rotated to the angle range of 280°, satisfying various light casting requirement.
8. No pollution, Green, and environment-friendly.
?no lead, mercury and other harmful substance inside the light source;
?no infrared or ultra-violet light, the light emitting from the light source won’t increase the air temperature;
?no noise or any other pollution to the environment.
Specifications:
Main parameters Units Value
Power w 50
Rated voltage V 220
Luminous flux lm 5000
Waterproof / IP65
Corrosion-proof / WF2
LED chip knot temperature ° =85°
Life time h 50000
Power factor % 95
Dimensions mm 310.47*220*50
Weight kg 3
Mounting method / wall mounted, ceiling mounted and seat mounted
Product features:
1. The light source uses SMT LED, which makes whole light more efficient, long-lasting, energy saving and low consuming.
2. With advanced engineering plastic ABS, the ground and refined casing is heat-proof and vandal-proof.
3. With PMMA, the transparent parts have high transmittance. Light is even rather than dazzling. The surface is frosted to prevent scratches.
4. With 5 level lighting modes(namely high light, working light, weak light, flashing light and stroboflash light) to adjust lighting, it can meet many needs such as lighting, walking, rescue instruction, etc.
5. With precise construction design, it is not only delicate but with good protective performance. IP65.
6. Warm white light source makes lighting more comfortable. Each unit can cover at least 15 square meters.
7. Containing magnet, it can adhere to any iron metal material.
8. Battery is charged by common port, which is simple and easy. By presetting over-charge, over-discharge and short-circuit protection, the product is guaranteed reliable long lifetime.
9. Hand-held, ceiling-mounted, magnet-adhered, it’s easy to light.
Specifications:
Main parameters Value lithium battery
1 Power W 5
2 Working voltage V 3.7
3 Battery capacity Ah 1.8
4 Waterproof level / IP65
5 Corrosion-proof level / WF2
6 Life time Battery cycles 1000
Light h 100000
8 Working hours Strong h 5
Normal working light h 10
Weak working light h 15
9 Dimensions Height mm 40
Diameter Of Lamp Cap mm 70
10 Weight g 90
Product features:
1. CREE LED for light source, high efficiency, long lifetime and low energy consumption.
2. High toughed PC casing, high light transmitting PMMA for transparent part, shock & impact resistant. Passing the free drop test from 3 meters height without malfunction.
3. Marking for explosion-proof is EX ibITCT4; it is applicable to various Inflammable and explosive sites.
4. With high capacity memory-free Li-ion battery, low self-discharging rate, it can be recharged for 1000 cycles.
5. Precise construction design, IP66, usable in extreme weathers such as snowfall and rainfall.
6. Battery automatic detection, when the power is insufficient, it shifting from strong light to working light; convenient for emergency use.
7. Touch switch, it is convenient & simple to operate.
8. Intellectual circuit design, with protection against over-recharge, over-discharge and short circuit. Meanwhile having the low voltage protection: when the battery is low, the indicating light on lamp head will turn to red and then switch off the flashlight.
9. Smart and pretty, portable & wearable.
Specifications:
NO. Main parameters Unit Value
1 Power W 3
2 Working voltage V 3.7
3 Battery capacity Ah 1.8
4 Waterproof level / IP66
5 Corrosion-proof level / WF2
6 Marking for explosion-proof / Ex ibIICT4
7 Life time Battery cycles 1000
Light source h 100000
8 Working hours Weak h 12
Strong h 6.5
9 Dimensions length mm 60
Width mm 40
Height mm 30
10 Weight g 90
Major parameter:
Rated voltage:ac 220v
Rated power:led 150w
Luminous flux:150w 15000lm
Casing material:high strength aluminum alloy
Transparent part material:special tough glass
Waterproof level:ip65
Corrosion-proof level:wf2
Weight:5.6kg
Dimension;270*250.5*155mm
Mounting method:wall mounting, ceiling mounting, seat mounting
Product feature:
1. High efficiency and low energy consumption: imported led chip for light source, light efficiency can reach 100-130lm/w, saving more than 60% energy in comparison to metal halide lamps.
2. One single casting aluminum case, hi-po electrostatic powder plastic spraying surface, corrosion and rust resistent
3. 4mm special anti-dazzle steel glass, heat & impact resistant
4. Radiator consists of 22 pieces of 1070 aluminum radiating sheet, the heat transmitting index of 1070 aluminum is 226w/mk.
5. Environment friendly, no lead and mercury, no infrared and ultraviolet ray radiation
6. Even and comfortable light, no overlapping shadow; good color rendering, color temperature close to the sunlight
7. Power with constant current and constant voltage control; can endure the undulation from the grid, no noise and no stroboflash.
8. Exterior fastener uses stainless steel, dainty and endurable.
9. With exterior power supply for standard configuration; custom-made built-in power supply available; 2 pieces of integrated light source with dimension of 340*285*138mm, weight 6kg.
Product features:
1. Ip65, anti-corrosion wf2; be processed by anodic oxidation, corrosion resistant against rust and heat.
2. Imported led chip, led light efficiency can reach 100-130lm/w, saving more than 60% energy in comparison to metal halide lamps.
3. Pure aluminum reflector has been processed by rotary press modeling, polishing and anodic oxidation, it never changes color and has high light reflection. The light casting angle is optional among 25°, 60°, 100°.
4. Fin radiator for heat radiation.
Be consisted of many pieces of 1070 aluminum fins which are assembled together by “snapping fin” method;
Making the great power led radiator lighter, firmer but better in radiation performance;
Passing the heat from the light source to the fins with excellent heat conductivity to rapidly decrease the light source’s temperature;
Extending the light source’s life time and decreasing the light’s attenuation.
5. Module-style fitting design, more convenient and faster in maintenance.
Specification:
Main parameters
Power: 100w
Rated voltage: 220v( voltage range 85-265v)
Luminous flux: 10000lm
Protection against ingress: ip65
Anti-corrosion: wf2
Led chip knot temperature: =85°
Life time: 50000h
Power factor: 95%
Dimensions
Main body: 253mm
25º aluminum reflector: 129.08*ø354.42
60ºaluminum reflector: 106.5*ø270.43
100ºaluminum reflector:75.18*ø360.56
Weight: 3.98kg
Mounting method: hitch mounting/overhead trolley mounting
Product features:
1, high efficiency and low energy consumption: imported led chip for light source, light efficiency can reach 100-130lm/w, saving more than 60% energy in comparison to metal halide lamps.
2, one single casting aluminum case, hi-po electrostatic powder plastic spraying surface, corrosion and rust resistent
3, 4mm special anti-dazzle steel glass, heat & impact resistant
4, radiator consists of 22 pieces of 1070 aluminum radiating sheet, the heat transmitting index of 1070 aluminum is 226w/mk.
5, environment friendly, no lead and mercury, no infrared and ultraviolet ray radiation
6, even and comfortable light, no overlapping shadow; good color rendering, color temperature close to the sunlight
7, power with constant current and constant voltage control; can endure the undulation from the grid, no noise and no stroboflash.
8, exterior fastener uses stainless steel, dainty and endurable.
9, built-in or built-out power supply.
Major parameter:
Rated voltage:ac 220v
Rated power:led 100w(120w custom made)
Luminous flux:100w 10000lm
Casing material: high strength aluminum alloy
Transparent part material: special steel glass
Waterproof level:ip65
Corrosion-proof level:wf2
Weight:5.2kg
Dimension;270*250.5*130mm
Mounting method: wall mounting, ceiling mounting and seat mounting
Specification:
Main parameters
Power: 200w
Rated voltage: 220( voltage range 85-265v)v
Luminous flux: 20000lm
Waterproof level: ip65
Corrosion-proof level: wf2
Led chip knot temperature: =85°
Life time: 50000h
Power factor: 95%
Dimensions
Main body: 253mm
100ºaluminum reflector:75.18*ø360.56mm
Weight: 6.3kg
Mounting method: hitch mounting/overhead trolley mounting
Product features:
1. Ip65, corrosion-proof level wf2; be processed by anodic oxidation, corrosion resistant against rust and heat.
2. Imported led chip, led light efficiency can reach 100-130lm/w, saving more than 60% energy in comparison to metal halide lamps.
3. Pure aluminum reflector has been processed by rotary press modeling, polishing and anodic oxidation, it never changes color and has high light reflection. The light casting angle is optional among 25°, 60°, 100°.
4. Fin radiator for heat radiation.
Be consisted of many pieces of 1070 aluminum fins which are assembled together by “snapping fin” method;
Making the great power led radiator lighter, firmer but better in radiation performance;
Passing the heat from the light source to the fins with excellent heat conductivity to rapidly decrease the light source’s temperature;
Extending the light source’s life time and decreasing the light’s attenuation.
5. Module-style fitting design, more convenient and faster in maintenance.
Product features:
1.Light source uses CREE LEDs, high efficiency & long lifetime.
2.CNC processed casing with hardened oxidation, shock & impact resistant.
3. Battery with protection against over charge, over discharge and short circuit.
4. Waterproof IP65, corrosion-proof WF2.
5. Smart and pretty, portable & wearable.
Specifications:
Order Main parameters Unit Value
1 Power W 1
2 Working voltage V 3.7
3 Battery capacity Ah 1.4
4 Waterproof level / IP65
5 Corrosion-proof level / WF2
6 Life time Battery cycles 1000
Light source h 100000
7 Working hours Weak h 10
Strong h 5
8 Dimensions Length mm 115
Diameter of lamp head mm 23
9 Weight g 95
Product features:
1.CREE LED, high brightness, high efficiency and long lifetime.
2.Aviation level aluminum alloy casing, shock & impact resistant.
3.Deep vacuum electroplating aluminum reflector, the light coverage distance can reach more than 150 meters.
4.It has the protection against overcharge, over-discharge and short circuit.
5.IP68, corrosion-proof WF2.
6.It can be held on hand or carried on shoulder.
Explosion-proof mark: Ex dIICT6 Gb
Waterproof level: IP68
Corrosion-proof level: WF2
Life time:
Battery: 1000cycles
Light source: 100000h
Working hours:
Weak: 14h
Strong: 8h
Dimensions
Length: 146mm
Diameter of lamp head: 69mm
Weight: 980g
