Single Girder Beam Bridge Overhead Crane
European type cranes have such design concepts as small dimension, light dead weight. Compared with traditional cranes, the limiting distance is minimum from hook to wall, and headroom is the lowest, which makes cranes work more close to the front, and lifting height more higher that increases effective working space of workplace.
Capacity: 1ton-20ton Span: 6m-31.5m Lifing heihgt: 6m-18m Working grade: A3-A5
Working temperature: -25 to +42 centigrade
Three control methods:
Pendent control: A. Easy operation when obervation. B. Convenient to communication with other workers.
Wireless remote control: A. Greatly improved the work efficiency. B. Keep the operator from danger.
Cabin room control: A.Designed by Man-machine engineering principle
B.The driver seat has adjustable height and rotation.
Product classification
Because single girder overhead crane divides into four types, here are the detailed information, if you are interested in any one, please let us know.
LDA type single girder overhad crane is widely used in warehouse, plant, matrerial stock to lift the goods.
Capacity: 1ton-20ton
Span: 7.5m-31.5m
Lifing heihgt: 6m-18m
Working with CD1 OR MD1 electric hoist
European type single girder overhead crane is compact lifing manchinery designed and manufacturing in the strict accoring with FEM and DIN standard, which is advanced technology and beautiful design.
Capacity: 1ton-20ton
Span: 6m-31.5m
Lifing heihgt: 6m-18m
Working with European type electric hoist
LDP single girder overhead crane belongsto very low clearance light duty equipment. Electric hoist is at the side of the main girder, so it will increase service space of hook and reduce the cost, so it is widely used in the situation of low headroom workshop.
Capacity: 1ton-20ton
Span: 6m-31.5m
Lifing heihgt: 6m-18m
Working with CD1 OR MD1 electric hoist
LX single girder overhead crane is a light duty track traveling crane with railway, which applies to be used in the matching assembling site and warehouse.
Capacity: 0.5ton-10ton
Span: 6m-31.5m
Lifing heihgt: 6m-18m
Working with CD1 or MD1 electric hoist
Single girder overhead crane description
Single girder overhead crane runs on an elevated runway system along the length of a factory, the hoist moves the load up and down, and the bridge of the crane moves the load forward and backward. It is characterized by more reasonable structure and higher strength steel as a whole, the main beam and end carriage are made by U-section steel plate. It is used together with CD1/MD1 model or HC/HM model wire rope electric hoist as a complete set. Widely used in plants, warehouses, material stocks to lift goods. It is prohibited to use the equipment in the combustible, explosive to corrosives environment.
Single girder overhead crane classification
LDA type single girder overhead crane
* It is widely used in warehouse, plant, material stock to lift the goods.
* Capacity: 1ton-20ton
* Span: 7.5m-28.5m
* Lift height: 3m-30m
* Working with CD1 OR MD1 electric hoist
LX type single girder overhead crane
* It is a light duty track traveling crane with railway, which applies to be used in the matching assembling site and warehouse.
* Capacity: 0.5ton-10ton
* Span: 6m-31.5m
* Lifting height: 6m-18m
* Working with CD1 or MD1 electric hoist
LDP type single girder overhead crane
* It belongs to very low clearance light duty equipment.
* Electric hoist is at the side of the main girder, so it will increase service space of hook and reduce the cost, so it is widely used in the situation of low headroom workshop.
* Capacity: 1ton-20ton
* Span: 6m-31.5m
* Lifting height: 6m-18m
* Working with CD1 OR MD1 electric hoist
European type single girder overhead crane
* It compact lifting machinery designed and manufacturing in the strict according with FEM and DIN standard, which is advanced technology and beautiful design.
* Capacity: 1ton-20ton
* Span: 6m-31.5m
* Lifting height: 6m-18m
* Working with European type electric hoist
* Electric Hoist 10 T Overhead Crane Workshop Bridge Crane Lifting System
z
Single Girder Overhead Crane Description
Single Girder Overhead Crane also called single beam bridge crane, it is characterized by more reasonable structure and higher strength steel as a whole. Used together with CD1, MD1 model electric hoist as a complete set. The operation mode has the ground cable handle, ground wireless remote control, operation and the two mode of operation and driving. Single Girder Overhead Crane lifting capacity: 0.5ton ~ 32ton, lifting height: 3m~60m, span: 7.5m~31.5m, working temperature: -20°C~60°C, working grade: A3~A6.
Single Girder Overhead Crane is widely used for material lifting in many industries, manufacturing workshop, mold inject workshop, machining workshop and so on. But the crane is forbidden to work in the Inflammable, explosive and corrosion environment.
Single Girder Overhead Crane Feature
1. Customized design overhead crane;
2. Support OEM / ODM for our clients;
3. Steel material adopt high quality carbon steel Q235 or Q345B;
4. Easy to install,operate,maintain;
5. Crane drive: IP54 or IP44,level F insulation;
6. With senior technical engineer team and perfect sales service
Company Information
1. Factory establish in -- 1981. With 34 years fabrication experience, we are professional.
2. Factory area -- 600000m². Large production capacity, help customer improve the factory construction time and saving more cost.
3. Exporting to more than 50 countries. Rich exporting experience make us provide a better exporting service, and help our customer avoid more troubles during every step.
4. Rich experience cooperate with different application industry -- we can provide more reasonable suggestion during the process of solutions confirm. Help our customer get a best money performance equipment.
5. 2 years warranty, no worry about the after sale service.
6. Provide Overseas installation. To make sure the crane can service better for the working.
z
Electromagnetic Lifter Application
Electromagnetic Lifter is suitable for transferring cast ingots, steel balls and kinds of steel scraps.
Electromagnetic Lifter Features
1. It adopts a special magnetic circuit design which has large air space and magnetism density. It is made of aluminum wire or copper and the coil protection plate is made of the rolled high Mn steel plate that has good performance of wear-resistance and heat-proof. It also has the characteristics of light weight, low power consumption, high lifting capacity and long serving life.
2. This series has fine insulation structure. The insulation treatments adopt the vacuum drying & glue filling, which has improved the electrical and mechanical performance of the coils .The insulation grade can reach class special C.
3. It generally adopts the control mode of constant voltage. It can further improve the lifting capacity if changing to adopt the control mode of over excitation.
4. With simple structure reliability, it is suitable for working with all kinds of lifting equipment.
Electromagnetic Lifter Classification
MW84 series is specially designd for lifting and transporting medium-thick steel plate .The whole operation is safe, exact and quick , when transport some long plates they easily go disto rtion, so we advice combination of multiple units to be used. For some plate which thickness is around the range of 6mm-32mm, space between 2 magnets should leave an extra 2.5-3.5m, the length at each end is that of one half of space.According to different lifting pieces, the series is divided into type 350 and type 400 and type 500 and type 650.Type 350 is suitable for medium-thick plate factory, ship building factory, machinery manufacturing factory, it is controlled by adjustable magnetic field, and can lift one or certain pieces of plates. Type 400 is suitable for lifting as many as possible pieces at a time ; We can also produce the product less than 700°c ( high temperature type) for you.
MW5 series magnet chuck is an electromagnetic principle, by internal coils generate magnetic force, through magnetic panel, the contact surface of the workpiece panel tightly sucked through the coil power, the magnetic force disappears achieve demagnetization, remove the piece of principle the production of a machine tool accessories.
Packaging & Shipping
1. Delivery time
Within 10 business day after the receipt of deposit.
2. Packaging
Wood case for electric parts, accessories;large sections will be loaded onto bulk cargo ship after packing.
3. Payment terms
FOB, CFR and CIF are common trade terms. We can accept payment terms: TT, L/C, west unit, DUP, DUA and other.
4. Installation
the installation team can be sent to local site to install for customer.
5.Warranty
We'll be responsible for maintenance if our product itself has quality problem during one year after receiving.
z
Product Intruction
The Double girder bridge crane is used widely in factory, workshop, mining field, warehouse, etc for general loading, unloading and transporting service, suitbale used for steel plant, machine manufacture and assembly workshops, metallurgy workshop and continuous production line.
Specification
* Lifting capacity: 0 - 500 ton
* Span: 10.5 m~31.5 m
* Lifting Height: 7.5 m -32 m
* Working Duty: A3-A8
* Power Supply: 380V, 50Hz, 3 phase or 1 phase
* Control Method: Ground control, Remote control
* CertificationL: ISO, CE, SGS
* OEM & ODM: Accepted
Safety system
1. Traveling and lifting limit switch
2. Overload protection device
3. Voltage lower protection
4. Emergency stop function
5. Sound and light alarm
6. Polyurethane buffer and long service bearing
7. Rain cover for hoist, driving and electrical device
Product classification
QD type double girder overhead crane
* Capacity: from 5ton to 50ton
* Span: 10.5m to 31.5m
* Working grade: A5-A6
* Working temperature within -25 to +40 centigrade
* Control model: cabin room, remote control and both
LH type double girder electric hoist overhead crane
* Capacity: from 5ton to 32ton
* Span: 7.5m to 25.5m
* Working grade: A3-A5
* Working temperature within -25 to +40 centigrade.
* Control model: cabin room, remote control and both
YZ type doubel girder Foundry overhead crane
Lifting capacity:5ton-320/80toon
Working temperature: -10°~60°
Working duty: A7
Application: pouring melted iron, lifting molten steel and so on
Control model: cabin room, remote control and both
European type double girder overhead crane
* Capacity: from 5ton to 500ton
* Span: 7.5m to 32m
* Work duty: A5-A7
* Appication: lifting goods or materials in plants,warehouses,materials stocks
* Features: Smooth starting and stopping,low noise, commodious cabin and good view
QC type electromagnetic double girder overhead crane
* Capacity: from 5ton to 50ton
* Span: 10.5m to 31.5m
* Work duty: A6
* Appication: load and unload metallic materials such as steel plate, scrap iron, and so on
* Features:Strong absorption force, perfect performance, low maintenance
QZ type double girder overhead crane with grab
* Capacity: from 5ton to 20ton
* Span: 10.5m to 31.5m
* Work duty: A6.
* Appication: loading goods in port,factory,workshop and power plant
* Control model: cabin room, remote control and both
Packaging & Shipping
MOQ: 1 Set Overhead Crane Price
Port: Shanghai, Tianjing, Ningbo
Payment: L/C, T/T, Western or according to your requirements
Delivery Time: Within 20 days after receiving your deposit
Packaging: PE foam, plywood case
Shipping: By sea, by land or according to your requirments
z
