Automatic lighting surge generator (or lighting surge immunity) sg61000-5 is used to assess the power cord and connect the internal switch stood in line to connect the internal switch to provide a common basis for switching the natural world and lightning caused by the high-energy transient interference performance. Performance fully meets the iec 61000-4-5, en61000-4-5 and gb/t17626.5 standards.
Specifications:
Product modelSg61000-5Sg61000-5tSg61000-5h12Sg61000-5h
Output voltage (open)1.2/50µs±20%1.2/50µs±20%1.2/50µs±20%1.2/50µs±20%
Output current (short)8/20µs±20%8/20µs±20%8/20µs±20%8/20µs±20%
Output impedance2o2o2o and 500o2o and 500o
Output voltage range0~6kv±10%0~6kv±10%0~12kv±10%0~10kv±10%
Output current range0~3ka±10%0~3ka±10%0~6ka±10%0~5ka±10%
Surge repetition1~9999 times1~9999 times1~9999 times1~9999 times
Interval time20~9999s20~9999s20~9999s20~9999s
PolarityPositive, negative or positive/negative automatic
Phase shiftAsynchronous, synchronization 0°~ 360° or specific angle
Coupling/decoupling network (cdn)Includes a 16a single phase cdnIncludes a 20a 3phases cdnIncludes a 30a 3phases cdnBuilt-in 20a 3phases cdn
Dimensions (wxdxh)44x45x35cm44x45x55cm56x69x165cm56x69x155cm
Gross weightAbout 30kgAbout 48kgAbout 300kgAbout 270kg
Touch screen with super big lcd and built-in windows ce
Lsg-3000 moving detector goniophotometer completely meets lm-79 clause 9.3.1 requirement. The lsg-3000 is an automatic light distribution intensity 3d curve testing system for measuring light. The measuring distance is from 5m to 30m. It can measure all types of lighting sources, led or hid luminaires such as indoor and outdoor luminaires, roadway luminaires, street lamps, flood lights and other kinds of luminaires.
Measurement:
Luminous intensity data, luminous intensity distribution, zonal luminous flux, luminaries efficiency, luminance distribution, coefficient of utilization, luminance limitation curves glare, maximum ratio of distance to height, equal illuminance diagrams, curves of luminaires vs lighting area, lsocandela diagrams, efficient luminescence angle etc.
Features:
many national patents pending on hardware and software.
cie class a & constant temperature photo detector (class l detector can be optional).
high degree of intelligent and test function is complete.
the rotation motor is from japan mitsubishi motors and it uses germanic angle decode system, it will help smoothly and high accuracy rotation. It is very stable when start and stop.
the working principles are according to iesna and cie. This instrument is specially recommended by lm-75, lm-79 and cie121-1996.
with some optional instruments, it has good expanding functions
the position and working state remain the same as it is under working.
special collimation device with laser cross line, conveniently and accurately fix the position of the tested luminaries.
Wooden case
Emi-9ka is an automatic emi receiver. It is a main test system for emi (electro magnetic interference) testing. The emi-9ka is produced by the full closure structure and strong electro-conductibility material, which has high shielding effect. Due to the new technology for the emi test system, it solved the instrument self-emi problem. The test results are according to the international format test report. The emi test system emi-9ka fully meets cisprl6-1, gb17743, fcc, en55015 and en55022.
Specification:
• detection frequency range: 9khz~30mhz ( emi-9ka) or 9khz~300mhz ( emi-9kb)
• frequency stability: 1x 10-6
• frequency resolution: (9khz~150khz) 30hz; (150khz~30mhz) 1khz
• test tolerance: ±2 db
• measure and detection method: pk, qp and av range from 20dbµv to 140dbµv
• test time: setting by customers
• frequency scanning step length: 20hz~2mhz
• sweep bandwidth: 200hz; 9khz; 120khz
Introduction:
Esd simulator (electrostatic discharge generator or electrostatic gun) is in full compliance with iec 61000-4-2, en61000-4-2, iso10605, gb/t17626.2, gb/t17215.301 and gb/t17215.322. The esd generator is designed for the assessment of electrical and electronic equipment to withstand esd performance. Esd61000-2/esd61000-2a has lcd display in both english and chinese, they equipped with an infrared remote control which can allow you do the test in some special place.
Specifications:
Product model
Esd61000-2
Esd61000-2a
Output voltage
0.1~20kv±5%
0.1~30kv±5%
Polarity
Positive/negative
Positive/negative
Energy storage capacitance
150pf±10% (replaceable)
150pf±10% (replaceable)
Discharge resistor
330o±5% (replaceable)
330o±5% (replaceable)
Current rise time
0.6~1ns
0.6~1ns
Testing functions
Single, count, 20pps, air, contact, iec level
Single, count, 20pps, air, contact, iec level
Trigger mode
Manual/auto
Manual/auto
Numbers of discharge
1~9999
1~9999
Repetition
0.05s~99.99s
0.05s~99.99s
Working power
Ac220v(option 110v)±10%, 50/60hz
Ac220v(option 110v)±10%, 50/60hz
Touch screen with super big lcd and built-in windows ce
Calibrate report:
Output voltage (kv)
First peak current (a)
Current at 30ns (a)
Current at 60ns (a)
Rise time (ns)
2
7.29
4.10
2.20
0.93
4
15.40
7.90
4.30
0.97
6
23.20
12.10
6.50
0.97
8
29.40
16.20
9.30
0.89
-2
7.39
3.50
2.30
0.92
-4
15.50
7.70
4.30
0.89
-6
23.40
11.90
6.30
0.90
-8
31.80
16.10
8.20
0.90
Note: metal holder needs extra cost.
