Long reach excavator boom
Long reach excavator boom are indispensable parts of the swamp buggies. Under the demands of the markets, sunton supplies full range of excavator front parts including long reach excavator boom, three-section boom, bucket, hydraulic vibrating hammer, grasper, ripper and other parts of earthmoving machine. More and more customers have realized the value of long reach attachments where standard booms fail to get the necessary job done, including swamps, marshes, soft terrains dredging works, sea, channels, rivers, waterways dredging work, construction of sea wall, ditches, levees and pond maintenance, foundation and basement excavation.
Sand processing machinery
Sunton long reach excavator boom and arm is built with high tensile steel, which could achieve a half more digging depth and forward reach over a standard boom, saving valuable cost and time, and maximizing working efficiency. All surfaces of the parts are shot blasted, coated by marine grade epoxy paints. The front parts are all made by standard parts available in the local market of the customer.
Side pontoons
Sunton supplies long reach front packages for a wide range of excavator models, ranging from 8-100 metric tons operating weight.
Sand washing machine
ModelLr120Lr 200Lr 220Lr 300Lr 350Lr 400Lr 450
Total length (mm)13000153801538018000200002200024000
Boom length (mm)71008220822010000110001200013000
Arm length (mm)590071607160800090001000011000
Weight (kg)3000400042005200600065007000
Max dig depth (mm)9000113401137013000150001650018000
Pneumatic Winches
Brief Introduction Of Pneumatic Winches Plant
The Pneumatic Winches Plant is another partner plant of SUNTON, which is one of the member of SINOPEC and china-petrol net with AAA class credit. It has passed through ISO9001 OF 2000 edition. It has a provincial technology center with a top research team which has powerful innovation ability. It is also equipped with advanced digital processing machine and perfect detection means. Co-operated with Tianjin University, Shandong University and some other famous universities and research academies, the company has gained a lot of new research achievements with many inventions and practical patents. Meanwhile, the company also can design and manufacture some special products according to users' requirements.
Spuds Stabilizers
Steel Pontoons
With petroleum drilling equipments as their main products, the company can also supply a variety of other serial products according to customers’ different requirements. At present, the products includes the following 24 series: XJFH series pneumatic winch, JQH series pneumatic winch, JCB series pneumatic explode-proof winch, CJ series well-measuring winch, DCJ series electric well measuring winch, JB series mud mixer, DSJ series rope-inversing machine, TYZ series hydraulic pump station valve set, TYJ series hydraulic winch, TYM series special hydraulic winch, TSB series mud pump and sand pump, 3HY(W) series multi—function reciprocating pump, SBG(W) series double screw-rod convey pump, XYQ3W hydraulic pincers,
swamp buggies
TSYB series manual hydraulic tools for hydraulic pump, FSK series pneumatic pincers, CSB series diesel pump set, TC series cable winch, XG series suspension joints, HSG series hydraulic cylinder, JL series engineering machinery, JC series multi—function skid steer loader, 4—1760W generating set and SD series diesel engine. All the products shown on this catalogue can be supplied with different models. The products have been sold to many big oil fields and many other lines in China. Parts of them have been exported to the U.S, Spain, Europe, South-east Asia and some other countries and regions.
swamp buggy excavators
Standard Amphibious Undercarriages- Small and Medium Size
Product Features
1) Pontoon Construction
High Strength Weathering Cor-Ten plate steel is used in the fabrication of the pontoons. Cor-Ten steel is marine grade and corrosion resistance steel that has 5 to 8 times the atmospheric corrosion resistance and 20% more tensile strength than similar size 16Mn Q345B structural plate steel.
In the pontoon, there are many supporting steel bars which reinforcing pontoon strongly. Each pontoon has 2 bulkheads, providing 3 independent watertight compartments with inspection plugs located on the outside of the pontoons. Each compartment of the pontoon has 1x25mm drain hole at bottom and 1x25mm inspection hole on side of pontoon near the top. Service man manholes on each pontoon are optional, made for easy maintenance and field servicing.
Pontoons are shot blasted to ensure that the surface is thoroughly clean and free from contaminants and rust. In addition, this process presents the steel with a surface texture that provides excellent adhesion of prime coat of paint. Interior Metal Finish is coated with Zinc chromate rust inhibitor or Rust Inhibitor priming paint. Exterior Metal Finish is 2 part organic zinc epoxy base coat Primer, Epoxy topcoat.
The bottom of the pontoon is reinforced for rough terrain operations. Especially the chains runway channels or paths are made of 3-layers steels, 2-part HD70 high tension steel plus the spring steel wear plate, which highly prolong the pontoon's service life.
SUNTON Pontoon shape is quite uniquely designed that could reduce the resistance of the water or mud during its moving.
The hydraulic hoses or pipes are shielded with steel from being damaged during operations.
2) Track Chains and Track Shoes
Each SUNTON pontoon could be equipped with two, three or four strands of heavy-duty track chains. The chain link pads and track pads are all made of high tension steel HD70. The design and size of SUNTON track chain rollers and pins or bushes are all different from others with larger sizes. Tensile strength of link pads could reach 680Mpa. The chain roller paths/channels are lined with high strength abrasion-resistant steel and spring steel that matches the hardness of the chain rollers.
Track shoes/cleats/pads are fabricated with heavy duty steel, which makes it less prone to cracking, due to the wider spread between yield strength and ultimate tensile strength. Track pad steel tensile strength reaches 620Mpa. Customer could select much harder steels, whose tensile strength could reach 860Mpa, but cost is higher. Track shoes are box-shaped, welded or bolted to the chains and fully covering the pontoons. UHMW wear plate or HDPE or HDMP plate, is the optional design to meet the challenge of wearing when machine often moves on stiff or tough ground. Usually there are two Ultra High Molecular Weight trackwear pads per cleat.
Sunton amphibious undercarriage for drill rig
The midsection is flat, no sleeve ring is required. Load capacity from 40 to 50 ton. The rig will be used in deeper water. The pontoon size shall be l*w*h=11m*3m*2m and the steel wall plate of the pontoon is reinforced and much thicker than the normal pontoons in order to stand the large torque force during the drill rigs being working. The weight of the undercarriage reaches about 40tons and the total buoyancy will be 90tons at least to provide a payload about 50 tons.
Underwater weed harveste
Each pontoon will have 4 chains tracks being equipped with special material wearing plate and 2 sets doosan tm60vc motors. Main specification is as below:
The lifting load of the crane is 10tons.
Water hyacinth harvester
The platform payload is also 10tons.
Pipe is made of steel, length 12m.
Total buoyancy of the platform will be 41.3tons.
The pontoon size will be l*w*h=10.2m*1.8m*1.8m, doosan tm60vc motors.
Complete new type tracks and chains system for heavy duty applications.
Suitable for long distance travelling on both swamp lands, solid lands and deep water.
Vibration chute for gold mining
Pontoons are treated with special wearing materials and paintings from wearing and corrosions from seawaters.
Dredge pumps
11.1 production introduction
Sunton dp500 hydraulic dredge pump could be used on the dredging excavators or other dredging equipment for dredging sand, gravel or mud etc. The material of the pump impeller and housing is high-chromium cast iron which is particularly applied for dredging sand and gravel and have very good performance on wear resistance, easy to be replaced and low cost.
Long reach excavator boom
The dp500's flow is 500m3/h. Solid content is 30-40%. Diameter of the outlet is 150m. It can be driven by the engine output 120kw and the hydraulic pump as doosan k3v112 or same kind.
Platform undercarriage
The pump is impeller centrifugal pump, including 2 rotate cutter or stirrers which loosen the mud or sand matters for suction. The pump is hydraulically driven instead of electrically driven which has more applications in deep water area and used for dredging different matters. The electrical pumps usually met the problem of short circuit or burn when dredging the hard matters. Delivery time usually is 40 days.
Mining equipment
11.2 product specification
Fit to 18tons, 20tons or 25tons or 30tons excavators.
There are 2 shafts of the bucket, f70mm andf80mm, which shall be confirmed which one will be ordered by the customer, so does the width of the baffle plate of the inner-ear plate of the bucket.
The rotating speed of the major shaft of the suction pump is 1200rpm.
Applicable water depth: 0.5-10m.
Diameter of the outlet hose is f150mm
Max. Pumping head: 35m.
Max. Flow: 500m3/h.
Long reach excavator boom china
11.3 product warranties and claims:
Sunton, being as the supplier, will guarantee that the dredge pump are made of best materials, with first class workmanship, brand new, unused and correspond to all respects with the quality, specifications and performance as stipulated in this contract. Sunton also guarantees that the product when properly operated and maintained, will give satisfactory performance.
Rubber hose
1.1 quick details
Material: Steel and rubber Specification: 400~700mm, according to your requirements Length: 1500mm-10000mm
Thickness: 35~40mm, as per industry standard Standard: Iso9000, astm f714 asnzs 4130 ce, en12201 iso4427 Color: Upon request
Plastic modling type: Extruding Application: Dredging, water and slurry Connection: Flanges
Keywords: Steel wire reinforced rubber hose Installation: Flange Product name: Sand and water dredging steel wire reinforced rubber hose
1.2 packaging & delivery
Packaging details: Max's trademark, dimensions, outside diameter tolerance, designation of the pipe material, nominal pressure, pipe series, production date or code, number of the standard according to which it was manufactured, intended use of the pipe
Delivery detail: 7-12 working days
1.3 product name
Slurry dredging plastic pipe mud slurry discharge rubber hose pipe for suction dredge barge sand and water dredging steel wire reinforced rubber hose
Steel wire reinforced rubber hose applicatione
