AATCC Standard Dryer, Front-loading dryer, used with standard washer. Selected and certified for AATCC Test methods requiring repeated home laundering (methods AATCC 88 B+C, 124, 130, 135, 142, 143, 150, 172, and 179). Available in US domestic and international electrical specifications.
Standards :
Standards AATCC 88B+C, 124, 130, 135, 142, 143, 150, 172, 179
Packing & Delivery
1.Packaging:
Ply-wooden cases, inner plastic films wrapped, Sometimes we use wooden case, sometimes we use carton case. it depent how weight the machine is.
2.Shipping:
We usually send the goods to you by air, we can also delivery the equipment by sea or by express. it depends on customer.
FAQ
1. Q: What is your warranty ?
- 12 months product warranty.Free components will be provided if any performance failure occurs within 12 months caused by non-human damage.
2. Q: How-to vedio provided ?
- Yes, if required, our engineers will record a specialize how-to video for you.
3. Q: Is the machine made in your own plant ?
- Yes, welcome to visit our plant(factory), also we support OEM and ODM.
4. Q: What about the quality ?
- Each instruments must be carried out 100% quality examination and test when shipping and delivery goods.
Tag:
dryer,whirlpool dryer,whirlpool,whirlpool dryer not drying,whirlpool dryer steam,whirlpool dryer motor,dryer overheating whirlpool,whirlpool made dryer motor,replace whirlpool dryer ignitor,whirlpool dryer won't start,no shrinkage,replace whirlpool dryer coils,replace whirlpool dryer thermostat,whirlpool dryer won't start light not on,whirlpool front load washer,whirlpool washer,dryer troubleshooting,electric dryer,dryer not drying,dryers,rotary drum dryer,rotary dryer,drum dryer,dryer,rotary drum dryer working,rotary drum dryer working principle,rotary drum dryer working principle video,sawdust dryer,dryer machine,rotary drum dryers
Universal Tensile Strength Tester - 5KN Servo Universal Tensile Testing Machine
$1,500.00 - $4,500.00/ set 1 set/sets(Min. order)
Warranty:12 months, 12 Months
Model Number:QS-1065
Power:Electronic
Keyword:Tensile Testing Machine
Supply Ability :100 Set/Sets per Month
Universal Tensile Testing Machine also known as a materials testing machine , it is applicable to testing tensile stress, compressive stress, shearing force, peeling force, and elongation of materials, components, and finished product for metal, plastic, rubber, textile, synthetic chemicals, wire and cable, leather, ect.
Universal Testing Machine is widely used in wires & cables, hardware, metal, rubber, footwear, leather,apparel, fabric, tape paper products, pharmacy and so on, for tensile strength, tear resistance, peel strength, bend strength,shear force , ect with different fixtures according to national and international standards customer required.
Universal Testing Machine is a kind of electric tensile tester which uses the motor to drive ball screw to move fixture. Place the fixture with sample between the upper and lower fixture, use a given speed to pull sample upward by upper fixture. Load cell above upper fixture will sense tensile strength, and convert the strength into voltage sign and output to the display screen. And the strength value will be displayed automatically.
During the whole business process, we offer Consultative Selling service.
1)Customer inquiry process:
Discussing testing requirements and technic details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.
2)Specifications customize process:
Drawing related drawings to confirm with customer for customized requirements. Offer reference photoes to show the proucts appearance. Then, confirm the final solution and confirm final price with customer.
ps: (WLJCDM809)
keyworld:universal testing machine,tensile testing machine,universal testing machine procedure,hydraulic universal testing machine,testing machine,universal testing machines,testing machines,what is universal testing machine,universal testing machine experiment,electronic universal testing machine
UV Aging Test Chamber / UV Simulation Environment Test Machine Price
$2,070.00/set
UV ageing test chamber is suitable for the fluorescent ultraviolet lamp method in the light source exposure method of various materials in the laboratory, mainly for the changes of materials placed outdoors, the improved formula of new materials and the durability test of products.
APPLICATIONS
1.Simulate the sun, rain spray and condensation resulting damage to test the materials by exposure to sunlight with moisture and temperature.
2.To get the results of damage after several days or weeks which is equal to expose to outside for a few months. The damages include fading, discoloration, brightness down, powder, crack, blur, brittle, strength decreases and oxidation.
3.Provide reference with testing data for improvement of existing materials, or to assess the impact of changes in product durability and other aspects.
Our company Introduction:
QINSUN INSTRUMENTS is a professional manufacturer of various kinds of testing equipments over 15 years. HAIDA products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.
Why choose QINSUNï¼?
1.Excellent After sale Serviceï¼?
12 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.
2. Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
3. Good Packaging:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
Brief introduction
By softness value of the test material and objective evaluation of its feeling (touch) performance for softness test fabrics, textiles, non-woven, sanitary paper, leather and other sheet-like soft material.
At the same time, the use of different accessories, you can also test a sample of the elastic / viscoelastic / plasticity, bursting, compressibility, thickness and basis weight and other performance indicators
Product description?
The new type of concrete works softness measuring method is as follows: the main components of the instruments are a rotor, a vibration sensor and other sensors used to collect additional data and control instrument functions.
For the measurement, the sample rests on the rotor, when the rotor starts to rotate to reach the final position.
Mutual contact between the rotor and the sample so that the sample vibrate. After the vibration sensor receives the vibration signal, which is transmitted to the analysis component.
Analysis component prepared good data transfer to the computer. Then, through a complex computer calculations of these data are processed.
Use a complex formula, the parameters measured by synchronizing further parameters and customer pre-entered (the maximum you can use 68 different parameters) to calculate the value of soft.
?technical data
Software: friendly interface, simple operation. Test data can be stored for a long, always call data storage software, data were compared with the current test.
Sample size: f112.8 mm
Measurement: smoothness / roughness, softness, stiffness, feel value (hf)
Measuring pressure: 100mn, 600mn
Instrument size: 440x190x470 mm (h x w x d)
Weight: 19 kg
Power supply: 115-230 vac, 50/60 hz
Hexapod Tumbler Tester
Standards of Hexapod Tumbler Tester:
The Hexapod Tumbler Tester is a popular apparatus used in the evaluation of the appearance retention of carpets.
Product information of Hexapod Tumbler Tester:
Widely used in the evaluation of the appearance retention of carpets
Can test with underlay underneath the carpet
Provides a rapid method of test - completion within one working day
Test Method of Hexapod Tumbler Tester:
Specimens of carpet are fastened to a flexible backing sheet with double-sided adhesive tape. This assembly is fitted on the inside surface of the drum and can easily be removed at any stage for inspection of the specimens under test. If required, an underlay may be fitted beneath the carpet for direct comparison with normal use.
The drive to the drum incorporates a reversing mechanism to give more realistic pile disturbance, and the required number of revolutions may be preset on a revolution counter. The 3.8kg tumbler has six polyurethane stud feet.
The carpet specimens are treated for 2,000 revolutions, which takes approximately one hour. They are then taken out of the drum on their backing sheet and cleaned using an upright vacuum cleaner simulating practical usage. The specimens are replaced and the treatment repeated, normally six times, giving a total of 12,000 revolutions. After the final vacuum cleaning, the change in appearance is assessed against an appropriate set of ISO reference scales.
_ Drum liner
Technical Parameters:
EN 143 Automated Filtration Efficiency PFE Tester Mask Testing Machine G506 is used to test the inhalation resistance and exhalation resistance of respirators and masks under certain condition.
Usage:
Mask Particulate Filtration Efficiency Tester is suitable for fast, accurate and stable detection of particulate filtering efficiency of various medical and daily protective masks, respirators, etc.
Standards:
GB 19083,
GB 2626,
GB/T 32610,
42 CFR Part 84
JIS/T 8151
EN 149,
EN 12941,
EN 14594,
NFPA 1972
Multifunction
1. This machine can be used for different filter material
2. Customized clamp for different sample size is available
3. Both salt solution and oil solution test can run on this machine
High Accuracy
1. Support Chinese and English, menu type operating mode and large LCD display, itâ??s easy to switch
2. Two test method available: efficient test and load test
3. Simple, fast and automate operation
EN 143 Automated Filtration Efficiency PFE Tester Mask Testing Machine G506 is used to test the inhalation resistance and exhalation resistance of respirators and masks under certain condition.
Usage:
Mask Particulate Filtration Efficiency Tester is suitable for fast, accurate and stable detection of particulate filtering efficiency of various medical and daily protective masks, respirators, etc.
Standards:
GB 19083,
GB 2626,
GB/T 32610,
42 CFR Part 84
JIS/T 8151
EN 149,
EN 12941,
EN 14594,
NFPA 1972
Multifunctionï¼?
1. This machine can be used for different filter material
2. Customized clamp for different sample size is available
3. Both salt solution and oil solution test can run on this machine
Product Usageï¼?
The Particulate filtration Efficiency tester is used for performance testing of filter elements, disposable masks, filter media, etc. for respiratory protection products. It's suitable for safety testing of such products, basic filtration performance evaluation and development guidance for new products.
It is applicable to the performance verification of new products , quality control of the production department, and the of material properties for the third-party testing organization, the product performance verification laboratory, and the quality and technic al supervisiondepartment, etc.
Analog type Stable performance Fibre Fineness Tester for disordered cotton fiber
Model:QS0175
Weightï¼?12kg
Sample weight:8.0g士0.016g
Measuring rangeï¼?2.5~6.5 Micronaire value
Accuracyï¼?�±0.1 Micronaire value
Power supplyï¼?AC220V,50Hz,6w
Dimensionsï¼?250mm�?280mm�?340mm
$1,000.00 - $2,000.00/ set |1 set/sets(Min. order)
Warranty: 1 Year
Standard: ISO 2403
Power:Electronic
MOQ:1set
QS0175 Fibre Fineness Tester is used to determine the Micronaire value of disordered cotton fiber. A known air flow goes through a certain amount of sample cotton inside a tube to get the value of air resistance which display as Micronaire value.
Vibratory fineness tester can measure the fiber line density, and can directly display the linear density of single value, the average and the coefficient of variation. Besides, the external printer can print test results.Instruments and instrument line strength and elongation, can accurately test a single fiber strength, initial modulus and breaking work.
Packaging Details:
1. The equipment is covered with film is protect it from water vapour during the trip.
2. The box is filled with foam to protect the equipment from impact.
3. Exported wooden box made from plywood, don't need fumigated.
ps:(WLJCDM809)
Tag:fibre fineness tester,fiber fineness tester,electronic fibre finess tester,cotton fibre tester,wool fineness tester,fabric fiber fineness tester,micronaire fineness tester,cotton fiber fineness tester,tester,fineness analysis tester,fibre tester,fiber fineness testing machine,automatic fiber fineness tester,single fibre strength tester
