Application: for general outdoor underground cable actinobacillus operation, high-altitude stringing house switchboard construction wiring. Operation cable tray fixed seat, is not easy to sway; the use of hydraulic support, easy to operate, rapid, taking off and landing freely.
Usage: suitable for the line construction in the extension of the wire when the cable tray, lifting height can be adjusted according to demand.
These a-frame cable stands with hydraulic bottle jacks are a compact solution for spooling heavy drums of power and data cable or conveyor belts. The system comprises of two independent cable stands complete with hydraulic bottle jacks and a high tensile spindle secured in the v block.
Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer, which make duct rodder cover sliding on surface, durable,corrosion resistant and has good insulation performance, which make them safe for using in cable occupied duct. High Density polyethylene(grade: for insulating and jacketing of Telecommunication cables) is used in the outer diameter coating. Duct rodder will be equipped with different size reel according to the length of rod. There are wheels on the reel, which make it convenient for moving.
Model specification 4.5mm,6mm,8mm,10mm,11mm,12mm,13mm,14mm,15mm,16mmfor your choice, and we can also accept OEM order
Length 30,50,60,80,100,120,150,180,200,250,300,350,400,450,500 meters for choice.
Material Fiberglass (inner) and high density polytgtkebe(outer)
Density >1.9gr/cm3
Working temperature - 40 to + 80
Minimum pulling strength 4000 N5%
Tensile Modulus >46.500Mpa
Brief description:As one of biggest duct rodder manufacturers in Asia, we provide the duct rodder with high quality and competitive price. We could produce from 4 to18mm diametersduct rodder, and provide duct rodder adding with copper wire, stainless steel wire for detecting uses. So the duct rodder is also called Detectable Rodders. According to customersrequirement, We could produce different length and colorr duct rodder.
Model specification 4.5mm,6mm,8mm,10mm,11mm,12mm,13mm,14mm,15mm,16mmfor your choice, and we can also accept OEM order
Length 30,50,60,80,100,120,150,180,200,250,300,350,400,450,500 meters for choice.
Material Fiberglass (inner) and high density polytgtkebe(outer)
Density >1.9gr/cm3
Working temperature - 40 to + 80
Minimum pulling strength 4000 N5%
Tensile Modulus >46.500Mpa
Features
It is applicable to be as the support of large cable reel in laying cables in the city.
It is easy to move with the trundles in the bottom.
It can be equipped with a braking device, using the foot brake.
Hydraulic cable drum jacks, cable jack stand is used for supporting the cable drum when laying cable, with the trapezoidal structure, hydraulic cable drum jacks, cable jack stand is easy to move, and in the process of using, it is secure and durable. With the oil pressure, it can support high, simple operation and can be lifted quickly and easily.
Pulling grips styles and applications
1.Medium duty pulling grips are double weave for added strength with greater mesh contact on the cable to handle longer or heavier pulling jobs.
2.Light duty pulling grips are single weave with a flexible eye for easy attachment to a pulling line. Cable pulling grips are used in general underground electrical construction where pulling tensions are low.
3.Slack pulling grips are made of galvanized steel and come in three styles with a single offset eye for easy attachment to a pulling line. Cable socks closed, when the cable end is accessible, split lace and rod closing when cable end is not accessible. Cable grip are used in pulling slack for final placement of underground cable after cable pulling grips has been pulled and longer mesh for higher pulling loads where space is not restricted.
Cable socks / cable pulling grip
Mainly used for all kinds of wire and cable (overhead conductors, insulated cables, etc.) of tractor pay-off construction, is the electric power (or communication) line construction engineering ideal tool. According to the construction unit for decades the practice proves that we use wire and cable nets set production usage is convenient and reliable in quality. Product features: grip, reliable connect, nondestructive wires. Can smoothly through various pay-off pulley. Connection, termination is very convenient. Light weight, easy to carry, can use repeatedly.
Brief description:As one of biggest duct rodder manufacturers in Asia, we provide the duct rodder with high quality and competitive price. We could produce from 4 to18mm diameters duct rodder, and provide duct rodder adding with copper wire, stainless steel wire for detecting uses. So the duct rodder is also called Detectable Rodders. According to customers requirement, We could produce different length and colorr duct rodder.
The Cobra duct rodder is the highest quality rod, designed for heavy duty applications. The extra strength comes from a unique construction process that ensures greater rigidity and strength, enabling it to endure the additional force required for long duct runs with multiple bends and sweeps.
Model specification 4.5mm,6mm,8mm,10mm,11mm,12mm,13mm,14mm,15mm,16mmfor your choice, and we can also accept OEM order
Length 30,50,60,80,100,120,150,180,200,250,300,350,400,450,500 meters for choice.
Material Fiberglass (inner) and high density polytgtkebe(outer)
Density >1.9gr/cm3
Working temperature - 40 to + 80
Minimum pulling strength 4000 N5%
Tensile Modulus >46.500Mpa
It mainly consists of two motor, one reduction box traction head and up frame, etc. It not only applied for traction power cable, communication cable and aerial wire, also for other tranction fields in the situation of cable duct, tunnel, direct-burried, long-distance transmisson. It has small volume light weight, strong thrust force , easy to operate, so it can be used alone or coordinated with our company other conveying sets.
The cable roller can protect the cable, at the same time, cable block also can effectively reduce the friction of the cable, improve the construction speed.
Divides into according to the material quality: alloy wheels and mc nylon wheels.
Nylon wheel are pouring, larger load and bearing all adopt the harbin bearing, reduce the friction between the cable pulley and cables
Type: tubular and plate type.
Brief description:As one of biggest duct rodder manufacturers in Asia, we provide the duct rodder with high quality and competitive price. We could produce from 4 to18mm diameters¡¥ duct rodder, and provide duct rodder adding with copper wire, stainless steel wire for detecting uses. So the duct rodder is also called Detectable Rodders. According to customers¡¥ requirement, We could produce different length and colorr duct rodder.
The Cobra duct rodder is the highest quality rod, designed for heavy duty applications. The extra strength comes from a unique construction process that ensures greater rigidity and strength, enabling it to endure the additional force required for long duct runs with multiple bends and sweeps.
Model specification 4.5mm,6mm,8mm,10mm,11mm,12mm,13mm,14mm,15mm,16mmfor your choice, and we can also accept OEM order
Length 30,50,60,80,100,120,150,180,200,250,300,350,400,450,500 meters for choice.
Material Fiberglass (inner) and high density polytgtkebe(outer)
Minimum pulling strength 4000 5%
Density >1.9gr/cm3
Working temperature - 40 to + 80
Tensile Modulus >46.500Mpa
Cable grips are a quick, efficient way to install/control electrical or heavy-duty cables. Cable grips are re-usable (subject to inspection) and can also be used to support or pull any cylindrical object within their grip and load carrying capacity.
These grip offer a flexible eye and double weave stainless steel wire construction for regual load pulls.Always read breaking strength, safety and technical data informatin. The approx mesh lengthis measured at an average grip diameter.
Pulling grips styles and applications
1.Medium duty pulling grips are double weave for added strength with greater mesh contact on the cable to handle longer or heavier pulling jobs.
2.Light duty pulling grips are single weave with a flexible eye for easy attachment to a pulling line. Cable pulling grips are used in general underground electrical construction where pulling tensions are low.
3.Slack pulling grips are made of galvanized steel and come in three styles with a single offset eye for easy attachment to a pulling line. Cable socks closed, when the cable end is accessible, split lace and rod closing when cable end is not accessible. Cable grip are used in pulling slack for final placement of underground cable after cable pulling grips has been pulled and longer mesh for higher pulling loads where space is not restricted.
Uses: applicable to field construction traction hoisting machinery equipment and electric power, post and telecommunication line group made tower, traction line and cable laying.
Features: the machine installation on the belt wheel frame, convenient transportation
Brief description:As one of biggest duct rodder manufacturers in Asia, we provide the duct rodder with high quality and competitive price. We could produce from 4 to18mm diameters duct rodder, and provide duct rodder adding with copper wire, stainless steel wire for detecting uses. So the duct rodder is also called Detectable Rodders. According to customers requirement, We could produce different length and colorr duct rodder.
The Cobra duct rodder is the highest quality rod, designed for heavy duty applications. The extra strength comes from a unique construction process that ensures greater rigidity and strength, enabling it to endure the additional force required for long duct runs with multiple bends and sweeps.
1.Light weight, durable, resistance to acid and alkali, aging resistant, corrosion resistant.
2.High tensile strength and bending properties, which make it go through narrow pipes easily.
3.Perfect temperature adaptability, the product will not soften in hot weather or become brittle in the cold weather.
4.Cover was coated with long-term UV-resistant polyethylene.
5.There are meter marks on the surface of duct rodder, which can be used for measuring distance.
6.There are several colors for your choice.
Model specification 4.5mm,6mm,8mm,10mm,11mm,12mm,13mm,14mm,15mm,16mmfor your choice, and we can also accept OEM order
