Machine feature:
The machine uses the below winding design, miniature precision adjustment is more simple and easy , special winder structure design makes winding better.This machine, design of 32 bit, controller chip, , it,ll be faster and higher reliability.In, chinese and english, display, easy to operation, winding, data retention, after power failure, , not, to discarded products,all the parts for this machine are imported prats, such as:japan bearing (nsk,ntn), japan bando belt japan gates belt taiwan ball screw (tbi)taiwan transducers and so on.Four spindle, synchronous design, , uses the , cast iron body, , high speed, , low noise, , small size, is the preferred product assembly line.
Function and feature
Using the latest, synchronization, with the, coupling, cable, controller.
2with self, detection, , including, setting error, , speed, tracking and velocity, calibration.
Optional, lifting, speed of main spindle.
1with ruler function can be easily measured width and start point.
Start, moving, speed of the, spindle motor, to, climb time, to decide by yourself.
Specifications
Spindle number4
Wire size range0.04-0.45mm
Loop diameter90mm
The max wire spacing9.99mm
Winder width100mm
Spindle pitch165mm
Max speed6000turn/min
Spindle motorthree phase motor+inverter phase motor+ac drivers
Winder motorstepping motor
Input power220v, 50hz/60hz
Machine size900460600mm
Package size980670680mm
Net weight85kg
Gross weight100kg
Machine feature:
This machinedesign of 32 bitcontroller chip, it will be faster and higher reliability. In chinese and englishdisplay, easy to operation, windingdata retentionafter power failure, notto discarded products. All the parts for this machine are imported prats, such as:japan bearing (nskntn), japan bando belt japan gates belt taiwan ball screw (tbi)taiwan transducers and so on.
Heavy body architecture, winding process to make products more stable, four synchronous design, high speed, low voice, small size, is the preferred product assembly line.
Function and featur
Using the latestsynchronizationwith thecouplingcablecontroller.
With selfdetection, includingsetting error, speedtracking and velocitycalibration
Optionalliftingspeed of main spindle.
With ruler function can be easily measured width and kai winding around the point.
Startmovingspeed of thespindle motortoclimb timeto decide by yourself.
Application range
Ee transformer, ei transformer, stepping motor, relay, coil class, auto abs, switch power transformer and special products
-
Features
Inclined back design, accord with human body engineering.
Double-acting cylinder, no apprehension of spring is broken.
Using the oil and gas are two couplet, the cylinder oil regularly, reduce the internal cylinder wear and prolong service life.
The unique type slide, reciprocating stroke smooth, cutting precision
Electric control. Light and agile, operation easy
Adjustable structure, depending on the wire thickness. Suitable for short string cable diameter of wire processing. Such as: ac/dc power cord, computer wire, electronic wire, multiconductor, etc.
Such as: ac / dc, power cable, computer cable, electronic wire, multi-core lines
Modelshd-305hd-310hd-315
Stroke50mm100mm150mm
Stripping capacitymax7mmmax15mmmax20mm
Air pressure0.3-0.7mpa0.35-0.75mpa0.42-0.8mpa
Voltage220v / 50hz220v / 50hz220v / 50hz
Capacity31-73kg49-115kg84-196kg
Cylinder bore2;40mm2;50mm2;63mm
Weight20kg25kg45kg
Size400*300*270mm480*330*280mm600*420*x360mm
-
The machine uses the original imported from taiwan plc and servo motors all in english and chinese touch screen control the whole selection of imported spare parts including: japan bearing (nsk / ntn) japan bando belt taiwan (tbia) ball screw. High speed machine twisting fast low noise accurate position is the best choice for twisted products.
Function and feature:
Unique winding fixture design dress up fast.
Using a touch screen interface easy to set parameters.
With twisted features.
Installation of disconnection detection devices.
Double servo motor control excellence performance
, using high-precision magnetic tension device winding is better can save more copper
Applicationrange:
Various thin wire coil twist coil synchronous motor coil ignition coil and so on
Specifications:
Spindle number8
Wire size range0.02-0.4mm
Loop diameter70mm
The max wire spacing9.99mm
Winder width50mm
Spindle pitch70mm
Max speed 0-10000turn/min
0-11000turn/min
Max bobbin diameter 75mm
Twisted speed3000turn/min
Control methodplc ac servo motor and stepper motor drive system
Spindle motor750w ac servo motor
Winder motorstepping motor
Twisted motor400w ac servo motor
Winder direction adjustable at both ends
Input power220v60/50hz
Machine size920*900*1360mm
Weight219kg
Feature:
Taken the appropriate capacitor, led, triode, etc all radial components of artificial feeding and cutting flat foot.
A. Cut feet high accuracy, the shortest can be cut to 2.5 mm, the above is adjustable.
B. Take the plane vibration feeding way, size elements are applicable.
Taken the cutter adopts steel imported from japan, long service life.
Taken the special cutting method, knife adjustment easily.
C. Cut foot machine, motor rinou are taiwan, japan brand.
D. Can add feeding vibration plate according to the requirement (products) with the cut foot machine, cut foot realizes automatic feeding.
Modelshl- 901
Voltageac 220v / 50hz 60hz
Size450 x 470 x 380mm
Weight&160;about 35 kg
Efficiency3600-4500 pcs/h, depending on how human decision
A. For ssb type capacitors, resistors, transistors and other electronic parts automatically cut flat feet taken the applicable braid pitch: 12.5 mm or 15.0 mm (note: the pitch of two kinds of not sharing)
B. Cut feet high accuracy, the shortest foot 2.5 mm long, more than is adjustable.
C. Is suitable for mass production, save labor costs, improve efficiency.
Taken the knife for skd - 11 special imported from japan.
Taken the motors, electrical appliances are all products in taiwan
Modelshl- 902a
Voltageac110v / 60 hz, 220 v / 50 hz
Size300 x 450 x 350mm
Weight&160;about 23 kg
Efficiency40000-60000 pcs/hour
-
The machine adopts taiwan plc touch screen, ac servo motors, all in english and chinese display control. Selection of japan bearing (nsk / ntn), japan bando belt, usa gaici belt, taiwan ball screw (tbi) and guide rail and other imported parts. High speed , precision accurate, let the customer in the process of using experience to the effects of time and high production.
Function and feature:
1.Automatic winding, changegroove, and shearingthreadend of wire.
2.Can improve production , reduce wire losses, improve product quality.
Application range:
All kinds of outer micro motor , rotor .
Specifications:
Spindle number4
Wire size range0.05-0.4mm
Winding accuracy0.1
Cable accuracy0.01mm
Corner accuracy0.1
Air pressure4-6kg/cm
Max speed6000turn/ min
Spindle motor1hp servo motor
Winder motorstepping motor
Corner motor200w servo motor
Input power220v 50hz/60hz
Dimensions1220*780*1260mm
Net weight160kg
Machine feature:
The machine uses 16 control chip, simple parameter setting , with high quality steel desktop design, operation more convenient.Coil parameter can be setting by section, winding by manual, can follow one, s inclinations of the winding.
Application range:
Suitable for small transformers, relays, power converters, communications coil meter coils, fans of the stator coils.
Specifications
Spindle number1
Wire size range0.06-1.2mm
Loop diamete200mm
Winder widthhand row
Max speeda:1500turn/min
B:3800turn/min
Input powerac 120w
Input power220v50hz/60hz
Machine size43030000mm
Package size450560310mm
Net weight37kg
Gross weight45kg
-
Taken the plc control system, with photoelectric, counting
High-speed optical fiber sensor, a high degree of automation, easy to control.
A. According to your company provide customised material feeding vibration plate, linear vibration device, counting and precision control device, ensure that each bag is accurate.
To end this machine is mainly composed of host, frame, two vibration plates, counting bodies; to realize automatic feeding, automatic discharging, automatic counting, automatic packaging, in alarm (or down).
Taken the packing way as the backpack, packaging material for composite membrane
B. 15 to 40 bales/minutes (depending on the number of packages in each package).
Taken the automatic display number of packages, easy to statistics out of the work of the machine.
Taken the advanced plc control system, fault automatic stop, automatic alarm, automatic diagnosis, the use of safe and convenient.
C. Controlled by intelligent temperature controller, double road horizontal, vertical, so that the seal is firm, good sealing, pocket formation, elegant, high packing efficiency.
Taken the bag-making system adopts step motor subdivision technology, automatic tracking, positioning bags color code (optional), easily finish bag making, adjustment, speed, stable operation, low noise.
D. Have solved the problem of traditional manual hardware accessories packaging, automatic vibration cutting, automatic counting, in order to achieve the ideal packaging effect, less labor costs, improve the grade of product appearance, make the product more valuable.
Modelshl- 952
Power supplyac&160;220 v / 50 hz 60hz&160;
Power3000 w
Size1000 * 1200 * 1700 mm wide long high
Weight200 kg
Efficiency15 to 25 bags/min, (depending on the number of packages in each package)
-
