Detailed Product Description
DC 5 V Speed Limit GPRS or 3G Led Traffic Outdoor Signs with Brightness 10000 10% Nit
ITEM
DESCRIPTION
Pixel configuration
1R1W
Control Mode
Single chip
Panel size
900.5*600.5*69mm
Brightness
10000 10% Nit
Display angle
H : 1 / V : 1
Visible distance
Direct sun to the panel, beyond 100M
LED Encapsulation
Nichia DIP510
Working Voltage
DC 5 V
Waterproof level
IP65
Working Consumption
30W
Life Time
10years
Environment Temperature
-20ãC~ 60ãC
Shell material
aluminum
LED Traffic Speed Limit Screen Function:
1. 30km/h, 50km/h, 70km/h can be showed.
2. Can show temperature/humidity and single LED dot check function.
3. Automatically adjust led display brightness: Night at 20, dark day at 180 and daylight at 250.
4. PC can communicate with LED display through serial port, if remote controller, need to connect RS232 port with wireless modern, and PC can communicate with LED display through 3G or GPRS.
5. White color frame and red color fame can show very simple change.
DC 5 V Speed Limit GPRS or 3G Led Traffic Outdoor Signs with Brightness 10000 10% Nit
LED Traffic Speed Limit Screen Communication Process:
1.PC send a command to LED display Through GPRS or 3G.
2.LED display execute this command.
3.LED display make a successful feedback(if no feedback within 10 minutes, then fail, please check internet)
wooding or flighting cases
Feather
Ultimate optical performance ¡§C exceeding the highest optical classes according to EN 12966
Conformity to EN 12966 : more than 100 class-combinations of different color , luminosity , contrast , beam width , pixel pitch , LEDs ,forward current , etc. have been tested and certified by SGS/INTRON.
Cutting edge performance ¡§C Anti-aliasing for picture smoothing , Optical System , Optimized Pixel Density , True Type Fonts ,Display Luminance Intensity Regulation , Current Source Monitoring Technology , Surface Mount LEDs ¡§C provide extraordinary advantages over standard LED signs in situations where motorists have only a brief period of time to absorb and react to information.
Any application , any size , any interface , and any housing execution ( front & rear access , walk-in ) ¡§C over 150 different modules available
Connectable to any existing system ¡§C certified and proven compliance with most widely use protocols (NTCIP , TCP/IP ,PROFIBUS , XML-OPC , etc. ) ,customization to any user protocol ( numerous examples of implemented projects )
100% customizable dimensions and pixel pitches. Customizable as any other application-tailored display(size , pitch , optical proterties , consumption , service access , redundancy requirements , set of standardized accessories )
VMS Application
Generally speaking, VMS is used to communicate in real-time with motorists. VMS messages must address current conditions on the roadway by being dynamic, accurate, timely and understandable. When there are multiple requests to post VMS messages simultaneously, messages will be prioritized in the following order of importance:
1. Incident Management/Public Safety
2. Congestion Management/Motorist Guidance
3. Construction/Maintenance Activity
4. Special Events
5. Environmental
6. Law Enforcement Message
7. Public Service Campaign
VMS Small Knowledge:
When using text, care should be taken that the text can be read at a sufficient distance. One rule of thumb is that the minimum reading distance (in metres) is about 5 to 6 times the letter height (in cm). For example: a 36-cm high letter can be read at a distance of about 200 m from the sign.
When planning to install new VMS, authorities should know that the European VMS standard (EN 12966) is obligatory for all fixed VMS signs used in traffic applications. This is not yet the case for temporary or mobile VMS because the Construction Products Directive (CPD) is only valid for products that are in permanent use. An informative appendix of the European VMS standard (EN 12966) provides guidance in choosing the correct combination of the various items mentioned above.
Detailed Product Description
High Resolution Moving Road / Signage Led Traffic Signs for Outdoor Advertising
1. The visual requirements of signs set the viewing angle of the LEDs. Signs installed on highways, for example, require bright LEDs with a narrow beam width, but in cities with a requirement for short distance legibility a wide beam width LED is usually required.
2. Outdoor message signs must typically operate for over ten years in a harsh, corrosive, and exposed working environment. Dicolor LED traffic sign use new 15 and 30 degree viewing angle lamps. The maximum LED junction temperature limit of +130enables high temperature operation in bright sunlight conditions. The lamp epoxy uses UV inhibitors to reduce the effects of long term exposure to direct sunlight.
3. Applications for LED lamps in road equipment and signage include:Traffic management: Traffic signals, Pedestrian signals, Work zone warning lights, Variable message signs Commercial outdoor advertising: Signs, MarqueesSolar powered signs.
4. Dicolor-The only LED enterprise honored to pass EN12966 in China, LED Traffic Sign have been exported in Belgium, Netherlands, Turkey and other countries and regions.
wooding or flighting cases
Detailed Product Description
Automatically 1R1W Single Chip Adjust Outdoor Moving Led Traffic Signs Controlled by PC
LED Traffic Speed Limit Screen Function:
1. 30km/h, 50km/h, 70km/h can be showed.
2. Can show temperature/humidity and single LED dot check function.
3. Automatically adjust led display brightness: Night at 20, dark day at 180 and daylight at 250.
4. PC can communicate with LED display through serial port, if remote controller, need to connect RS232 port with wireless modern, and PC can communicate with LED display through 3G or GPRS.
5. White color frame and red color fame can show very simple change.
ITEM
DESCRIPTION
Pixel configuration
1R1W
Control Mode
Single chip
Panel size
900.5*600.5*69mm
Brightness
10000 À 10% Nit
Display angle
H : 15 / V : 15
Visible distance
Direct sun to the panel, beyond 100M
LED Encapsulation
Nichia DIP510
Working Voltage
DC 5 V
Waterproof level
IP65
Working Consumption
30W
Life Time
10years
Environment Temperature
-20C~ 60C
Shell material
aluminum
Automatically 1R1W Single Chip Adjust Outdoor Moving Led Traffic Signs Controlled by PC
LED Traffic Speed Limit Screen Communication Process:
1.PC send a command to LED display Through GPRS or 3G.
2.LED display execute this command.
3.LED display make a successful feedback(if no feedback within 10 minutes, then fail, please check internet)
WOODING OR FLIGHTING CASES
Detailed Product Description
Long Life White Color Fame 1R1W Single Chip Led Traffic Display Sign 900.5 * 600.5 * 69mm
ITEM
DESCRIPTION
Pixel configuration
1R1W
Control Mode
Single chip
Panel size
900.5*600.5*69mm
Brightness
10000 10% Nit
Display angle
H : 15 / V : 15
Visible distance
Direct sun to the panel, beyond 100M
LED Encapsulation
Nichia DIP510
Working Voltage
DC 5 V
Waterproof level
IP65
Working Consumption
30W
Life Time
10years
Environment Temperature
-20C~ 60C
Shell material
aluminum
LED Traffic Speed Limit Screen Function:
1. 30km/h, 50km/h, 70km/h can be showed.
2. Can show temperature/humidity and single LED dot check function.
3. Automatically adjust led display brightness: Night at 20, dark day at 180 and daylight at 250.
4. PC can communicate with LED display through serial port, if remote controller, need to connect RS232 port with wireless modern, and PC can communicate with LED display through 3G or GPRS.
5. White color frame and red color fame can show very simple change.
Long Life White Color Fame 1R1W Single Chip Led Traffic Display Sign 900.5 * 600.5 * 69mm
LED Traffic Speed Limit Screen Communication Process:
1.PC send a command to LED display Through GPRS or 3G.
2.LED display execute this command.
3.LED display make a successful feedback(if no feedback within 10 minutes, then fail, please check internet)
Long Life White Color Fame 1R1W Single Chip Led Traffic Display Sign 900.5 * 600.5 * 69mm
wooding or flighting cases
