Technical features:
1. Material: cudhp, cuag0.1, cucrzr.
2. Size:
Round copper tubes: 110~1200 mm .
Square copper tubes: 50*50~ 500*500 mm.
Rectangular copper tubes: (100~500)*650 mm.
Rectangular copper plates: (700~1000)*(300~3800)*(30~70) mm
Beam blank copper plates: (700~1016)*(280~480)*(80~140) mm
Manufactured precisely according to your drawing, and we can provide design & customize for you.
3. Coating: cr, ni-cr, ni-fe, ni-co. Meeting the demand of various customers, customize accept.
4. Taper: single taper, double taper, triple taper, quadruplicate taper, parabolic taper and various kinds of continuous tapers achieved high efficiency copper mould tubes. The taper you need will be custom-made designed by our own design team.
5. Hardness of cu-side: 95 hb min.
Customized
1.Unburned slide plate
To meet the needs of continuous casting and reducing steelmaking costs for small and medium-sized steel plant, we have developed unburned slide gate series products: unburned al-c slide plate, which adopts tabular alumina and high pure graphite, adds in proper amount of additive and antioxidant, uses phenolic resin as binder, pressed by press machine. The unburned al-c plates have the following features: no need to be burned, tar impregnated and distilled, easy processing. This product mainly used in small and medium-sized ladle.
2.Ladle upper nozzle
Adopting tabular alumina, white fused alumina, sintered spinel, flake graphite, antioxidants and phonolic resin to produce the upper nozzle, which has the advantages of thermal shock resistance stability, good oxidation resistance and corrosion resistance, fit for all kinds of ladle.
3.Ladle collector nozzle
Adopting tabular alumina, white fused alumina, bauxite, flake graphite, antioxidants and phenolic resin to produce the collector nozzle, which has the advantages of thermal shock resistance stability, strong corrosion resistance and withstands crushing etc.
Product series
1qc, 2qc, b50/60, b250, flc4200, lqcs60/80, lv50, lv150, lv180, c51, c10-40, safflow, ls50/70/90, s500, and lqvsv series etc.
1. Material: stabilized zirconia, zircon sand, alumina, graphite, aluminum phosphate monobasic acid prime wood.
2. The structural principle: the tundish nozzle is a combination of inner core and exterior. The inner core is made of stabilized zirconia and zircon sand, producing through molding machines and high-temperature calcination. The exterior is made of zirconium and corundum, producing through molding machines and low-temperature baking. Tundish nozzle is located at the bottom of the tundish, it's the channel of liquid steel to flow from the tundish into the crystallizer.
3. Function of the tundish nozzle
1). Convey molten steel;
2). Control the flow rate of molten steel.
Tundish nozzle is an important component of continuous casting. Through the tundish nozzle, the molten steel flows from the tundish into the crystallizer. During this process, the outlet aperture will be eroded and widened, the amount of molten steel per unit of time increases and the surface of molten steel in the crystallizer rises, which requires increasing casting speed to digest the excess molten steel. With the further erode and widen of outlet aperture, adjusting casting speed can not digest all the excess molten steel, then releasing the excess molten steel through the mouth of the emergency is adopted though it's a waste of steel enterprises. Therefore, whether the outlet aperture of tundish nozzle remains constant is a most important measure of the quality. Usually, it is measured through the total use time in actual production.
Our tundish nozzle has the properties of high refractoriness, good resistance to erosion, and can bear rushing scour etc.
Our customer included new shalimar, shalimar, murtza, punjab.
En steel;
2. Control the flow rate of molten steel.
Tundish nozzle is an important component of continuous casting. Through the tundish nozzle, the molten steel flows from the tundish into the crystallizer. During this process, the outlet aperture will be eroded and widened, the amount of molten steel per unit of time increases and the surface of molten steel in the crystallizer rises, which requires increasing casting speed to digest the excess molten steel. With the further erode and widen of outlet aperture, adjusting casting speed can not digest all the excess molten steel, then releasing the excess molten steel through the mouth of the emergency is adopted though it's a waste of steel enterprises. Therefore, whether the outlet aperture of tundish nozzle remains constant is a most important measure of the quality. Usually, it is measured through the total use time in actual production.
Our tundish nozzle has the properties of high refractoriness, good resistance to erosion, and can bear rushing scour etc.
Our customer included new shalimar, shalimar, murtza, punjab.