FUGE dewaxing autoclave uses the high temperature and high pressure steam to remove wax from ceramic shell mold. FUGE dewaxing autoclave adopts the Siemens control system to automate the dewaxing process. In the whole process of lost wax, our dewaxing autoclave needs no labor to operate the machine. Installed with double safety protection devices on our dewaxing autoclave, FUGE boilerclave works at reliable and safe condition.
Features:
Efficiency: Designed as an integration of the steam boiler and dewaxing chamber to save space and promote efficiency.
Easy operationï¼?Easy to operate in automatic and manual mode.
Fast: Double layers pressure vessel takes short time for pressure balance, and the time can be adjusted on certain conditions.
Stability: Siemens PLC programmable controller with strong anti-interference ability and stable performance.
Traceability: Paperless recorder to monitor the whole working status, and allow user downloads the technical process data for analysis.
Green Optional Heat Recovery Unit to save cost
Rectangular corner bellow bending machine is used to bend square bellow corner.
Tube Mill For Single Layer/Multiple Layers
1. Welding pipe diameter: DN8-150mm and DN50-300mm customized.
Braiding machine is used to make SS braiding to be put on to all kinds of tubes or hoses.
braided braiding machine can replace wires with small braiding to make big braiding. The braided braiding can bear much heavier pressure than normal braiding, widely used for various hard working conditions.
1.Range: DN10-18mm, DN18-32mm, DN32 55mm.
2.Spring bellow forming machine is used for making highly precise bellows, fast and easy.
Re-rolling Machine
1.Range: DN100-1200mm, DN 860-3000mm
2.Re-roller is used to modify the bellow's shape. It can increase the height and narrow the pitch.
3.One type is auto measured with Siemens control system, the other one is measured by operator.
1). Welding pipe diameter: DN8-150mm and DN50-300mm, customized.
2). Thickness: 0.15-1.2mm
3). Speed: 1.5-3m/min
4). Accessories welding unit: Panasonic TIG150 (made in China)
5). Voltage rating: motor 380V, argon welder 220V
6). Installed with auto cutter.
1.Range: DN6-25/ DN 32-50mm
2.Thickness : 0.15-0.3mm
3. It contains tube mill and hose forming heads, completes coil to hose production in one machine.
4.. Production is up to 50 meter per hour.
FUGE ceramic core injection machine helps you to build the most solid and precise ceramic core pieces. Our ceramic core injection machine owns 7 independent temperatures control zone as to avoid any bubbles or air pockets inside the ceramic cores. The ceramic core pattern out of our ceramic core injection machine has been approved by many turbine blades manufacturers. FUGE injection machine becomes the most advanced injection machine in this industry.
Key features:
Operation: Easy to operate in manual and automatic modes .
Reasonable structure: C-Frame to save space .
Convenience : HMI is to display the parameters of auto setting pressure .
Multi-protection: It equipped with multi-protection for nozzle position , overpressure, dual temperature , pinch hand .
Advanced Control System: Precisely control temperature,flow and pressure for injecting , to ensure the qualify of ceramic cores
FUGE wax injection machine is specially designed for producing small size, high precision and complicated wax patterns in the investment casting process. FUGE provides a wide range of wax injection machine and become the leading wax injection machine manufacturers in the industry. FUGE wax injection machine is widely used in aerospace investment casting and high end precision casting area.
FUGE wax injection machine features :
Advanced Control System:
Independent temperature control partitions(control temperature for wax of partitions);Accurate wax flow and Injection Pressure.
Convenience : Maximum memory is 50 sets parameters .
Safety : Auto alarm system to fix faults in time
continuous flexible hose forming machine
continuous flexible hose forming machine
1)Forming range: DN6 to DN16, DN18-32, DN40-50
2)Forming thickness: 0.15-0.8mm
3) Power: 7KW , 380V, 3 Phase
4) Forming Speed: 1M/ Min
5) The hose forming process is endless and continuous.
6)Continuous flexible hose forming machine is our new products, it can form 1 meter per minute. The production length of is continuous and unlimited.
1)Forming range: DN6 to DN16, DN18-32, DN40-50
2)Forming thickness: 0.15-0.8mm
3) Power: 7KW , 380V, 3 Phase
4) Forming Speed: 1M/ Min
5) The hose forming process is endless and continuous.
6)Continuous flexible hose forming machine is our new products, it can form 1 meter per minute. The production length of is continuous and unlimited.
1). Diameter: DN8-DN50mm
2). Thickness: 0.2-0.6mm
3). Speed: 1m/min
4). Welding machine: Panasonic TIG150 (made in China)
5). Voltage rating: motor 380V, argon welder 220V
6). Electric power: 6KW
7). Adjustable speed: adjustable speed motor
Our hose owns the following features:
(1)Low price. We produce various hose forming machine, so we have lower cost than others.
(2)Wide diameter range. Our machine can produce the hose minimum to DN 6mm.
(1)High quality. Our company is an experts in producing the hose forming machine.
1.It only has one welding line like the round bellow.
2.Multiple ply rectangular bellow can be formed in one time.
3.Such bellow can bear strong pressure especially for the nuclear plant.
4.Bellow size customized.
1.Range: DN8-50mm
Hose specification are as below:
The Leaching Autoclave is designed for removing the ceramic cores out of various investment casting pieces. FUGE leaching autoclave is delivered to the aerospace turbine blades manufacturers all over the world and became the most advanced equipment in the industry. Except for the ceramic core leaching autoclave, we also can customize the core leaching autoclave for aluminum core.
FUGE leaching autoclave is widely used in high end precision castings manufacturing, and turns to be the most important core equipment during the investment casting production.
FUGE leaching autoclaves help customers to remove the ceramic cores out of the precision castings under support of strong technical background.
Key features:
Efficiency : FUGE core leaching autoclave completes core leaching within several hours
Safety : FUGE core leaching autoclave has no caustic liquid and air leaking to ensure the safety of environment and operator during its running .
Stability : FUGE core leaching autoclave uses international brand key parts to ensure the reliable and stable running.
Saving cost: FUGE core leaching autoclave use caustic and water circulating system aims to save costs.
APC: FUGE core leaching autoclave is easy to operate and maintain through Siemens PLC control system and â??FUGEâ?? Advanced control technology.
Telecommunication: FUGE core leaching autoclave has remote monitoring system facilitates the diagnosis and maintenance of the autoclave
Vacuum precision casting furnace is designed for Melting heat-resistant high-temperature alloy material,and Casting of Equiaxed under vacuumed condition as well as for directionally solidified (DS) or single crystal (SC) structures
Automatic Bellow Forming Machine.
1.Range: DN100-1200mm, DN100-1600mm.
2.Patent:Auto rotating salver and auto cone retraction system.
3.Siemens control system and HMI input screen.
4.It contains 3 working positions and can form 3 bellows at the same time.
5. It's powerful enough to form various thick SS and Inconel alloy.
6. It can form different height and pitch automatically.
1.Range: DN6-25/DN 32-50mm.
2.Thickness:0.15-0.3mm.
3.Continuous annular hose forming machine includes 2 parts: pipe welding & hose forming. Insert the stainless steel sheet into the machine, it can form the required hose directly.
4.It can be updated to form annular hose as flexible as spring, 1/4 of original pitch can be reduced.
5.The hose length is unlimited because of the continuity of the machine.
6. Easy operated, but highly productive with more than 50 meter per hour.
1.DN25-150mm, DN50-300mm, DN80-400mm
2.Double layer can be formed.
3.Production :12-16 convolutions/ min
Automatic bellow forming machine
1). Range: dn100-dn1600mm
2). Power: 5.5kw
3). Control type: automatic
4). Form speed: 15min/each one
Automatic bellow forming machine
1). Range: dn1000-dn3000mm
2). Power: 7.5kw
3). Control type: automatic
Automatic bellow forming machine
1). Range: dn1000-dn3000mm
2). Control type: automatic
(1)we provide rubber expansion joint dn40, 50, 65, 80, 100, 125, 150, 200, 250, 300mm.
(2)we can also produce double sphere.
(3)low price. We produce various hose forming machine, so we have lower cost than others.
(4)wide diameter range. Our machine can produce the hose minimum to dn 6mm.
(5)high quality. Our company is an experts in producing the hose forming machine.
Pls contact:tina.Li@fugeco.Com
(1)we provide rubber expansion joint dn40, 50, 65, 80, 100, 125, 150, 200, 250, 300mm.
(2)we can also produce double sphere.
(3)low price. We produce various hose forming machine, so we have lower cost than others.
(4)wide diameter range. Our machine can produce the hose minimum to dn 6mm.
(5)high quality. Our company is an experts in producing the hose forming machine.
Tube Expander
1.DN100-1200mm
2.Tube expandercan expand the pipe of 6mm thickness.
3.The step height of the tube expander is designed by special requirement.
·4.It's installed with Siemens system to control the expanding stroke of the steps.
1.Range:DN100-1000mm
Thickness:4mm(Multi-layer)-10mm(Multi-layer)
