PDLC (Polymer Dispersed Liquid Crystal) film is a part of electronics that can actively adjust the penetration ratio of solar light. This is a new material that adjusts the penetration of visible rays according to the presence or absence of electricity. It can modulate 1/1000 second depending on whether authorized or not.
Product Color : Millky White, Gray
Product Type
Lamination : Using the connetion between the glass
Adhesive : Using the paste direct the glass
High penetration ratio
(OFF) 99%, (ON) 6%
Operation temperature
(not transition on 100¡É)Smart VU film is stable on high temperature
Adhesive Bonding Strength
(peel strength 130g/in)Smart VU film is excellent in durable better than competitor company by surface adhesion
strength.
Flexing
Smart VU film is stable highly once pressing or bending.
Bestroom
Product feature
Haze rate(ON) <6% Haze rate(OFF) >99%
Penetration rate(ON) >80%
Penetration rate(OFF) >0.8%
Rated voltage 60V~110V
Power consumption <5W/sqm
UVcut ratio >99%
Operation temperature -20~100
Adhesion strength 130 [ASTM D903]
Film splicing PVB Film possible
The water-proofing and rust-preventing jobs are accomplished by ink-coating the edges of mirror. The coating time is greatly reduced as compared to the edge coating of using existing IR and paraffin. Also, it is designed to improve productivity by simplifying the production process and by minimizing the defective rate.
PDLC(Polymer Dispersed Liquid Crystal) film is a part of electronics that can actively adjust the penetration ratio of solar light. This is a new material that adjusts the penetration of visible rays according to the presence or absence of electricity.
It is laminated with PDLC film from two transparent conductive coated PET. PDLC film consist of droplets of liquid crystal dispersed in a matrix prepolymer binder. The PDLC film has liquid crystal droplets with a bipolar alignment. In the absence of an electronic field the droplet director are randomly aligned and in general the refractive index of the droplet is mismatched with that of the prepolymer and the materials scatter light. In on state, the film of the PDLC can be switched to an index matched and transparent state by application of an electric field aligning the drioplet director parallel to the applied field.
For design to be molding onto plastic films. BE RF70/50 enable instant fabrication of various shapes and textures. It is coating and designed to be molded onto PC film and PET film without primer. Set up costs are minimal compared to similar performing molding resin.
