Dlds-1508 industrial robot application training system consist of training platform, spare parts store, four axis berger lahr mechanical handling unit, ring assembly inspection mechanism, abb six joint industrial robot assembly sorting unit, visual detection device, finished product storehouse.
The main task of the device is based on mes management software, order demand, berger lahr robot grab the corresponding to red or yellow, blue button cap and other button assembly parts from the spare parts store. And the assembly part is placed in fixed position of ring assembly detecting mechanism. Then assembly structure detection is rotated 180 degrees, reach the assembly inspection station of robot with six degrees of freedom. Robot with six degrees of freedom carrying on the button assembly, after the completion of the assembly, the power supply mechanism send electricity to the button. The robot press the button, then through vision cameras to detect and judge the buttons color and quality, the six degree of freedom robot according to the data of the vision camera for classification. Thereby it is carried on the finished product store.
The trainer integrated wind power, pv hybrid technology, can be used to finish experiments like solar power generation and solar power generation charging/discharging, inverter power etc.
Ii. Product features
The trainer adopt vertical structure, panel use standard mesh plate, experiment modules are fully exposed, integrated with wind speed measurement and alarm system, complete closed-loop control mode allows users to operate more conveniently.
Wind and solar hybrid power generation control system adopts 16-bit high-performance mcu, effect intelligent control of battery charge/discharge and fan brake.
Off-grid inverter module boot front-end adopts 8-bit mcu control, front and rear axles adopts imported mosfet enable more stable performance, thus can provide a stable 220v pure sine wave ac power during learning process.
Wind and solar power trainer easy to move and convenient to use.
This Training set adopt Germany teaching training mode including all technology of safety using electricity. It is very convenient to experiment.
It is going to be the ideal teaching tools of all vocational schools
II. Feature
This set is according to DIN standard (equal to GB/T 13869-92)
This Training set adopt Germany teaching training mode including all technology of safety using electricity. It is very convenient to experiment.
This set is modular structure which composed by 22 independent modular. Including power box, body resistance modular, body electric shock modular, step voltage modular, safety ground modular, direct electric shock modular, Indirect electric shock modular. This set include various protective measures such as leakage protection modular, short-circuit protection modular and insulator monitor modular.
DLPLC-X1 programming logic controller training system is a professional training platform developed for vocational and advanced education, which is designed for some curricula in various schools and colleges such as programming logic controller technology, programming logic controller principle and application, PLC application technology, PLC principle and application, and so on.
Accomplish experiment contentsï
1.Basic electric control
a) Lights on control
b) Lights out control
c) And logic control
d) Or logic control
e) Logic combination contro
f) Relay self-lock control
g) The usage of proximity sensor
2. Hydraulic control circuit
a) manual shuttle valve reversing circuit
b) solenoid valve reversing circuit
c) lock circuit
3. Pressure control circuit
a)Single grade pressure regulating circuit
b) Secondary level pressure regulating
c) Single pressure reducing circuit
d) Level 2 pressure circuit
e) The unloading circuit using manual shuttle valves
f) The unloading circuit using pilot relief valve
g) The balance circuit using the sequence valve
h) Liquid control one-way valve pressure maintenance.
i) The one-way back pressure circuit using using relief valve
3. The flow speed circuit using throttle valve
4. Speed regulator circuit using speed regulator valve
a) Enter oil-way throttle speed regulation
b) Back oil-way throttle speed regulation
c) Side oil-way throttle speed regulation
d) Speed synchronous circuit of the speed regulation valve
e) Parallel circuit of the speed regulation valve
f) Series circuit of the speed regulation valve
5. fast moving circuit of hydraulic cylinder connection
6. Sequence action circuit using sequence valve
7. Sequence action circuit use stroke switch control
8. Sequence action circuit use pressure relay control
9. One-way atresia circuit use hydraulic control one-way valve
10. Double-way atresia circuit use hydraulic control one-way valve
11. Locking circuit use o type manual shuttle valve
12. Relay control hydraulic basic circuit
13. The other circuit design by themselves
Digital circuit experiment box is the basic experiment teaching instrument of â??digital circuitsâ?�, â??pulse circuitâ?� and curriculum designing. When this product was designed full considerate the experimental teaching characteristics, elaborate design, product performance is stable and reliable, and experimental flexibility, to cultivate the students' practical ability, is an ideal teaching equipment in the higher colleges, the professional technical institute, the technical secondary school.
II. Equipment system function
Digital circuit experiment box motherboard is made of 2 mm thick printed circuit board, front printed with components graphic symbols and relevant attachment, opposite is printed wire, and welding related components, the motherboard set with several high reliable multi-function chips socket (20 P, 40 P), several high reliable silver coating long copper tube, for insert resistor capacitor, diode and the transistor, etc, and with the universal bread board for insert all kinds of components. Also has more than 200 high reliable locking type turn fold socket (and internal connect with integration piece socket, silver coating long copper tube and fixed devices), when as an experimental connection, test points, experimental wiring, just take lock plugs wire to connect with each other. The experiment box adopts high-strength aluminum alloy, appearance is elegant.
Experiment project
1. DC motor experiment
a), recognize experiments
b) DC generator
c) DC shunt motor
d) DC motor start: series resistance start, reduction voltage start
e) The method of DC motor change veer
f) DC motor speed regulation characteristic experiment: change the armature loop in resistance, excitation circuit in a resistance, to reduce the armature voltage
2. Single-phase transformer experiment
a) Single-phase transformer variable ratio K
b) Single-phase transformer no-load experiment, acquisition transformer no-load data IO, PO and UO.
c) Single-phase transformer short-circuit experiment, acquisition transformer short-circuit data UK, IK and RK.
d) Single-phase transformer load experiment, acquisition transformer load data UZ = f (IZ).
3. Three-phase transformer experiment
a) Three-phase transformer winding polarity measurement
b) Three-phase transformer coupling group measurement
4. Asynchronous motor experiment
a) Three-phase winding asynchronous motor stator resistance test
b) Three phase asynchronous motor no-load experiment: acquistion no-load voltage U0, current I0, three-phase power P0, draw no load characteristic curve
c) Three phase asynchronous motor short circuit experiment: acquistion shorted UK voltage, current IK, power PK, draw short circuit characteristic curve
d) Calculate three phase asynchronous motor parameter
e) Mechanical properties of three phase asynchronous motor in various operation conditions
1. The four truckle with crack slot in order to move and install on the work table. Due to the point and height of the panel is adjustable, convenient for efficient experiment. Panel grooves intervals are 25 mm, can easily move all kinds of components insert on it.
2. Various pneumatic components into separate module which is equipped with bottom panel of elastic pins, when training they can build all kinds of pneumatic circuits on general aluminum, fast loading and unloading, flexible layout, clear pneumatic circuit.
3. Use mute air compressor, low noise operation, provide good training environment for the training room.
4. Pneumatic circuits using fast connection, convenient student build pneumatic circuits rapidly. The electric control circuits adopt special training of with protection inner energy connect wires, students can design themselves pneumatic application system, can exercise the student's practical and thinking ability of theory combine with practice, has strong training.
5. Electrical control units used for independent relay control unit and multi-button unit control electrical, simple and clear! In addition the user can also choose PLC programmable controller, to deepen the understanding and mastery of PLC programmable controller. PLC programmable controller and PC microcomputer communication realize microcomputer intelligent control. Another the way of PLC control combines with traditional relay control strengthen the students understanding to the control theory.
6. High safety: have over-current protection ,the power supply will cut off as earth leakage exceed 30mA;the electrical control use DC 24v power supply ,with over current protection ,can prevent damage to the equipment caused by improper operation .system nominal pressure is 0.6MPa.
