l, thickness 3.00mm. 2. Internal limiters, no bump stops or crush points. 3. The joints' welding is at least 2/5-1/2 inch thick. 4. The bearings are made of cast steel with cast steel rollers, and do not require re-lubrication. 5. All pedals and stepping platforms are made of impact absorbing plastic for comfort and safety. 6. After fabrication and welding, all parts areanti-corrosive powder coated for rust protection. 7. All metal parts receive two layers (120-400 microns) of dupont powder coat. 8. An additional layer of polyurethane uv3 (450 microns) is applied to all metal parts for ultraviolet protection. Warranty: in light of the quality of our products and the manufacturing process, we are proud to offer a warranty: 15 years on all pipes, foundation and welding. 3 years on all moveable parts, plastic and rubber. One of the best warranties in our industry. For detailed information on our warranty, please see our catalog.
Bubble plastic bag and pp bag
Workmanship Specification:
Produced under ISO 9001 Quality Management System,conform to TUV-GS DIN 79000 standard.
Materials:high quality steel and hot galvanized steel is optional.
Main pipe thickness is 3.00mm,supporting part is 2.75mm.
Sand blasting machine to clean the rust before coating.
Powder coating:electrostatic coating, lacquer that bake treatment. first layer epoxy powder(50-80um),second layer plastic powder(90-140um).
Welding technique:arc-welding,cabon-dioxide welding,mixed-gas welding.
Stainless screws and nuts.
Bearings are from NSK.
ilding.
Direction: Hanging up the round pipe with feet, crossing the hands behind head, making Body backward to the trainer then recover.
Workmanship specification:
Produced under iso 9001 quality management system, conform to tuv-gs din 79000 standard.
Materials:high quality steel and hot galvanized steel is optional.
Main pipe thickness is 3.00mm, supporting part is 2.75mm.
Sand blasting machine to clean the rust before coating.
Powder coating:electrostatic coating, lacquer that bake treatment. First layer epoxy powder(50-80um), second layer plastic powder(90-140um).
Welding technique:arc-welding, cabon-dioxide welding, mixed-gas welding.
Stainless screws and nuts.
Bearings are from nsk.
Product name:outdoor fitness with tuv gs---double-unites rambler (txj-l034)
Size ty of lower limbs, and enhancing the flexibility of the hip joint.
Direction: hold crossbeam with hands, stand on the pedal and swing legs back and forth just like walking.
Raw materials: high quality steel/ hot-galvanized steel ( dn140 / dn89)
Powder coating: zinc-rich premier and powder coating( 2 times )
Sand blasting procedure ( before powder coating)
Welding technique ( arc-welding, carbon dioxide welding, mixed-gas welding)
earing : nsk
Uv eu standard
Main pole thickness is 3mm, portable parts thickness is 2.75mm.
the main-pole cover is made of aluminium and the inside is a galvanized pipe.
Stainless screw and nuts outside, galvanised inside.
the seats are pe .
the pedals are epdm coated to ensure grip
1600*760*1120mm
Workmanship specification:
Produced under iso 9001 quality management system, conform to tuv-gs din 79000 standard.
Materials:high quality steel and hot galvanized steel is optional.
Main pipe thickness is 3.00mm, supporting part is 2.75mm.
Sand blasting machine to clean the rust before coating.
Powder coating:electrostatic coating, lacquer that bake treatment. First layer epoxy powder(50-80um), second layer plastic powder(90-140um).
Welding technique:arc-welding, cabon-dioxide welding, mixed-gas welding.
Stainless screws and nuts.
Bearings are from nsk.
Product name:outdoor elliptical trainer (txj-l012)
Si capacity:2000 pcs/month
Function: developing the whole body joints, strengthening cardiac and pneumonic function, and shaping figure.
Direction: putt your feet on the pedals, holding the handles with your both hands and moving your hands and feet alternately.
Workmanship specification:
Produced under iso 9001 quality management system, conform to tuv-gs din 79000 standard.
Materials:high quality steel and hot galvanized steel is optional.
Main pipe thickness is 3.00mm, supporting part is 2.75mm.
Sand blasting machine to clean the rust before coating.
Powder coating:electrostatic coating, lacquer that bake treatment. First layer epoxy powder(50-80um), second layer plastic powder(90-140um).
Welding technique:arc-welding, cabon-dioxide welding, mixed-gas welding.
Stainless screws and nuts.
Bearings are from nsk.
Pro ands, making your lumbar spinal cord abut against the crossbeam of the massager, move slowly up and down, left and right.
Workmanship specification:
Produced under iso 9001 quality management system, conform to tuv-gs din 79000 standard.
Materials:high quality steel and hot galvanized steel is optional.
Main pipe thickness is 3.00mm, supporting part is 2.75mm.
Sand blasting machine to clean the rust before coating.
Powder coating:electrostatic coating, lacquer that bake treatment. First layer epoxy powder(50-80um), second layer plastic powder(90-140um).
Welding technique:arc-welding, cabon-dioxide welding, mixed-gas welding.
Stainless screws and nuts.
Bearings are from nsk.
Product name: outdoor fitness equipment with tuv gs--- rambler (txj-t009)
Size: 2531*830*1500mm
Vol
Function: developing the strength of upperlimbs, chest and muscle groups of shoulder and back, improving the flexibility and stability of shoulder joints and elbows.
Direction: hold crossbeam with hands, standing on the pedal, swing legs forth and back just like walking, but do not swing your legs forward or backword at the same time.
