(3) low linear shrinkage
(4) resistance to high-temperature
(5) low shrinkage and non-deformation
(6)resistance to acid-alkali and expansion
Liquid silicone rubber for gypsum operation instructions
Step one: take 100g of part a and add 2g of part b and mix the silicone rubber and curing agent evenly.
Step two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: the time for vacuum-pumping should be less than 3¡a5 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step three: pouring the mixture into the frame with original gypsum mold slowly .
Shelf life for liquid silicone rubber
10~12months, when stored in a dry & cool place under the room temperature 25.
Packing for liquid silicone rubber
1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing, 200 kg/drum
25kg/drum and 200kg/drum
Pad printing silicon rubber usages:
Pad printing silicone rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass , electroplating toys and trade makers and so on .
Pad printing silicon rubber description
Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
.
Pad printing silicon rubber features:
3) Good printing effects
4) Permanent and durable
Pad printing silicon rubber operation instructions:
. Step one: take 100g of part a and add 2g of part b and mix the silicone rubber and curing agent evenly.
Step two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: the time for vacuum-pumping should be less than 3¡a5 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
25kg/drum and 200kg/drum
Description of platinum cured silicone rubber
Platinum cure silicone rubber is a kind of fda grade silicone , generally named two-components silicone rubber with translucent appearance, part a and part b mixing in 1:1 .It¡¡¥s suitable for molds making application.
x the two part evenly.
Step two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: the time for vacuum-pumping should be less than 3¡a5 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step three: pouring the mixture into the frame with original mold slowly .
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kg/drum for part a+ 20kg/drum for part b in one set
, 200 kg/drum for part a+ 200kg/drum for part b in one set
For getting further information about our silicone product, pls contact with miss emily
Tel: 0086-755-89212382
Email: hyxa(at)szrl(dot)net
Welcome to visit www (dot)szrl (dot)net .Anytime .
25kg/drum and 200kg/drum