Eps pre-expander specifications:
ItemUnit\model Psf140ii(first, second foaming)Psf140 i
(first, second foaming)Psf120
(first foaming)
Barrel diameterMm 140014001200
VolumeM3 2.83.11.8
Steam pressureMpa 0.4-0.60.6-0.80.6-0.8
Compressed air pressure Mpa 0.6-0.80.6-0.80.6-0.8
Foaming densityKg/m3 4.5-304.5-408-40
Production capacityKg/h 500-600400-80015-450
Installed powerKw 21.920.4517.4
External dimensionsMm 3450*2100*45004500*2150*29503000*1260*3650
Installed weightKg 295025001750
Eps block machine specifications:
ItemUnit\modelPsb-q200Psb-q300Psb-q600Psb-q800
Net internal size of mould chamberMm2040x1020x5303060x1250x6306100x1240x6308120x1240x630
Volume of mould chamberM31.102.414.776.34
Product density/specific weightKg/ m34.5-304.5-304.5-304.5-30
Production efficiency( standard condition)Piece/h4-84-94-96-9
Steam pressureMpa0.6-0.80.6-0.80.6-0.80.6-0.8
Compressed air inlet diameterMm65656565
Steam inlet diameterMm1001000150150
Power supplyV380380380380
PowerKw79.51515
Max. External dimensionMm3600x2000x27504500x2150x29507500x2150x29509500x2150x2950
Installed weightKg30004500950010500
Eps cutting machine specification:
ItemUnitPsq300Psq600Psq800Multi-functional cutting machine
Max. Size of productiveMm3000x1250x12506000x1250x12508000x1250x12506000x1250x1250
Transformer capacityKva5.25.25.215
Total power of installed machineKw6.556.556.5517.45
Max. External dimensionsMm5800x1900x24808800x1900x248010800x1900x24808800x1900x2400
Installed weightKg1200180022002800
In wooden case, plastic paper or wrapped with film, etc.
Specification of eps pre-expqanding machine:
Item Unit\model Psf140ii(first, second foaming) Psf140 i
(first, second foaming) Psf120
(first foaming)
Barrel diameter Mm 1400 1400 1200
Volume M3 2.8 3.1 1.8
Steam pressure Mpa 0.4-0.6 0.6-0.8 0.6-0.8
Compressed air pressure Mpa 0.6-0.8 0.6-0.8 0.6-0.8
Foaming density Kg/m3 4.5-30 4.5-40 8-40
Production capacity Kg/h 500-600 400-800 15-450
Installed power Kw 21.9 20.45 17.4
External dimensions Mm 3450*2100*4500 4500*2150*2950 3000*1260*3650
Installed weight Kg 2950 2500 1750
Specification of eps shape molding machine:
Item Unit \ model Psz120 Psz140 Psz175 Psz2000
Mould size Mm 1200x1000 1400x1200 1750x1450 2000x1600
Finished products size Mm 1000x800x330 1200x1000x330 1550x1200x330 1800x1400x330
Mould opening distance Mm 1400 1620 1620 1620
Steam consumption Kg/cycle 7 9 10 11
Steam pressure Mpa 0.6-0.8 0.6-0.8 0.6-0.8 0.6-0.8
Cooling air consumption Kg/cycle 45-138 50-150 60-190 65-200
Compressed air consumption M3/ cycle 1.5 1.8 2 2.2
Compressed air pressure Mpa 0.6-0.8 0.6-0.8 0.6-0.8 0.6-0.8
Vacuum pump air suction amount M3/h 165 230 280 280
Production cycle Sec 60-150 60-150 60-150 60-150
Installed power Kw 9.1 12.1 14.1 14.1
External dimension Mm 4600x1850x3300 5000x2050x3700 5000x2400x4000 5000x2650x4150
Installed weight Kg 3200 4300 4850 5300
In wooden case, plastic paper or wrapped with film.
1 raw materials and coke are filled automatically to the top of the cupola entrance.
2 these objects melt and flow out from the bottom of the cupola into the vortex spinning machine.
3 together with a small amount of adhesive and oil, the melt subject generates the filamentous fibers in the vortex spinning machine.
4 filamentous fibers were spun into cotton which conveyed through the rollers.
5 after structure and density adjusted, they enter the curing oven.
6 products out from the curing oven are cutted by the sawing machine.
7 packaging or special handling.
Environment friendly:
Waste gas produced by the blast furnaces, spinning machine and curing chamber will pass through the filters to filter.
After burning treatment, it was discharged through the chimney.
The waste during the production process will be recycled.
Products specification:
Products
Density(kg/m3)
Size
Length(mm)
Width(mm)
Thickness(mm)
Panel
40-200
1000(adjustable)
500-2000
30-150
Felt
40-100
1000(adjustable)
1200
30-100
Stitching felt
40-90
1000(adjustable)
1000-1200
40-100
In wooden case, plastic paper or wrapped with film, etc.
As a professional manufacturer of polystyrene machine in China, our company can supply our clients the European Standard machines. Clients' satisfaction is our first priority.
Product introduction:
1 With reasonable structure, the machine is easy to operate with completed functions.
2 The plate is formed through such processes as feeding, profiling , dispensing, heating, trimming, gouging and cutting.
3 The machine adopts precise low-speed metering pump, frequency control (or stepless speed variation) with computer control and dose is accurate.
4 It can produce flat plate and corrugated sheet of many specifications and models, including the sandwich panel with thickness of 40-300mm and width of 950-1200mm, and corrugated high-intensive composite board with thickness of 40-300mm and width of 950-980mm.
5 This machine applies to color steel plate, aluminum plate, stainless steel plate and so on.
Technical parameters:
Item
Specification
Raw material
Normally 0.2-0.6 aluminum or color steel
Speed
3-6m/min (Depend on the working temperature)
Cutting type
Trace flying saw cutting
Drive
Chain drive
Electric control system
PLC frequency conversion control
Core material
EPS board or rock wool
Total power
35kw
Power supply
380V/50HZ Or Customized
Annual Output
600 thousand square meters
Product width
950-1200 mm (Flat Plate)
950-980 mm (Corrugated Composite Board)
Product thickness
40-300mm
Equipment overall dimension (mm)
24000*2100*2600 / 29500*2100*2600
Laser cutting and hole drilling processing ensures the precise standard of the spare parts.
The rough and the further processing guarantee the high quality of the spare parts.
The heating treatment bring the chain plate a high strength, non-deformation and high resistance to the expansive force from high-density products.
Painting makes the machine be waterproof and antioxidation.
All of these ensures a longer term service than ordinary machine.
The sandwich can be EPS or rock wool.
While the plate can be color steel plate, aluminum plate, stainless steel plate and so on.
In wooden case, plastic paper or wrapped with film, etc.
The Production Line Concludes:
Nc Cutting Machine, H Beam Assembly Machine, H Steel Gantry Automatic Welding Machine Or Dual Cantilever Automatic Welding Machine, H Beam Flange Straightening Machine, H Beam Shot Blasting Machine Equipment.
Production For Standalone Operation, The Workpiece Transporter Rely Crane Lifting, The Entire Line Is Relatively Flexible, You Can Add A Different Segment Of The Process Equipment To Improve Production Efficiency.
H Steel Assembling Machine Specifications:
Dimension Of Web PlateHeight200-1200mm
Thickness6-32mm
Length4000-15000mm
Dimension Of Wing PlateWidth200-600mm
Thickness6-40mm
Length4000-15000mm
Assembling Speed500-1200mm
Installed Power7.5kw, Exclusive Of Welding Power Supply
Transmission Speed0.5-6.0 M/min
H Steel Door Type Submerged Arc Welding Specification:
Dimension Of Applied H SteelWidth200~800mm
Height200~1200mm
Length2000~12000mm
Diameter Of Applied Welding Wire3.2~5mm
Positioning Speed3000mm/min
Welding Speed250~750mm/min
Gauge4000mm
H Steel Flange Leveling Machine Specification:
Width Of FlangeThickness Of FlangeMin. Height Of FormerLeveling SpeedPower Supply
200-800mm6-40mm200mm9000mm/minAc380v50hz
In Wooden Case, Plastic Paper Or Wrapped With Film.
