Simatic dp, bus connector for profibus up to 12 mbit/s 90 degree angle outgoing cable, 15, 8 x 64 x 35, 6 mm (wxhxd), terminat. Resist. With isolat. Function, without pg socket
Introduction:
Cp5512 is the isolated profibus/mpi/ppi/fwl communication card specially for laptop, use icoupler isolators eliminate optocoupler limitations instead of photoelectric isolation, with small dimension, wide temperature range, and have anti-lightning and surging protective circuit and overcurrent protection with restoration function on the rs485 interface, all use industrial ic in order to apply to wider temperature range, is used to achieve profibus/mpi/ppi/fwl communication connection between laptop and simatic.
Cp5512 insert laptop pcmcia slot from outside. Its function and features is the same as siemens original cp5512(siemens part nr 6gk1551-2aa00 ), and have the following new characters.
Technical specification:
Transmission rate: 9.6kbps12mbps, the corresponding largest communication distance accord with profibus standard.
Interface:connect profibus/mpi/ppi, isolated 9 pin sub-d connector.
Isolated voltage:1000vdc
Interface protection:have anti-lightning and surging protection(ipp=100a 10/700us, 4kv) on the rs485 interface.Itu-tk20/21, vde 0433 standard. 15kv esd protection. Overcurrent protection with restoration function£ºrs485 port can withstand up to 60v voltage caused by continuous over-current.
Support hardware of cp5512:
different from pc adapter and pc adapter usb, cp5512 supports much more hardwares, such as siemens s7-200/300/400plc, ppi/mpi/profibus interface of touch panel, em277, et20 and other hardwares with profibus/mpi/ppi/fwl interface.
It need profibus cable or mpi cable(siemens part nr 6es7 901-0bf00-0aa0) when cp5512 communicates with fieldbus devices.
Standard working voltage:3.3 vdc
Power£º1.0w
Working temperature£º-20+75¡æ
Size£ºlength* width * height(mm)£º130¡Á54¡Á5£¡§db9f plug height:22mm£©
Weight£º70g
Introduction
Usb/ppi+ programming cable simulates usb port as traditional serial port (usually com3), which enables existing programming software(step 7-microwin) to communicate through simulated traditional port and plc devices.
The working power supply of this cable is from the usb port and plc programming interface. The two-color led on the converter box indicates datas transceiving status.
Usb/ppi+ is optoelectronic isolated, suitable for siemens s7-200 series plc, especially for the strong interfere and easily damaged communication interface industry scene.The safeguard in the circuit guarantees the safely running of the system.
Functions
Support windows2000/windows xp
Support step7 micro/win v3.2 and higher
Fully compatible with usb v1.1 and usb cdc v1.1
Power supply by usb bus and plc programming port.
Baud rate: 300 bps ~ 1mbps automatically adapt to the standard baud rate.
Support uart data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd / even / no parity
Support long distance communication up to 2000m(9600 bps).
Working temperature -20~+75'c
Length 3 meters.Color:black
One pc supports one usb programming cable only
System requirement
Please make sure your pc is ibm pc compatible and has the following system requirements before using the usb programming cable.
Intel is compatible with 586dx4-100mhz cpu or higher
A standard usb port (4-pin a plug)
Operating system is windows2000 or windows xp
Weight£º0.35kg
