Features :-
Wooden/m.S duley power coated /stainless steel body.
Hepa filter
Pre-filter
Blower (motor blower assembly)
U.V. Light
Fluorescent lamp
Operating switch
Pressure gauge (manometer)
Stainless steel table
High quality hepa filter provides protection for the product (filtration efficiency of more than 99.97% at 0.3 micron.
Ultra-quiet noise level of not more than 65 dba.
Durable and easy to clean stainless steel work.
Cock for gase or vacuum line.
Work area properly illuminated by diffused glare free fluorescent light.
Optional accessories :-
Particle dust count-validation at site.
Timer for u.V. Lights.
Speed regulator
Caster wheels.
Magnahelic manometer.
Specifications:-
Standard size (working area) 2' x 2', 3' x 2', 4' x 2', 6' x 2', 8' x 2'
Air velocity 90 ± 20 cfm (average)
Filtration elements Main filters : hepa filter
Prefilter: washable non-woven polyester fibers.
Filter efficiency Main filters : 99.97 at 0.3 micron
Prefilter: arrestance 90%, at 10 microns
Work Stainless steel
Noise level< 65 dba
Light intensity800-1000 lux
Power supply220v single phase, 50 hz.
Wooden packing
The biological safety cabinet is similar in performance and specification to the vertical series, described on reserse.
The additional main features are as under:-
Specially suited for wet processing, water fab, chemical work, critical biological work involving virus and pathogens & for microbiology, biochemistry etc.
Standard s.S. Table peripheral or fully perforated.
Integral powerful exhaust system. Built-in-positive air curtain effect to prevent inside air from going out and room air from entering in, providing total process and operator safety.
Exhaust ducting to carry the air outside.
Front sliding door, u.V. Light, manometer, gas cock etc. Optional.
Air flow:- 70% of the air is recirculated back into the work area and 30% of the air is hepa filtered and exhausted out to the environmental via a dedicated duct without mixing with the recirculated air.
Standard size:-2' x 2'
3' x 2'
4' x 2'
6' x 2'
8' x 2'
Face value:- a cafe velocity of 90±20 cfm is maintained.
B.O.D. Incubator is the most versatile low temperature indicator for biochemical oxygen demand determination .Castor wheel mounted cabinet is double walled with inner chamber of stainless steel and outer casing of m.S. Sheet duly painted. The gap of 75mm between the outer and the inner wall is filled with special grade glass wool to prevent thermal losses. Tripple walled back of the unit is fitted with two air circulation fans for maintaining the temperature uniformally throughout the chamber. Heating elements of nicrome wire are placed in the air path and are duly insulated from the body. The inner chamber is ribbed for placement of shelves at desired heights. Full view inner glass door permites inspection of specimens, without disturbing the same. Lock and key arrangement is provided in the double walled outer door. Unit is fitted with door operated illumination lamp inside the chamber. The temperature range from 5ºc to 50ºc is controlled by digital temperature controller cum indicator. Refrigeration unit is formed by hermetically sealed isi marked shriram make compressor and the cooling coil are distributed all round the chamber and lie in the air circulation path. Panel consist of seperate indicator lamps for mains, heating and incoming voltage. Supplied complete with 2/3 shelves, cord and plug to work on 220/230v a.C. Supply.
Available sizes:-
Inside chamber (wxhxd)CapacityLtr.
455mm x 610mm x 410mm4 cu.Ft.112
505mm x 830mm x 415mm6 cu.Ft.170
570mm x 875mm x 550mm10 cu.Ft280
650mm x 900mm x 580mm12 cu.Ft336
700mm x 900mm x 650mm15 cu.Ft420
Ovens are designed fabricated & tested to suit various applications in growing field of Medical Agricultural, Research Laboratories of Hospitals. Suitable to work on 220/230V AC supply.
CONSTRUCTION:- Double walled construction with inside aluminium/Stainless Steel Chamber having 60-70mm glass wool insulation. Door is fitted with heavy chrome plated hinges & spring & roller type latch catch. Provided with adjustable steel / aluminium / wiremesh tray for better air circulation. Temp. is recorded by means of "L" shape thermometer fitted at the front of the cabinet.
TEMPERATURE RANGE : ambient to 250ºC ± 1º C . Temperature controlled by Hydraulic Type Capillary Thermostat.
HEATING : Heating elements are made from high grade (Kanthal ISI) Resistance wire. Heaters are fitted/wound along all sides & bottom. Complete with 2 pilot lamp cord & plug pin etc.
AVAILABLE SIZE Ltrs
12" x 12" x 12" (300x300x300mm) 28
14" x 14" x 14" (350x350x350mm) 43
18" x 18" x 18" (450x450x450mm) 90
18" x 18" x 24" (450x450x605mm) 105
24" x 24" x 24" (605x605x605mm) 120
24" x 24" x 36" (605x605x900mm) 215
24" x 18" x 36" (605x450x900mm) 240
