Introduction of rtv 2 molding silicone rubber:
1. Two-part of rtv 2 molding silicone rubber: flowable liquid silicon and catalyst.
2. Rtv 2 molding silicone rubber cures at room temperature within 4-6 hours.
Features of rtv 2 molding silicone rubber:
1. Rtv 2 molding siliconerubber has an exceptional fluidity and good operability.
2. Rtv 2 molding silicone rubber hasgood temperature and deformation resistance as well as low shrinkage.
3. Rtv 2 molding siliconerubber has high duplication times.
Operation step for rtv 2 molding silicone rubber:
1. Step one to use rtv 2molding silicone rubber: take 100g of part a and add 2g of part b and mix thesilicon rubber and the curing agent evenly.
2. Step two to use rtv 2molding silicone rubber: vacuum pumping
3. Without exception, thistakes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
4. Step three to use rtv 2molding silicone rubber: brushing cast & perfusion molding operation.
25kgs/drum vacuum package or 200kgs/drum
Silicone rubber for pad printing features description
Pad printing silicone rubber with highprint times and abrasion resistance, without any impurities, with good printingeffects, permanent and durable, we can provide all kinds of colors and ourcatalyst is free charged.
Applications:
The pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys, trade makers .Silicone pad printing is a carrier which transfer printing the patterns on the steel plate onto the toys products surface.
Silicone rubber for pad printing instructions
Pad printing silicone rubber istwo-component silicone, part a is the liquid silicone rubber, part b is thecatalyst. The usual mixing ratio for silicone rubber and catalyst is100 : 2-3, eg. We take 100grams of liquid silicone rubber, then weadd 2-3 grams catalyst, mix then evenly and pour it to your mold.Then after 2-4 hours, you will obtain a printing pad.
Features
1.Non-exothermic
2.Mold-releasability
3.Dimensional stability
4.Excellent flowability
5.Heat & chemical resistance
25kgs/drum vacuum package or 200kgs/drum
Shoe mold silicone rubber
A. Mainly used for shoe soles mold making
B. Two-component silicone rubber with tin-catalyst
C. Cured under room temperature
D. Low shrinkage
E. Excellent fexibility & easy demould
Shoe mold silicone rubber applications
Shoe mold silicone rubber is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.
Shoe mold silicone rubber features:
A.Two-component silicone rubber with tin-catalyst
B.Cured under room temperature
C.Low shrinkage
D.Excellent fexibility & easy demould
Shoe mold silicone rubber using instruction:
The component a of shoe mold silicone rubber is white flowing liquid and the component b is the curing agent. For example, take silicone rubber of 100g and add 2% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.
Notes:
Shoe mold silicone rubber is used for pouring or brushing technique. That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon , mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 2 and pour them onto the sole model, then brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried
25kgs/drum vacuum package or 200kgs/drum