Introduction：
The TP-serie are machines describing fully automatic vision SMT pick and place machines, which can mount a variety of components through the vacuum nozzle.
The TP66V is suitable for most of the SMD components such as 0402, SOICs, PLCCs and QFP ICs. With the vision position system it is able to mount 0.5mm of QFP ICs or BGAs. Beside the standard circle reference point, also a square point, which is not the PCB solder paste screen printing pad ring perforated pad, can be chosen as a reference point.
Features:
1. Using imported precision square rail, effectively improve the placement accuracy.
2. Using an unique high-definition optical prism industrial camera to complete mount high-precision components.
3. With the vision position system, it can automatically identify the MARK point to improve effectively your SMT production efficiency and placement accuracy.
4. Automatic visual programming. There is no need of a manual input the coordinates of components.
5. Standard configuration of automatic nozzle replacement system.
6. Able to configure a variety of different feeders to meet your needed requirements for mounting.
7. Easy to input CAD data of the PCB.
8. The software can display all PCB coordinates, which you can adjust by fine tuning some of the coordinates to assure a high precision placement.
Standard Configuration:
1. Industrial Computer: 1 piece
2. Mounting head: 1 groups
3. Nozzles: 9 pcs
4. GFTA-48 feeder table: 2 sets
5. MARK cameras: 2 sets
6. QFP high precision industrial camera: 1set
7. QFP high clear light source: 2 set
Optional:
1. Automatic feeder: 8mm, 12mm, 16mm and 24mm
2. IC Disc Feeder（GFQN）
3. Components bulk disk（GFSN）
4. Nozzles
5. AQ38 end mirror system（25MM-38MM QFP）
6. AQ45 end mirror system（38MM-45MM QFP）
7. Industrial air pump
Technical Parameter:
Mounting head: 2 units - 12 heads
Max size of PCB: 1500 x 316mm
Min width of PCB: 40mm
Max moving range: 670 x 620mm
Max thickness of components: 15mm
Typical speed: 14.000 - 17.000cph
Max speed: 32.000cph
X, Y-axis precision: 0.002mm
Mounting precision: +/- 0.03mm
Available components: > 0402 and < 38mm pitch; > 0.5mm IC
Positioning: Visual positioning
Program method: Automatic data import/ video learning/ keyboard input
Transmission: X, Y-axis high precision ball screw with precision guide rail
Tape feeder: Optional 8mm, 12mm, 16mm, 24mm, 32mm, 44mm
Number of Feeders: Possibility of 96 feeders of 8mm GFTA-08S feeder, 48 feeders for the front and 48 for the back side.
Number of IC feeder: Max 2 pcs
Operation system: Windows XP
Compressed air: 80psi (0.5Mpa - 0.7Mpa)
Power supply: 220V, 50Hz, 5kW
Weight: 14000kg
Dimension: 1650 x 1485 x 1400mm
The CNC3200A is the optimal solution to manufacture double sided circuits. The standard configuration includes an automatic replace tool system and a high-precision screw made in Germany. Equipped with a three axis controller and a high precision step motor to control the X, Y and Z-axis.
Features:
A. advanced: suit for double side PCB ,can engrave ,drill, cut the PCB.
B. effective: it takes only several minute to finish one PCB.
C. high precision: Standard configure Germany precision screw and three axis controller with high precision step motor; control the X Y Z axis precision to make sure the high precision.
D. convenient: software installation is easy and suit for variety PCB.
E. confidential: no need outsourcing processing ,lab can finish the whole process .
F. software is powerful, convenience and fast, have memories for processing, can continue to work when interrupt at any process.
G. With three face transparent sound insulation dust-proof covers, suitable for teaching demonstration and observation angles, and the front door with safety device to protect the safety of operators
H. standard configure tool cooling system, can prolong the lifetime of the tool, also can improve the precision.
I. Carving process can remove the excess of copper all laid or remove the copper on the line, remain the excess copper, saving time and improve the effective.
J. multi-function transfer software is suit for variety PCB design software.
K standard configure automatic replace tool system, can automatically replace 9 pcs tools, extend up to 18 pc tools (optional).
L. Configuration sound insulation dust cover, and safety device, can make sure the safety of operator when working.
Technology parameters:
1. Min line diameter: 4mil
2. Min line width: 0.15mm
3. Minimum insulation spacing: 0.15mm
4. Repeated precision: 0.02mm
5. Min hole diameter: 0.15mm
6. Transmission resolution: 0.001mm
7. Work table: 310*410*130mm, work size: 500*375mm
8. Spindle speed: 10000-60000RPM Infinitely adjustable, spindle power: 200W to 250W.
9. Three axis speed: 100*100*100mm
10. Automatically replace tools: 9 pcs tools, 3mm - 3.175mm, can add up to 36pcs tools.
11. Drilling speed: Max 100pc/min
12. Transmission way: standard configure Germany precision screw and three axis controller with high precision step motor, Pneumatic tools chuck, fabrics hood.
13. Flatness compensation: The flatness of PCB make assures high-precision results.
14. Lighting device: With lighting device, convenient to view the engraving process.
15. Dust collection device: professional dust collection device to assure that the inner body is clean, which is makes the engraving process viewable. Optional: Use of vacuum worktable.
16. Software: Includes a professional automatic tool, multi-axial engraving software, easy to input NCP, PLT, DIN 66025 format.
17. Protective cover: can view at 360 angel, also with safety switch to make sure the operator’ safety.
18. Operating system: Win98/ 2000/ XP
19. Min memory: 512MB
20. Handheld magnifying glass: Magnification of 40 times with mm scale and lighting.
21. Special air pump: 30L air cans, max air pressure is 8 bar, air flow is 100 L/min.
22. Dimension: 700*700*700mm
23. Speed of no load: 100mm/s
24. Trough mill speed: 6mm/s
Introduction:
The LED660V is a professional LED pick and place machine, features high-speed and high-accuracy. It is your optimal solution for LED circuit board high-volume assembly.
Features:
1. Board driving system uses high precision step motor, which is driven by an industrial belt. It cooperates with a precision guide-rail to improve the placement accuracy and board driving speed.
2. Integrated 6 mounting heads driving system with servo motor. Together with the high precision ball screw, it achieves the complete pick and place process of the LED components.
3. The 6 groups of mount heads improves the production efficiency of 400%, compared with 1 group of heads.
4. Automatic visual programming. No need of manual input of the component coordinates. Programming is simple and fast, a new program is finished within 10 min.
5. Different sizes of smart feeders, which will not move if the component stuck or isn’t picked up properly.
6. The LED660V is a cost-effective mounter which suits optimal a high-volume LED production.
7. The whole machine is controlled by an industrial computer with professional software, easy to operate and use.
8. Easy to import CAD data of the circuit boards.
9. Stable and easy to complete the programming and placement of LED panel board.
10. The coordinates of the PCB can be displayed, opportunity of a fine adjustment for these coordinates to achieve high-precision placement.
11. The space of panel board can be set in the software, all component placing coordinates will be shown according to the space of panel board. Selection of PCBs, which shall not be mount is possible as well.
12. If the board have manufacturing quality problems, the LED660 can shift the component place for accurate mounting.
13. The software includes a 6 grades speed changing function, you can find your adequate speed according to the distance check sheet. Besides, the speed adjustment can increase the stability for long time usage.
14. The PCB platform has a vacuum absorb function, which can help large-size PCBs and FPCs to position accurately and improve the placement accuracy.
15. Integrated vacuum pump inside the machine, no need to configure it separately.
16. The LED660V is a special LED mounter, which can mount all kinds of SMD LED chips, all components above 0402 (except more than 5mm Aluminum electrolytic capacitors ), cylindrical diodes, transistors, SOPs, and SOTs smaller than 20mm IC.
Technical Parameter:
Mounting heads: 6pcs
Max size of PCB: 1200 x 350mm
Max moving range: X-axis: 1500mm, Y-axis: 410mm
Max moving range of Z-axis: 15mm
Typical mounting speed: 13.000 - 14.000cph
Max mounting speed: 18.000cph
Mounting accuracy: +/- 0.1mm
Positioning method: Visual positioning
Component available: SMD components >0603 and LEDs, SOTs, SOPs
Program method: Automatic data import/ video study/ keyboard input
Belt feeder: Optional: 8mm, 12mm, 16mm, 24mm
Number of feeders: 6pcs of GF feeder can be set, optional 12 feeders possible.
Operation system: Windows XP
Air pressure: Internal vacuum
Power supply: 220V,50Hz, 4.5kW
Weight: 500kg
Dimension: 2600 x 680 x 1500mm
Product Description:
The automatic pick and place machine TP400V-II is a cost-effective equipment in the SMT industry. It is able to fabricate a variety of components by the integrated vacuum nozzle. The machine can mount SMD chip components above 0402, SOICs, PLCCs, QFP and ICs. The Vision System is compatable with QFP ICs with a pitch of 0.5mm. Beside the round reference, also square square formed and ring hole pads can be recognized as mark point.
Features:
1. Automatic Mount by control of software.
2. Quick PROTEL data import or manual input.
3. Visual + machinery positioning.
4. Visual programming system can identify the reference point automatically to improve the production efficiency and accuracy.
5. The visual programming system can produce X, Y coordinates of all components automatically after confirmed the basic reference points and to complete the mounting process.
6. Unique optical prism and high-definition industrial cameras for placing high-precision components.
7. Equipped with a high-precision quadrate guide rail and smooth gliding arm for improving mounting accuracy.
8. Air suspended head for pick- and place-process.
9. Automatic nozzle replacement system.
Optional:
1. Automatic feeder
2. IC disc
3. Automatic PCB transmission system
Main parts:
1. DC servo motor driving system:
It uses loop DC servo motor driving system for a high precision repeating accuracy and stability.
2. Vision centering system: Vision centering system can mount 0.5mm pitch QFP ICs.
3. No-contact flying centering system: Flying centering system can mount most of SMD components including: 0402, SOICs，PLCCs & QFP ICs.
4. Flexible reference point system (RPS): In addition to the standard round reference point, also a square formed and ring formed PCB pad with a whole can be identified as a reference point.
5. All-purpose automatic feeder: The TP400V-II has 8mm, 12mm, 16mm, 24mm feeders which you can choose to install.
6. Flexible tray-type station: The TP400V can equip 2 trays which helps to mount bulk components under the semi-auto mode.
7. CAD/ Protel data transfer: Besides studying the component coordinate by Camera or keyboard input, you can choose the CAD transfer software WCAD to transfer the PCB’s CAD into pick and place data.
8. Buffering nozzle: Buffering nozzle can adjust the pressure automatically according to different components height to avoid damage due to different component heights or programming errors. It is suitable for various types of pick and place ceramic components and ceramic circuit boards.
Technical Parameter:
Type: TP400V-II (V: industrial camera at bottom)
Max printing size: 400×350mm
Max moving range: 400×630mm
Z axis max moving range: 70mm
Typical mounting speed: 2000-2800cph
Max mounting speed: 3500cph
Mounting accuracy: ±0.05mm
Component available: SMD components > 0402 and SOICs、PLCCs、QFP ICs < 38mm
Positioning method: Visual positioning
Programming method: Video study/ keyboards input/ data import
Driving way: Y-axis uses industrial synchronous belt drive, X-axis uses imported high precision lead screw.
Automatic Feeder: 8mm, 12mm, 16mm, 24mm feeder
Feeder Number: 1. Place 72 pieces of 8MM feeder CFTA-08S, 36 pieces at the front and back side.
2. Place 60 pieces of 8MM feeder GFTA-08S, 30 pieces at the front and back side.
PCB board input system: Automatic (Standard configuration)
Automatic Nozzle changing system: Automatic (Standard configuration)
IC tray number: 2
Operation system: WINDOWS XP
Compressed air: 80psi (0.5Mpa)
Power supply: 220V, 50Hz, 3kw
Weight: 310kg
Dimension: 1280×1410×750mm
Introduction:
The automatic pick and place machine TP210+ is a desk type high speed pick n place machine. It is a cost-effective SMD mounter.
The TP210+ can mount 0603, 0805, 1206 and many more. It can fabricate SOPs and SOICs (size under 15*15mm, PIN foot less than 24) as well.
TP210+ equips 22 pcs of 8 feeders (electric feeder of 8mm, 12mm, 16mm,24mm can be chosen). The Z-axis can route freely and can meet requirements of various angle component.
Main parts:
1. Step motor with a function to change the angle: able to mount 45°, 90°,180° angle component.
2. Dual Parallel square-type wide guide rail. Compared with a balling guide rail, the guide rail has a small space to ensure a high accuracy.
3. Visual + machinery position system: The camera nearby mounting head can magnifying through a '+' cursor to ensure an accurate mark point position.
4. No-contact flying centering system: Flying centering system can mount a variety of SMD components including: 0603, 0805,1206, many more and SOPs, SOICs with a size under 15*15mm, PIN foot less than 24.
5. Flexible reference point system (RPS): In addition to the standard round reference point, also a square formed and ring formed point with a hole also can be identified as a reference point.
6. All-purpose automatic feeder: 22 pcs of automatic feeder can be chosen. 8mm, 12mm, 16mm, 24mm can be installed according to your component and required speed.
7. It is using a unique air suspended pick and place head design, which can transmit several kinds of large and small component.
8. Protel file of component data import: Software control, limitless data file can be saved in PC, you can call them at any time when needed, easy to operate.
Technical Parameter:
Type: TP210+
Max PCB size: 300x200mm
Max moving range: 400×460mm
Max moving range of Z-axis: 10mm
Typical pick&place speed: 2.600-3.000cph
Max pick & place accuracy: ± 0.014mm
Repeat accuracy: ±0.05mm
Positioning: Visual and machinery positioning
Component Available: 0603, 0805, 1206 etc and SOPs, SOICs (size under 15x15mm, PIN foot less than 24)
Programing method: Software program input
Driving mode: uses industrial synchronous belt
Automatic Feeder: 8mm,12mm,16mm,24mm feeder can be chosen.
Number of feeders: 22 pcs of 8mm feeders
Number of IC Plate: More than 2
Operating system: WINDOWS XP
Air pressure: 80psi(0.5Mpa)
Power supply: 220V,50Hz
Weight: 95kg
Dimension: 980×1000×590mm
