Cut-in composite step beam on which steel or wooden panels are assembled; the height of each layer is easily to be adjusted by 50mm, the capacity of each level is up to 800kg; the racking can be customized based on clients requirements, compared with the medium-duty shelving, it is more suitable for storing metal components and widely used in the manufacturing industry.
1. Upright: 50*58*1.5/2.0mm, 50mm pitch.
2. Step beam: 50*30*1.5p, 60*40*1.5p, 80*50*1.5p.
3. Steel shelf: 0.7 or 0.8mm, designed by loading capacity request.
Plastic film as inner package.
Upright shaft is usually made of H type steel or cold rolling steel or frame, square tube, cold rolling steel or H type steel are used to make arms. Cantilevers are assembled to upright shafts by composite type or bolts & nuts which is also for the fixation between base and uprights. Level height is adjustable. Loading and unloading of goods can be done manually or by forklifts.
The height of cantilever racking is usually lower than 2500mm (the height up to 6000mmby using forklifts for loading); length of arm is shorter than 1200mm, and loading capacity is no more than 1200kg per arm. Cantilever racking is mainly used in the Mechanical Manufacturing Industry and markets for building materials. There are three kinds of cantilever racking, light duty, medium duty and heavy duty, each kind of cantilever racking has different loading ability, as well as different material.
plastic film as inner package
1. Steel platforms are mainly consisted by uprights, main beams, accessorial beams, steel floors, stairs and protection rails. Assembling in the whole structure, no need to welding in the sites.
2. The uprights are made of square tubes, round tubes and hot rolling H-type steel, the main and accessorial beams are made of hot rolling steel and cold-bending C-type steel, the material of floors are usually cold rolling steel, the structure is lock-up, between floors and main/accessorial beams, there are special designed locks. Compared with traditional checkered steel plates and steel gratings, the lock-up steel plates have many advantages, such as loading stronger, good integrity, good capacity equality, high accuracy, flat surface, lock easily, etc. also it is easy to assemble lighting system.
3. Forklift or lift platform deliver goods to the second or third floor, then trolleys or hydraulic platform carts deliver the goods to the pointed places. Compared to reinforced concrete, steel platforms have such features, building quicker, acceptable cost, easily assemble and disassemble, and can be moved to use, also, the appearance is more beautiful. The distance between two uprights is 4~6 meters, the height of the first floor is around 3 meters, for the second and third floor, the height is around 2.5 meters. The loading capacity of the floors is usually 300~1000kg per square meters.
4. This kind of steel platforms can make storage and management combine closely, upstairs or downstairs can be used as warehouse office. This kind of storage system are usually used to the third logistics, machinery manufacturing and other industries.
Plastic film as inner package.
1. If the area of factory is limited, by using steel beams and metal plates, partition the space to be several levels, usually 2~3 levels.
2. The floors are usually made of cold rolling steel, the structure is lock-up, between floors and main/accessorial beams, there are special designed locks. Compared with traditional checkered steel plates and steel gratings, the lock-up steel plates have many advantages, such as loading stronger, good integrity, good capacity equality, high accuracy, flat surface, lock easily, etc. also it is easy to assemble lighting system, store and manage goods. The plates of floor have common flat type, figure type, checkered type, and so on. The loading capacity of the floors is usually 300~1000kg per square meters. The distance between two floors is 2.2~3 meters, the height of the top level racks is around 2 meters, considering fully about the use convenience of people and machines.
3. Mezzanine racks are usually designed with stairs, hydraulic lift platforms or elevators, or by using forklifts to load or unload the goods in the up floors via doors. According to customer¡¯s request, the mezzanine racks can be designed a unload slide board, in order to unload goods quickly from up floors to the ground.
4. Easily assembling and disassembling, according to sites and requirements, the mezzanine racks can be designed to be 2 or 3 floors, in order to use space fully, this kind of racks are commonly used in autos, electronics, light industry, machinery industry, etc.
Loft-type racking.
Cut-in composite structure, standard cut-in units; assembling and disassembling are simple and quick without using bolts and nuts; high strength closed steel panel with welded support bars; the height of the each layer can be freely adjusted by 50cm; loading capacity of each layer can be up to 400kg; the square model upright, widely used in many fields.
Material:
1. upright:55*55*1.5mm, 50mm pitch.
2. beam and hangers: 2.0mm steel.
3. steel shelf: 0.7mm, 0.8mm, 1.0mm, designed by loading capacity request.
Plastic film as inner package
