ROPS/R1 Tires
45 Gross HP 4 Cylinder Diesel Engine
39 PTO HP
F8/R8 Gear Drive Transmission
Dash Mounted Shuttle Shift Forward to Reverse
High Strength Cast Iron Axle Construction
Independent 540 RPM PTO
3-Point Category I Hitch, Flexible Link Ends, Telescoping Stabilizers
16.9 GPM Pump Capacity (Total)
1830 Lb. Rear Lift Capacity
Single Rear Remote
Dimensions: 134"L x 66"W x 93.9"H. Weight: 3836 Lbs.
Model: 8N Boomer
Fuel: Diesel
Drive: MFWD
Engine HP: 50.
Original box Ford New Holland 8N boomer with loader - MFWD.
Traction and Drive
System Voltage : 48V nominal
Traction Drive : AC; 3 hp (2.2 kW) continuous
Reel Drive : One brushless DC motor per reel; 1.3 hp (0.97 kW) continuous
Reel Lift : One linear actuator per reel with individual control
Tires, Brakes and Steering
Tires : 18 x 10.5 x 8, 4-ply
Parking Brake : Automatic electro-magnetic multi-plate
Steering : Variable ratio by-wire steering with feedback control
Reels and Blades
Number and Size : Three 22 in. (0.56 m) reels; 5 in. (127 mm) diameter
Number of Blades : 7, 9, 11
Cutting Frequency : 0.05 - 0.25 in. (1.2 - 6.3 mm) with 11 blade reel; Electronically adjustable
Overall Cutting Width : 62 in. (1.6 m)
Height of Cut Range (Depending on turf condition and bedknife installed) : 0.062 - 0.438 in. (1.6 - 11.1 mm)
Backlapping : Standard on-board backlapping
Speed
Mowing : 0 - 5.0 mph (0 - 8.9 kph); Electronically adjustable max speed
Transport : 0 - 9.0 mph (0 - 14.5 kph); Electronically adjustable max speed
Reverse: 0 - 4.0 mph (0 - 6.4 kph)
Weight and Dimensions:
Weight with Reels Up : 1615 lbs. (756 kg) with all fluids
Weight with Reels Down : 1342 lbs. (624 kg) with all fluids
Length with Catchers On : 101 in. (2.57 m)
Height with ROPS : 79.3 in. (2.01 m)
Wheel Base : 52 in. (1.32 m)
Width : 58.75 in. (1.5 m) outside of tires
Overall Width : 67.7 in. (1.72 m) with reels
Ground Clearance (at reels) : Front: 6.125 in. (15.5 cm) Rear: 4.25 in. (10.8 cm)
Turning Circle : Inside: 20.25 in. (0.51 m) Outside: 144.25 in. (3.7 m)
Approximate Run Time Per Charge : 3 - 3.5 hrs.
Original box.
Yanmar TNM 26HP Diesel Engine:
Interim Tier 4 (IT4)-compliant isolated Yanmar Diesel Engine
High-torque reserve provides plenty of power under heavy load, yet retains excellent fuel economy
Full-pressure lubrication system provides filtered oil under pressure to all vital engine parts
Single-piece side panels and front grille screen provide excellent air flow and can be removed for easy and quick access to the engine
Horizontal exhaust discharges fumes away from the operator station, reducing noice and improving operator visibility and comfort
Easy Operation 4-Wheel Drive and Power Steering:
Both 4-wheel drive (4WD) and power steering are standard on the John Deere 1026R, allowing for excellent maneuverability and easy of operation of the tractor
Narrow overall width allows the John Deere1026R to work in tight areas where most compact tractors cannot fit
Power steering means fewer turns of the steering wheel compared to manual steering, which becomes a valuable feature when used with a front loader or other attachments
High horsepower-to-weight ratio allows for easy completion of a variety of tasks, while the overall reduced weight makes for an excellent mowing tractor
Hydrostatic Transmission with Twin Touch foot controls:
Fluid under pressure transmits engine power to the drive wheels through a hydraulic pump and motor
The hydrostatic drive unit functions both as a clutch and transmission
Twin Touch foot controls allow selecting both speed and direction of travel with the touch of a foot, ideal for jobs where productivity is a must
Infinite ground speeds, even at full throttle, to match the job
Large foot pedals were designed for operator comfort and allow for convenient operation of the tractor.
