Designed according to DIN3352-F4 and F5
Size range: 1.5 to 24 inches
Nominal pressures: PN10 and PN16
Face to face dimensions: DIN3352-F4 and F5
Flange drilled is according to DIN2501
Body/bonnet: cast iron/ductile iron
Wedge: ductile iron lined with EPDM/NBR rubber
Stem: stainless steel/brass
Bolt and nut: stainless/carbon steels with zinc plating
Other options:
ANSI/AWWA C509 or BS 5163
No ring or rising stem
Resilient or metal seated
Designed to comply with API 594 Adopting dual plate design for efficient sealing Valve inspection and testing comply with API 598 Available in series F16 and series F125 Series F16 check valve compatible with DIN, BS flanges Face to face according to ISO 5752 basic series 16 (wafer long) F125 check valve compatible with ANSI 125/150 flanges Available in size 2 to 24 inches Available in wafer type body Materials list: Body materials: cast iron, ductile iron Disc: ductile iron (with nickel plating or nylon coated), SS 304, 304L, 316, 316L, aluminum-bronze Seat: NBR, EPDM, neoprene, PTFE, Viton Shaft: SS304, SS316, SS410 Spring: SS304, SS316, SS410 Seal washer: NBR, EPDM, neoprene, Viton
Double Shaft without Pin stem butterfly valves are popular and meet many markets
Design to comply with MSS SP-67, BS5155 and API 609
Compatible with ANSI, DIN, JIS flanges
Size range: handles (1 1/2 to 12 inches), manual gear operators (1 1/2 to 48 inches)
Pressure: from PN0.6MPa to PN1.6MPa
Medium: acids, alkalis and salts
Materials list:
Body materials: cast iron, ductile iron and stainless steel
Disc: Ductile Iron (with PTFE Coated)
Seat: PTFE
Shaft: SS410, SS416
Pin: SS316
O ring: NBR, EPDM, neoprene and viton
Bushing: PTFE, nylon and lubricated bronze
Wafer Type Butterfly Valve, One-piece Shaft with Pin stem
Design to comply with MSS SP-67, BS5155 and API 609
Compatible with ANSI, DIN, JIS flanges
Size range: Handles (1 1/2 to 12 inches), manual gear operators (1 1/2 to 48 inches)
Pressure: From PN0.6MPa to PN1.6MPa
Medium: Acids, alkalis and salts
Materials list:
Body materials: Cast iron, ductile iron and stainless steel
Disc: Ductile iron (with nickel-plated or nylon-coated), SS 304, 304L, 316, 316L
Seat: PTFE
Shaft: SS410, SS416
Pin: SS316
O ring: NBR, EPDM, neoprene and viton
Bushing: PTFE, nylon and lubricated bronze
Product name: Lug Type Butterfly Valve (Series F101)
Structure Feature: Centerline Design, With Pin
Design: MSS SP-67, BS5155 and API 609
Connection Standard: ANSI, DIN, BS, JIS
Working Pressure: PN0.6MPa to PN1.6MPa
Size Range: 1-1/2inch to 48inch
Operator: Lever, Worm Gear, Pneumatic, Electric Actuator
Materials list:
Body materials: Cast iron, ductile iron and stainless steel
Disc: Ductile iron (with nickel-plated or nylon-coated), SS 304, 304L, 316, 316L
Seat: PTFE
Shaft: SS410, SS416
Pin: SS316
O ring: NBR, EPDM, neoprene and viton
Bushing: PTFE, nylon and lubricated bronze
Cast Carbon Steel / Stainless Steel Valves
Types: Gate Valve, Global Valve, Swing Check Valve, Ball Valve, Y-Strainer
Rating: class 150, class 300, class 600, class 900, class 1,500, and class 2,500lps
Materials:
1/2 to 2 inches: A105, LF2, F5, F11, F22, F304, F316, F304, and F316L
2 to 36 inches: WCB, LCB, WC6, WC9, C5, C12, CF3, CF8, CF3, and CF8M
Design: API 600, API 603, API 6D, and ANSI B16.34
End flange: 2 to 24 inches to ANSI B16.5, 26 to 36 inches to MSS SP-44
Weld ends: ANSI B16.25
Face-to-face: ANSI B16.10
Shell and seat test: API 598
Malleable Iron Pipe FIttings
Types: Elbow 45, Elbow 90, Elbow 180, Street Elbow, Cross, Tee, Cap, Bushing, Union, Nipples, Coupling, Plug, Hex. Bushing, Hex. Nipple, Square Plug and etc.
American standard:
Materials: ANSI/ASME A197-79
Dimensions: ANSI/ASME B16.3-85
Threads: ANSI/ASME B1.20.1
DIN Standard:
Materials:DIN1692
Dimensions:EN 10242 DIN2950
Threads:ISO 7/1 DIN2999
British Standard:
Materials: ISO 5922 BS 143 and BS1256
Dimensions: ISO 49, Threads: ISO 7/1
Types: Single Sphere, double-sphere; Flange Type, Union Type
Flange drilling: ANSI class 125/150, DIN PN 10/PN16, JIS 5K/10K
Working pressure: 1.6mPa (16 kgf/cm2)
Working degree: -15 to +115 degrees Celsius
Working medium: Vapour, compressed air, cold & hot water, seawater, oil, weak acid, alkali
Material list:
Body: Neoprene, EPDM, NBR
Lining: Chinlon Cord Fabrics
Frame: Hard Steel Wires
Flange: Carbon Steel.
Materials: ASTM A105, RST37.2, C22.8, ASTM A181, ASTM A182, and ASTM A350
Standards: ANSI/ASME B16.5 and ANSI/ASME B16.47, DIN2527, DIN2573, 2576, 2502, 2527, 2673, 2674, 2675, 2676, 2641, 2642, 2655, 2656, 2627, 2628, 2629, 2630, 2632, 2633, 2634,2635, 2636, 2637, 2638, 2565, 2566, 2567, DIN86029, 86030, BS10, BS4504, UNI, JIS2220, EN1092.
Working Pressure: Class: 75, 150, 300, 600, 900, 1,500, and 2,,500lbs; PN6, PN10, PN16, PN25, PN40, PN64, PN100; 5K,10K, 16K, 20K, 30K
Types: slip-on, welding neck, blind, threaded, lap joint, and socket weld
Size: NPS 1/2 to 60 inches Facing: RF, FF, and RTJ
Painting: black paint, varnish paint, and golden paint
Manufacture Process: Forging or Casting
SEAMLESS CARBON STEEL / STAINLESS STEEL BUTT-WELDING PIPE FITTINGS
Types: Elbow 45, Elbow 90, Elbow 180, Equal Tee, Reducing Tee, Concentric Reducer, Eccentric Reducer, Cap and etc.
Spec. standards: ANSI B16.9, ANSI B16.28; JIS B2311; DIN 2605, 2615,
2616, 2617
Material standards: ASTM A 234 WPB, JIS G3452, DIN 1629, SS304, SS316
Nominal pipe size: 1/2INCH to 48INCH(DN15 to DN1200)
Wall Thickness: SCH20, STD, SCH40, XS, SCH80, XXS, SCH160, SGP
Design and manufacture: ASME/ANSI B16.11, B 1.20.1, MSS SP-79, 83, and JIS B 2316
Types: union, 45 and 90 degree elbow, tee, cap, coupling, nipple, bushing, plug and half-thread short pipe
Ends: socket weld and threaded NPT
Nominal diameter: NPS 1/8 to 4 inches (DN6 to DN100)
Working pressure:
Threaded: 2,000, 3,000, and 6,000lbs
Socket weld: 3,000, 6,000, and 9,000lbs
Materials: ASTM A 105, ASTM A 182 F304, F304L, F316, and F316L
Stainless steel fittings
Including elbow 90 / 45, street elbow, tee, reducing tee, cross, union, union m/f, hexagon nipple, reducing hexagon nipple, hexafon bushing, square plug, hexagon plug, cap, hexagon cap, socket banded, reducing socket banded, socket plain, socket o. D. Machined, barrel nipple, hose nipple
Size: 1/8" - 4"
Material: SS304 / SS316
Pressure: 150PSI
Threaded: DIN 2999/ 259, BSPP, BSPT, NPT, NPS.
eamless / Welded Carbon Steel Pipe Fittings
Types: 45 and 90 LR/SR elbows, 180 returns, straight, reducing tees, caps, concentric and eccentric reducers
Specification standards: ANSI B16.9, ANSI B16.28, JIS B2311, DIN 2605, 2615, 2616, and 2617
Material standards: ASTM A 234 WPB, JIS G3452, and DIN 1629
Nominal pipe size: 1/2 to 48-inch (DN15 to DN1200)
Wall thickness: SCH20, STD, SCH40, XS, SCH80, XXS (for ANSI), and SGP (for JIS)
Painting: varnish and black
Forged Steel Valves
Range: gate valves, globe valves, check valve, Y-type globe valves, and Y-type check valves
Type: flange ends, inner screwed ends, and socket welding
Class: 150 to 600lbs, 900 to 1,500lbs, and 2,500lbs
Design: ASME/ANSI B16.34, API 600, and API 602
Ends connection: Flange dimension: ASME/ANSI B16.5 (RF)
SW dimension: ANSI B16.11
Screwed dimension: ANSI B16.20
BW dimension: ANSI B16.25
Structural feature: Bolt bonnet (BB), outside screwed, and yoke (OS and Y) Welded bonnet (WB), outside screwed, and yoke (OS and Y) Pressure-in bonnet (PS), outside screwed, and yoke (OS and Y)
Body material: A105, F304, F304L, F316, and F316L
Inspection and test: API 598, API6D, CE, and ISO9001
TYPE: 1PC, 2PC, 3PC
ENDS: NPT / BSPT / DIN2999 THREADED, FLANGED, BUTT-WELDED, SOCKET WELDED
REDUCED / FULL BORE
SIZE: 1/4 INCH - 4INCH
WORKING PRESSURE: 1000 PSI, PN16, PN40
OPTIONAL LOCKED DEVICE HANDLE
MATERIAL:
BODY / BALL: SS304, SS304L, SS316, SS316L
SEAT: PTEFE
STEM / NUT: STAINLESS STEEL
