Wastewater evaporators:
Wastewater Evaporator Systems dramatically reduce disposal waste, turning wastewater to clean water vapor. Evaporation technology offers the most effective approach to industrial wastewater minimization.
evaporators,wastewater, evaporator, evaporators, wastewater evaporator, wastewater evaporators, waste water evaporators, wastewater evaporation, waste water evaporation, wastewater minimization, commercial, industrial wastewater, industrial wastewater treatment, industrial, wastewater recovery, wastewater treatment, waste stream, wastewater problem, evaporation technology, recycle wastewater, drum evaporator, thermal evaporator, mvr evaporator.
Many companies that generate industrial wastewater are hauling their water for disposal at a high cost per gallon. Other companies are treating the wastewater, often with labor and chemical intensive processes, and are having to adhere to increasingly strict discharge limits to their local sewer authority.
Shanhai Dingtai offer an alternative to hauling and treating by safely evaporating wastewater to atmosphere at a dramatically lower cost. Dingtai Evaporators recover and recycle wastewater as distilled water for reuse or discharge to the sewer.
1.All Dingtai evaporating systems are designed to operate off shift and unattended to minimize manpower requirements and cost. Dingtai sales engineers will work with you to qualify applications based on lab and pilot scale testing. The Dingtai approach is consultative with special focus on providing solutions with financial justification and regulatory compliance.
2.Please navigate our web site to learn more about Dingtai Wastewater Evaporator systems and solutions or contact
3.Dingtai Evaporators are an excellent low cost solution for your low volume wastewater dewatering.
4.Dingtai Evaporators and wastewater recovery technology have been supplied to our commercial and industrial clients for the past 17 years with hundreds installed throughout North America, South America, Europe, the Middle East and Asia.
Wooden case.
Salt Evaporator:
Salt Evaporator can be used for low temperature continuous evaporation and concentration,and its feature is high heat transmission coeffcient and short heating time of material.It is especially suitable for materails with thermal sensitivity,viscosity,or foamability.This type of evaporator is widely applied to the industries of salt manufacturing,milk,glucose,starch,xylose,pharmacy,chemical,biological engineering,environmental engineering,waste liquid recycling and so on.
Composition:
The Sodium evaporator is composed of the heating evaporators for each effect,segregator for each effect,condensor,heat pressure pump,vaccum system,feed liquid conveying pump for effect,condensed water outlet pump,operating platform,control cabinet of electrical appliances,pipleline and so on.
Features of sodium evaporator:
1.Due to the even heating of steam and flow evaporation of feed liquid film type,the whole heating system features high heat transmission efficiency and short heating time. Equipped with a heat pressure pump,our evaporator is energy-saving and features low steam consumption and low cooled water circulation volume.
2.The material is evaporated flowingly under increased pressure and speed, along the pipe wall from upper to down. Therefore the evaporator is suitable for materails with high viscosity.
3.Since ther material is of film evaporation in each pipe,the heating time of feed liquid is very short.Hence,our sodium chloride evaporator is perfectly suitable for the evaporation and concentraion of food,and could greatly keep the nutrients in food.
4.The evaporation is performed under the vacuum condtion,which not only meets the requirements of hygiene and environment protection,but also greatly lowers the evaporating temperature. The heat pressure pump used in our evaporator takes partial secondary steam into device again and make it mix with live steam, which greatly reduces steam consumption.The steam in the heat pressure pump sprays out like the mist and enters into the heating casing,and then spreads quickly and heats the feed liquid mildly.So our sodium chloride evaporator can be used to evaporate thermal sensitive materials.
5.This evaporation equipment is also suitable for materials with foamabilty.The feed liquid is of film evaporation in the heating tube,which forms steam-liquid separation.In addition,most feed liquid is pumped out, and only at a small amout of feed liquid and all secondary steam enter into the segregator for forced separation.There is no big impact in the whole process,which avoid the forming foam.
Wooden case.
Industrial Evaporator
industrial Evaporator can be used for low temperature continuous evaporation and concentration,and its feature is high heat transmission coeffcient and short heating time of material.It is especially suitable for materails with thermal sensitivity,viscosity,or foamability.This type of evaporator is widely applied to the industries of salt manufacturing,milk,glucose,starch,xylose,pharmacy,chemical,biological engineering,environmental engineering,waste liquid recycling and so on.
Composition:
The Sodium evaporator is composed of the heating evaporators for each effect,segregator for each effect,condensor,heat pressure pump,vaccum system,feed liquid conveying pump for effect,condensed water outlet pump,operating platform,control cabinet of electrical appliances,pipleline and so on.
Features of sodium evaporator:
1.Due to the even heating of steam and flow evaporation of feed liquid film type,the whole heating system features high heat transmission efficiency and short heating time. Equipped with a heat pressure pump,our evaporator is energy-saving and features low steam consumption and low cooled water circulation volume.
2.The material is evaporated flowingly under increased pressure and speed, along the pipe wall from upper to down. Therefore the evaporator is suitable for materails with high viscosity.
3.Since ther material is of film evaporation in each pipe,the heating time of feed liquid is very short.Hence,our sodium chloride evaporator is perfectly suitable for the evaporation and concentraion of food,and could greatly keep the nutrients in food.
4.The evaporation is performed under the vacuum condtion,which not only meets the requirements of hygiene and environment protection,but also greatly lowers the evaporating temperature. The heat pressure pump used in our evaporator takes partial secondary steam into device again and make it mix with live steam, which greatly reduces steam consumption.The steam in the heat pressure pump sprays out like the mist and enters into the heating casing,and then spreads quickly and heats the feed liquid mildly.So our sodium chloride evaporator can be used to evaporate thermal sensitive materials.
5.This evaporation equipment is also suitable for materials with foamabilty.The feed liquid is of film evaporation in the heating tube,which forms steam-liquid separation.In addition,most feed liquid is pumped out, and only at a small amout of feed liquid and all secondary steam enter into the segregator for forced separation.There is no big impact in the whole process,which avoid the forming foam.
Wooden case.
Brine Evaporator:
Bine evaporator can be used for low temperature continuous evaporation and concentration,and its feature is high heat transmission coeffcient and short heating time of material.It is especially suitable for materails with thermal sensitivity,viscosity,or foamability.This type of evaporator is widely applied to the industries of salt manufacturing,milk,glucose,starch,xylose,pharmacy,chemical,biological engineering,environmental engineering,waste liquid recycling and so on.
Composition:
The Sodium evaporator is composed of the heating evaporators for each effect,segregator for each effect,condensor,heat pressure pump,vaccum system,feed liquid conveying pump for effect,condensed water outlet pump,operating platform,control cabinet of electrical appliances,pipleline and so on.
Features of sodium evaporator:
1.Due to the even heating of steam and flow evaporation of feed liquid film type,the whole heating system features high heat transmission efficiency and short heating time. Equipped with a heat pressure pump,our evaporator is energy-saving and features low steam consumption and low cooled water circulation volume.
2.The material is evaporated flowingly under increased pressure and speed, along the pipe wall from upper to down. Therefore the evaporator is suitable for materails with high viscosity.
3.Since ther material is of film evaporation in each pipe,the heating time of feed liquid is very short.Hence,our sodium chloride evaporator is perfectly suitable for the evaporation and concentraion of food,and could greatly keep the nutrients in food.
4.The evaporation is performed under the vacuum condtion,which not only meets the requirements of hygiene and environment protection,but also greatly lowers the evaporating temperature. The heat pressure pump used in our evaporator takes partial secondary steam into device again and make it mix with live steam, which greatly reduces steam consumption.The steam in the heat pressure pump sprays out like the mist and enters into the heating casing,and then spreads quickly and heats the feed liquid mildly.So our sodium chloride evaporator can be used to evaporate thermal sensitive materials.
5.This evaporation equipment is also suitable for materials with foamabilty.The feed liquid is of film evaporation in the heating tube,which forms steam-liquid separation.In addition,most feed liquid is pumped out, and only at a small amout of feed liquid and all secondary steam enter into the segregator for forced separation.There is no big impact in the whole process,which avoid the forming foam.
Wooden case.
Double-effect Falling Film Evaportor
Moisture evaporation amount (L/h):
1200 1500 2400 3000
4000 5000
Scope of application:
Single effect or multi-effect falling film evaporators are widely applied in foodstuff industry, chemical industry, pharmaceutical industry, biological engineering, environmental engineering, liquid waste treatment etc. They can be applied to the low-temperature continuous evaporation and concentration of such materials as milk, glucose, starch, wood sugar and so on, with the main characteristics of high heat transfer efficiency, short time of materials being heated, which makes them suitable for evaporating materials with hot sensitivity, viscosity, foaminess, etc.
Parts of the whole system:
evaporators of various stages, separators of various stages, condenser, hot pressure pump, sterilizer, heat preservation tubes, vacuum and drainage system, materials¡¯ transfer pumps of various stages, condensate water pump, branch cylinder, operation platform, electric meter control cabinet, valves, pipes, etc.
Main features:
1. The whole heating system of a falling film evaporator is heated evenly by steam and feed liquid is evaporated in the shape of flowing liquid film. So the falling film evaporator has the main characteristics of high heat transfer efficiency and short time of feed liquid being heated, etc. If ever equipped with spray type hot pressure pump, the falling film evaporator will has further virtues of energy saving, low consumption of steam, low volume of cooling water circulation, etc.
2. Water in feed fluid is evaporated when feed fluid flows downwards with accelerating speed and more pressure, which makes falling film evaporators suitable for the evaporation and concentration of feed fluid with rather high viscosity.
3. Feed fluid is evaporated in the shape of film in each pipe and the time of feed fluid being heated is very short, which makes falling film evaporators especially suitable for the evaporation and concentration of foodstuff and makes the preservation of most nutritional composition in foodstuff possible.
4. The process of evaporation is carried out under vacuum, which guarantees the sanitary and environmental requirements of feed liquid and remarkably reduces the evaporating temperature. Moreover, part of secondary steam is inhaled back into the first shell by way of spray type hot pressure pump to mingle with live steam, which saves a lot of live steam. At the same time, steam from hot pressure pump enters heating shell in the shape of spray and spreads swiftly, which makes feed liquid heated mildly. Therefore, falling film evaporators are suitable for the concentration of heat-sensitive raw materials.
5. The equipments are suitable for the evaporation and concentration of foaming raw materials.
As feed liquid is evaporated in the shape of film, steam and liquid are already separated in heating pipes. At the same time most feed liquid is pumped out at the bottom of the shell. Only a little feed liquid with all secondary steam come into the separator to be forcefully separated. Feed liquid has not formed tremendous impact. So the formation of foams is avoided.
6. With regard to the concentration and evaporation of foodstuff, the equipments also have the function of killing germs. Law materials are preheated in advance, and then come into a sterilizer with the temperature of more than 94. After being kept in the sterilizer for 24 seconds, law materials come into the first shell and the flash evaporation occurs instantaneously and the temperature drops instantly.
7. The equipments are equipped with CIP cleaning system, realizing in-place clearing. The complete set of equipments is easy to operate, without dead corner.
8. They are ideal equipments for continuous feeding and discharging
9. They are equipped with automatic system, realizing the autocontrol of inlet amount, heating temperature, the concentration of discharging and cleaning. They can also be equipped with safeguard of sensitive law materials against sudden power failure, malfunctions and other automatic operating and control systems of safety and alarm.
Wooden case.
