Cf01 are series of decorative self adhesive films which are used three-dimensional textured vinyl that reflects light the same way as real carbon fiber parts to imitate the real carbon fiber effect. It is comprised of color textured vinyl with clear permanent adhesive and pe coating silicon release paper.
Depend on your orderquantity,
150um*1.52m*50m/roll.
1. Advantage
* Economical type, money saving,
* Short term outdoor using. 1~1.5years
* Soft film, good uneven holding ability
Specification:
Vinyl thickness Liner Width Length INK
80 micron 120g/m2 paper 0.914/ 1.06/1.27/1.37/1.52m 50m Solvent, eco, UV
2. Use area
HK102 is intended for making graphics in the following area
* Body of car, bus, truck, subway sign graphics
* Flat wall body
* Other flat substrates such as foam board, banner sheet
3. Limitation
This type is not recommended for the following applications:
* High substrates light block area
* Dirty, solvent cleaned, grease, silicon coating which affect the adhesion
of the glue.
* Lacquered or painted surfaces freshly. The dried lacquered must be
tested by user for compatibility
4. Temperature ranges
Minimum application temperature > 9XC
Service temperature range - 15XC to~ 70XC
5. Shelf life:
1 year in material's original packaging, storage temperature of 15-22 deg C.
(80-100)um*(0.914,1.06,1.27,1.37,1.52)m*50m/roll.
Advantage
* Suitable Solvent, ECO ink printing
* 180g rigid high weight art paper, easy for lamination and field
installation.
* Soft vinyl (28Pa hardness) is suitable for arched glass surface.
* Strong adhesion, anti-wind, anti UV.
* Complete removable glue, no glue leaving behind the window after using
Specification:
Hole Ink
diameter
Open
rate
Film thickness
with glue
Liner Paper Width
Solvent ECO UV
1.6mm 40% 150micron 180g art paper 1.27 / 1.37 /1.52m Yes Yes NO
2. Use area
GK1001 film is intended for making graphics in the following area
* Window of car or bus sign graphics
* Building window for sign
* Interior glass sign faces
* Other transparent substrates such as transparent acrylic, polycarbonate
3. Limitation
This type is not recommended for the following applications:
* The surfaces of substrates are dirty, solvent cleaned, grease, silicon
coating which affect the adhesion of the glue.
Great K2 Industry Co., Ltd R & D Center
- 2 -
* The glass has built-in heating, defrosting elements or wipers
* Restrict the safe operation of emergency window exits
4. Temperature ranges
Minimum application temperature > 9XC
Service temperature range - 25XC to + 75XC
5. Shelf life:
2 year in material's original packaging, storage temperature of 15-22 deg C,
relative humidity of 50¡ã55%.
6. Durability:
1 year in outdoor solution. But it also depends on printing method and ink.
Correct substrate preparation and maintenance of vinyl will enhance durability.
7. Technical data
Composition High gloss vivid white/black vinyl
Thickness with glue 150 Film micron
Shrinkage after application ¡Õ1.1%
Adhesive Type Clear Acrylic Solvent, pressure sensitive
Removable ability Removable
Adhesive Thickness 0.02¡Ó0.003 mm
Adhesion
2.4 pounds/inch (Acrylic and uncoated, clear
polycarbonate) 180 degree pull back testing.
Type Rigid PE coating silicon art paper
Weight 180g/m2
Release force 40g
Liner
SA rate >85%
Salt water testing 100h/23XC no variation.
150um*(1.27,1.37,1.52)m*50m/roll.
