1:Material:sus/aisi304, sus/aisi304l, sus/aisi316, sus/aisi316l
2:Wire diameter: 0.025mm---5.50mm
Stainless steel soft wire
1: Material: sus/aisi304
Sus/aisi304l
Sus/aisi316
Sus/aisi316l
(your requirement is available)
2: Wire diameter: 0.025mm---5.50mm
3: Tensile strength: 650n/mm---800n/mm
4: Spool dimensions: flange diameter: 120mm, spool barrel diameter: 78mm, hole diameter: 15mm
5: Kinds of stainless steel wire: hard wire, stainless bright wire, soft wire.(your requirement is available).
6: Uses of stainless steel wire: wire drawing, weaving soft tube or wire mesh, steel wire filter products steel-rubber wire, spring wire etc.
7: Packing: approx 4kg/spool, 4 spools/carton, 48 cartons/pallet, approx 800kg/pallet. (coil with plastic inside woven bag outside or plastics inside hessian outside others are also available at the customers requirement.)
8: Stainless steel wire can be classified into stainless steel soft wire and stainless steel hard wire according to the processing differences.
Din250.
We perforate a wide range of round, square, slotted, decorative and even odd shaped perforations from a numerous metal sheets. The most common percentage of open area is between 30% and 50% although more extreme open areas are available depending on the perforation. Some times the percentage open area has to be kept lower for increased strength and flatness of the perforated metal sheet especially when galvanising.
The maximum sheet thickness, which we can perforate up to, is 25mm, the most common thickness range for balustrade infill, cladding panels is between 1.5mm and 3.0mm although heavier specifications do away with having to frame the sheets with something like edging profile which we also supply.
How to Make Perforated Sheets:
The sheet is fed to the machine by means of a Roller System Mechanism. The die is preloaded on the machine. On feeding the sheet, the upper section of the machine starts stroking. The sheet is perforated as per the die and is advanced by the amount of the perforated pitch set on the machine, with the next stroke of the slide. This cycle of feeding and perforating continues automatically.
Major Applications:
Mining
Chemistry
Agriculture
Architecture
Air and Oil Filters
Screening process for Grain
Drying
Furniture
Hammer Mills, Etc.
Materials:
Sheet steel,
Stainless sheet,
Aluminum sheet,
Galvanized and Other Metals.
Measures Standard:
Sheet size: 1 X 2 meters.
0,915 x 2.44 (3 'x 8')
1.22 X 2.44 (4 'x 8')
0,915 x 3.05 (3 'x 10')
1.22 x 3.05m (4 'x 10')
Available in size 26 to 1 / 2 "in Stainless Steel or in carbon steel.
Holes from 0,020 "to 5" in diameter.
Perforated Mesh Types:
Round;
Square;
Rectangular;
Decorative.
Special designs according to the specifications upon request.
1000MM*2000MM, 1250MM*2500MM.
