gypsum powder machine
The big sized gypsum stones are crushed into granules which are less than 25mm by the crusher. After storing and conveying, they will be conveyed into mill for grinding.Then they will be classified through a analytical engine. The qualified powder will be conveyed to the calciner for calcination, while the unqualified one will return to the mill for further grinding until it is qualified. The calcined gypsum powder (it¡¯s usually called Plaster of Paris) will be stored in the finished product silo for the preparation of plasterboard raw material or directly packing and transport to the customer;s site.
There are two types of the gypsum powder productionline. One uses the direct burning calciner (it is usually used in the small capacity line, such as 20000 or 30000 tons per year), the other uses the fluidized bed furnace (it fits for all the capacity of the gypsum powder line. This style is very popular in the gypsum powder industry.).
Use 40 feet container to transport.
The paper faced gypsum board production line is the professional equipment for producing the new decorated material. The principal working process are as follows: first, we take certain amount of hemihydrate gypsum powder, water and other additives, through the automatic measurement device and automatic conveying system, they will be conveyed into the mixer and changed into the gypsum slurry which will be scattered on continuous moving faced paper evenly. Second, at the same time, with the continuous moving and vibrating, the slurry will gradually diffuse and even scattered. Then the slurry will go into the forming machine and compound with the top and bottom faced paper. By the process of extruding and forming, the slurry will be encased by the faced paper and the continuous pulpous gypsum boards are formed. Third, In the forming line, the wet solid paper faced gypsum board will be gradually formed after the process of recondition, natural coagulating, automatic cutting, etc. The wet board will be arranged according to the programmed control system. With the help of rollers, belt conveyer and overturner, they will quickly enter into the dryer. Fourth, the board will be strictly controlled in the separate temperature zone of the dryer. After blowing into different thermal hot air, the moisture of the wet board will be evaporated. Because of the reaction of the starch, the board will be attached to the faced paper, and then the dry gypsum board will form and exit from the dryer. Moreover, after passing though overtuner and the folding device (the front side is inside) for the second time, the board will be cut into certain specification by saw. Finally, the finished gypsum board will be conveyed to the automatic sealing device and the stacker. After the stacking, the board will be transported to the finished products warehouse by the forklift.
40 feet container for transportation.
1. PVC film lamination machine
Usage and Characteristics
The lamination machine is used to paste the decorative film and boards together. First, put the board on the rollers. After the dust collection process, coat the glue on the boards, the glue will be qualitatived after conveying on the guide rollers. Then it will be combined with the film and enters into the recombination mechanism. After passing and cyclic rolling of the two lines of press roller, pinch roller and forming roller, the recombination is finished.
The machine is fit for the surface decorative materials, such as pasted and compound decorative film and decorative paper, etc of the PVC baseboard, profile, low foaming board and wood board, etc.
Specification:
Max lamination width: 1300mm
Max lamination speed:2-15m/min
The thickness of the laminated board: 2-50mm
Transmit power: 4.50kw
Power: 380V,50HZ(can be made according to the inquiry)
Size: 12600*1950*1600.
2. aluminum film lamination machine
Usage and Characteristics
The lamination machine is used to paste the decorative film and boards together. First, put the board on the rollers. After the dust collection process, coat the glue on the boards, the glue will be qualitatived after conveying on the guide rollers. Then it will be combined with the film and enters into the recombination mechanism. After passing and cyclic rolling of the two lines of press roller, pinch roller and forming roller, the recombination is finished.
The machine is fit for the surface decorative materials, such as pasted and compound decorative film and decorative paper, etc of the PVC baseboard, profile, low foaming board and wood board, etc.
Specification:
Max lamination width: 1300mm
Max lamination speed:2-15m/min
The thickness of the laminated board: 2-50mm
Transmit power: 4.50kw
Power: 380V,50HZ(can be made according to the inquiry)
Size: 12600*1950*1600.
It uses 40 feet containers to transport.
Specifications
The PVC laminated gypsum boards enjoy moisture-proof, dirty-proof, sound absorption, anti-sinking, easy installation
Item Sizes Thickness Packing Weight Back Treatment
PVC laminated gypsum boards
595*595MM
600*600MM
603*603MM
605*605MM 7.5MM
8.0MM
8.5MM
9.0MM
9.5MM
10.0MM
Shrinking Packing
17KGS
Alunimum foil
1. The PVC gypsum ceiling boards are applicable to business building, hotel, hospital, factory, shopping mall and other public building and family decoration.
2. The products enjoy moisture-proof, fire proof, dirty-proof, sound absorption, anti-sinking, easy installation, excellent finish, environmental protection and other characters. The surface treatment and design can be different.
3. Transportation: 20GP container.
4. We are professional manufacture for decades. We win the trust from home and abroad for the high-grade products and excellent service.
use 20 feet or 40 feet containers to transport.
gypsum board
The paper faced gypsum board is a lightweight decorated material with all kinds of specifications. The principal raw material of the gypsum board are calcined gypsum(natural gypsum, desulfurized gypsum£¬ardealite) and face protective paper and it also contains a certain proportion of water, starch, accelerator and foaming agent. After the process of mixing, forming, cutting, drying, size fixing, the paper faced gypsum board will be formed. It has the following advantages: lightweight, fireproof, thermal insulation, vibration-proof, simple processing, convenient operation, and the fine and beautiful decoration effect etc.
it use 20 feet or 40 feet containers for transportation.