Elementech International Co., Ltd

Product Introduction SANDI AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-750VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface (Optional)

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

[Specifications] Input: AC100V-240V 50/60Hz. Output: DC12V~2A (1.5A,1A,800mA, 500mA,400mA,200mA,100mA all compatible, can adjust output current depends on your devices input) Max power: 24W (20W/18W/15W/10W/8W/5W all compatible) DC plug size: 5.5mm x 2.1mm Polarity: inner positive+/outer negative- (same as most DC12V devices). [Safety & Durability] Over voltage/ over current/ short circuit/over loaded/surge protection system loaded, robust design with fireproof shell and superior heat dissipation board, without fan noise, CE/FCC/DoE VI certified safety insurance and energy efficient. [Compatibility] Except for the common 5.5 x 2.1mm DC plug, this power supply also be customized with other plug tips, support almost all small DC12V devices such as LED Strip Lights, WIFI Router, ADSL Cats, Bluetooth speaker, GPS, webcam, digital piano keyboards, Switches, CCTV Security Cameras and other devices which are powered by DC12V (2A,1.5A,1A,800mA,500mA,400mA,200mA,100mA) power supply.

Customized coil size, 95 PCB or PCBA board assembling.Customized magnet pad etc. Provide us your specific drawing or samples. Product Advantages 1. Professional engineer 2. Good after-sale service 3. Qualified material and competative price 4. RoHS, SGS, compliant Application 1.Cell phone charging 2.Beauty meter charging 3.Electric toothbrush Intelligent desk fast charging Payment & Shipping We accept payment via T/T bank transfer. 1.Once confirmed the order, and payment sent after finishing goods. Goods will be sent within 7 days with the fast ,reasonable and efficient shipping mode such like DHL. EMS. UPS. FEDEX. TNT etc. 2. Please make sure your postal address is correct. Any lost and mistakes because of wrong address are not supplier's responsibility. 3. Please do not bid if you disagree with the shipping and handling charge

Kiaisi K-9201 / K-9208 8-in-1 phone and professional Android Phone Battery Activation Charge Board with Micro USB Cable, Kiaisi K-9201 8-in-1 phone Battery Activation Charge for Phone Instructions: Kiaisi K-9201 phone Battery Activation Charge 1, fasten the battery when the battery voltage is lower than 2.5V, digital meter and due to insufficient power supply indicator is not displayed, the normal display is higher than 2.5V. 2. The voltage display to adjust the sound output voltage (power supply maintenance), the higher the voltage, the greater the current, when the table on the right shows battery voltage is lower than or equal to 3V, please repair the power supply output voltage is adjusted to 3.5V the following trickle charge mode with charge 1-2 minutes after turning on the power cord, the right table displays the current charging voltage. 3, if the buckle battery voltage of 3.6V or more displays can be used directly to charge more than 4V, the maintenance of the power supply voltage increase, the left side of the digital table shows the current charge current, the right digital table shows the current charging voltage. 4, For fast charging, note the increase in voltage while the current left display, the maximum can not exceed 2A (2000MA), otherwise it will be automatically protected.

Supplier: Adapter, power supply, charger, battery

Universal Input: 100~240VAC 50~60Hz Protections: Short circuit/ Overload/ Over temperature O/P: High accuracy, low noise; Hold up time 20mS Cooling by free air convection; Auto recovery; Operation temperature: -10~+40; 100% full load burn-in test for 8 hours High Efficiency, high reliability; Built-in Class B EMI Filter Long life of 50, 000Hours, 2 years warranty Compliance to EN60950 /UL60950 /EN55022.