Dayu Striping Machine Co., Ltd

DY-SPTC-II Self-Propelled Thermoplastic Convex Pavement Striping Machine adopts the latest intelligent process controller and the humanized control panel. It finishes the vibrating line and flat line construction work at the same time. The variable speed transmission system can be flexibly operated in forward and back off, which greatly improves the construction efficiency. The regular profile shape, profile height, profile space and profile quantity are precise and perfect. The machine can meet different needs of roads in different countries and areas with the features of high deformation, abrasion and shock resistance etc. 1) Engine: American Briggs & Stratton 5.5HP gasoline engine. 2) Controlling system: Micro-computer controlling system with electronic display. Various standard line. The profile quantity, profile length and profile height and profile space can be adjusted freely. 3) Driving: The variable speed transmission system can be flexibly operated in forward and back off with power, which ensures fast construction speed and high work efficiency. 4) Paint tank: Stainless steel outside (or high temperature resistant baked coating SC steel) and inner thermal insulation bucket. Capacity:120KG (60L). 5) Capacity of glass beads bin: 15KG. 6) Glass beads dispensing: The automatic dispenser is synchronous with the marking system. The dispensing quantity can be freely adjusted. 7) Marking shoe: The single screeding marking shoe is made of special material with the characteristics of high temperature, shock, abrasion and deformation resistance. The floor knife is made of hard alloy. 8) Marking width: 100/150/200/300mm (Special sizes can be customized). Base line thickness: 1.5-2.5mm (adjustable). Profile height: 3-7mm (adjustable). 9) Climbing capacity: 15 degree. 10) Direction controlling: The back stern wheel is equipped with locating device which ensures the machine walks in straight line or operates easily when turning. 11) Heating: Liquefied petroleum gas (LPG). 12) Warning light: The machine is equipped with high brightness warning light, which is convenient for the constructions especially at night. 13) Net weight: 250Kg. 14) Dimension: 1420mm(length)*1100mm(width)*1300mm(height)

DY-HPT Hand-Push Thermoplastic Pavement Striping Machine, used together with the pre-heater to mark lines, is the general equipment in the thermoplastic road marking constructions. Its marking shoe material and manufacture process are good, the floor knife is durable and abrasion resistant, the glass beads dispensing is even and adjustable, and the operation of straight lines and curved lines is precise. The marking line has the advantages of regular edge and head, uniform thickness and beautiful shape. 1) Paint tank: Stainless or high temperature resistant steel ektexine and inner bucket. Capacity: 70kg. The heating temperature can be freely controlled according to the different kinds of paint chosen by users. The tank is equipped with plug type hand stirring device. 2) Capacity of glass beads bin:12kg. 3) Glass beads dispenser: The automatic glass beads dispenser is synchronous with the marking system. The dispensing quantity can be freely adjusted. 4) Marking shoe: The screeding marking shoe is made of special material with the characteristics of high-precision, shock resistance and high temperature resistance. The standard configuration is 150mm. 5) Screeding knife: Hard alloy with eccentric device. The line thickness can be adjusted by coordinating with the adjusting device in the front of the marking shoe. (Adjusting range: 1.5mm - 2.5 mm.) 6) Rubber wheel: The wheel is made of heat resistant rubber. The back stern wheel is equipped with locating device which ensures the machine walks in straight line or operates easily when turning. 7) Marking width: 100/150/200/300mm (Special sizes can be customized). Marking shoe can be changed into different sizes according to the construction requirements. 8) Heating: Liquefied petroleum gas (LPG). 9) Net weight: 150Kg. 10) Dimension: 1200mm(length)*950mm(width)*1100mm(height)

DY-TMA Truck-Mounted Airless Pavement Striping Machine is a high pressure, large-flow, airless spraying machine. This machine makes use of gasoline engine to drive the plunger pump through hydraulic system, and sprays paint by controlling hydraulic pressure and flow direction. The spraying line has advantages of uniform thickness, regular line edge and beautiful line shape. The spray gun bracket is motile articulated design, which can adjust the marking width easily and precisely. The operation system is equipped with micro-computer controller, which is used to choose the line type and adjust the dotted line spacing according to the construction requirement. 1) Engine: American Briggs & Stratton or Japanese Robin 13HP gasoline engine. 2) Paint pump: The single vertical large flow plunger pump has the characters of good abrasion resistance and is easy to maintain. The largest flow volume of single plunger pump is 20L/min. The highest pressure is 20 Mpa (working pressure is 8-12Mpa). 3) Structure: High strength welding structure. The engine drives the hydraulic cylinder through the hydraulic pump and the hydraulic controlling system. It is easy to operate. 4) Paint tank: Double large volume paint tank (150kg*2) with hydraulic automatic stirring device. 5) Spray Gun: This truck mounted airless road marking machine's spray gun is equipped with hard-edge columnar reverse waster nozzle which makes it easy to discharge the blockage. 6) Glass beads spraying system: Equipped with glass beads spraying system. 7) Guiding: The telescopic guide arm can be adjusted freely up and down, left and right. 8) Spraying width: 100-400mm. 9) Dimension: 1400mm(length)*1120mm(width)*1500mm(height) 10) Net weight: 430kg.

DY-TMA AB Truck-Mounted Airless Pavement Striping Machine is a high pressure, large-flow, airless spraying machine. This machine makes use of gasoline engine to drive the plunger pump through hydraulic system, and sprays paint by controlling hydraulic pressure and flow direction. The spraying line has advantages of uniform thickness, regular line edge and beautiful line shape. The spray gun bracket is motile articulated design, which can adjust the marking width easily and precisely. The operation system is equipped with micro-computer controller, which is used to choose the line type and adjust the dotted line spacing according to the construction requirement. 1) Engine: American Briggs & Stratton or Japanese Robin 13HP gasoline engine. 2) Paint pump: The double vertical large flow plunger pumps have the characters of good abrasion resistance and are easy to maintain. The largest flow volume of single plunger pump is 20L/min. The highest pressure is 20 Mpa (working pressure is 8-12Mpa). B Type can operate three or four spray guns at the same time to spray lines in single or double color. 3) Structure: High strength welding structure. The engine drives the hydraulic cylinder through the hydraulic pump and the hydraulic controlling system. It is easy to operate. 4) Paint tank: Double large volume paint tanks (150kg*2) with hydraulic automatic stirring device. 5) Spray gun: Pneumatic spray gun is equipped with hard-edge columnar reverse waster nozzle which makes it easy to discharge the blockage. 6) Glass beads spraying system: Equipped with glass beads spraying system. 7) Controlling: Equipped with PLC micro-computer controlling system, which realizes to automatically set and operate single flat line, double flat lines and various kinds of broken lines. 8) Guiding device: The telescopic guide arm can be adjusted freely up and down, left and right. 9) Spraying width: 100-400mm, B type 100-1000mm. 10) Net weight: 700kg. 11) Dimension: 1400mm(length)*1120mm(width)*1500mm(height)

DY-SPA Self-propelled Airless Pavement Striping Machine not only has all the performances of the Hand-Push Airless Pavement Striping Machine, but also owns the variable speed transmission driven device which improves construction speed and reduces the labor intensity. It is the best choice for large-scale constructions and constructions of mountain road. In addition, the machine is equipped with lighting and safety warning lamp which is convenient for the constructions, especially at night. 1) Engine: Japanese Robin 6.0HP gasoline engine. 2) Paint pump: Adopt imported diaphragm high pressure airless pump, large flow volume and stable pressure. The highest pressure is 20mpa (working pressure is 10-15mpa), the largest flow volume is 8.5L/min. 3) Paint tank: Capacity: 60L. Equipped with filter device in paint tank and a integral type filter in feeding port of tank. 4) Spray gun: Double manual spray guns with hard-edge columnar reverse waster nozzle which makes it easy to discharge the blockage. The 6m lengthening pipe equipped is used for spraying arrow, words and other special marks. 5) Direction control: Back wheel locating device ensures the machine walks along straight line and operates easily when turning. 6) Spray width: 100-450mm. 7) Net weight: 350kg.