Product name: Laminating machine Detailed product parameter description: Product Model: Our company has its own coating production line, which can provide surface coating protection for cold-rolled, galvanized, stainless steel, copper and aluminum plates with high requirements on material surface quality, effectively reducing various surface damages and scratches during processing and transportation of materials. At the same time, we welcome processing with supplied materials.
Fms-z1100automatic water-soluble laminating machine It has two purposes for common lamination and window lamination. High speed feeder, ensure stack paper more steadily. Equipped with pneumatic drying vacuum pump, no need for oil. High precise front register and side register are adopted to correct paper automatically and laminating precision is increased. It adopts immerding coat that makes the varnish be more even and glue saved .Equipped with high precise automatic paper punching equipment, automatic film cutting system. The core designed rubber roller together with steel roller enhances the evenness of gluing, strength of stickiness as well as lowering the production cost Coating part adopts the page control system automatic circulating glue. plc controller, equipped with papers counting, machine-ceasing protection during paper shortage and automatic mucilage supplying system.
This is a Combo of Plain and Thermal Lamination Machine. A single Machine is equipped with both gum tray as well as heater roll. This Machine gives the Operator choice to switch the same machine as plain or thermal as per his Choice. It saves the space and Combined Price wise, Cost of Machine is cheaper. INPUT: SHEET FORM OUTPUT: ROLL FORM
Model: OCTANS-126X Max. laminating width : 1200 mm Max. Sheet size: 780 x 1200 mm Min. Sheet size: 340 x 406 mm Paper thickness: 105 ~ 450 gsm OPP film thickness: 12 ~25 £g Laminating speed: 15 ~ 50 m/min (Depends on sheet weight, size and quality, films¡¦ and glues¡¦ quality) Power required : 70.87 kw (380V AC 3£p 50HZ) Dimension(L ¡Ñ W ¡Ñ H) : 10983 ¡Ñ 2530 ¡Ñ 2820 mm Weight : 8300 kg.
This is also known as Hot / Heat Lamination Machine. As the name suggests, Machine is equipped with heater Roll to Heat the Wax Coated film. The Machine Laminates the Heated Film to the other Sheet using heated rollers and Hydraulic Pressure system under strong pressure improves the bond strength of the laminate. INPUT: SHEET FORM OUTPUT: ROLL FORM
Kfm-1020 window film machine is aâ new generation with the current requirements of environmental protection can be opened and common dual-purpose glue laminating equipment. The use of water-soluble glue glue film production, non-toxic, no smell, no pollution of the environment. Widely used in cards, calendars, packaging and trademarks of high-grade printing surface treatment. This machine has the advantages of reasonable design, convenient operation, safety, reliability, economy and practicality. The film lamination products good adhesion, high transparency, three-dimensional sense of strong, dissolved the printed surface dusting, snowflake spots. The motor adoptsâ imported frequency converter stepless speed regulation, stable performance.
Very Hot Application: sake, soy sauce, vinegar, chemical liquid, ultrasound gel, fertilizer liquid, diluent, detergent, desinfectant, hand sanitizer. Suggestion A: Cubitainer Material: LDPE Advantages: soft plastic, collapsible, light weight, food grade Size range: 1L~25L. Price: 40% Higher than B Suggestion B: Cheertainer Material: Inner layer: PE ; Outer layer-PA+PE. Advantages: Environmental, cost reduction, form-fit, EU certificate, future packaging trend Size range: 3L~25L Price: 40% lower than A Shipping and storage cost: 50%~60% lower than A; Usually, our flexible containers comes with box, container and cap. But we also sell box and containers separately. We have 10 years exporting experience. Our workshop is dust-free. We always get good shipping price ( to the destination ports ) for CIF terms
Product application For the rectangulare epe laminating, also known as the protective angle laminating, the whole procedure no need for glue, all by ironing By using the principle of electric hot air gun, two strips of sheet epe are put into the machine transmission place to be glued together at the same time. The epe is automatically heated by hot air when feeding, so as to be plasticization forming. Still confuse let's see our vedio at top. High speed laminating, it is equivalent to the efficiency of 5-8 operators. Laminating does not deed to glue the sol, epe does not become yellow, the laminating is neat, not misplaced.
SG-3000 vacuum EVA glass laminating / laminated machine is a professional equipment to produce laminated glass without autoclave. It is able to produce various laminated glass thanks to the advantages of this machine and specific film. You can insert the silk, metal mesh, fibre or other films into normal glass sheets in order to produce decorative and functional laminated glass. SG-3000 is designed by means having solved many problems and difficult basis on decade experience, such as: Polluted glass by excessive adhesive, asymmetrical heating, low production but high energy consume etc. It is equipped with multilayer vacuum beds, and each bed is able to load double units so that the production capacity is double times than normal oven. This is a unique design of SG-3000-4DD. SG-3000-4DD applied with draft fan system, so that can generate an even temperature, multi rubber bags can be load at same time, PLC system and multi-area control as optional. The machines with different number of floors (from one floor to five floors) and working stations (single or double) are all available for your choice according to your production requirements. wooden case
