Magnetic Stirrer Digital LCD Display Last Measurement in Memory Heating amp Stirring can proceed Simultaneously Bushless Motor for Low Noise Anti scratch and Corrosion Resistance Ceramic Plate Surface ABS Cabinet Brand Labtical Model NameNumber MS5LH Type Magnetic Stirrer Speed range 1002000rpm Maximum mixing capacity 5000 ml Temp Range amp Accuracy 300C Accuracy 1C Temperature Sensor PT100 Time range 099h99min Top Plat Size 168 x 168mm Display LCD Motor Type Bushless Motor Operating Mode Temperature Speed Timing Memory last data Power 500W Power Supply AC 220V 5060Hz Packing Dimension 335 x 235 x17cm Weight 25kg
Wet Permanent Drum Magnetic Separators Are Used In Dense Media Separation (dms) Plants For The Recovery Of Magnetic Particles From The Dilute Medium. They Must Recover The Maximum Amount Of Magnetic Particles At The Highest Possible Density. A Wet Drum Separator Consists Of A Stationary Magnet Arc Around Which A Drum Rotates. The Drum Is Partially Submerged In A Tank Which Follows The Contour Of The Drum. Qj-ct(s/n/b)wet Permanent Drum Magnetic Separator Is A Wet-type Low-intensity Magnetic Separator With Relatively High Magnetic Field And The Most Efficient Magnetic Separation Equipment With Strong Magnetism For Minerals. Qj-ct(s/n/b) Wet Drum Magnetic Separator Is Ideally Used To Separate Ferrous Particles From Non-ferrous Particles. This Kind Of Magnetic Separators Are Made By Us To Provide Ultimate Protection To Crushers, Grinders, Pulverizers And Allied Equipment And Is Useful For Mining And Ore Dressing Industry, And Can Be Equipped With Semi-conflow(ctb), Con-flow(ctn) And Co-flow(cts) Tanks According To Customers' Requirements. Its Magnetic Induction Intensity Can Be Designed In Accordance With Specific Mineral Properties And Operation Processes. Characterized By Advanced Structure, Light Weight, Reliable Operation, Easy Maintain, Serialized Products And Standardized Parts, The Wet Magnetic Drum Separator Can Meet The Needs Of Plants Indifferentsize. Qj-ct(s/n/b) Applications: (1) For Primary Rough Dressing And Refused Tails, Increasing Recovery Rate And Reducing The Load Of Second-stage Grinding. (2) For Concentration Of Ferromagnetic Minerals, Increasing Ore Grade And Recovery Rate. (3) Used Before High-magnetism Separation To Remove Ferromagnetic Minerals From The Ore And Prevent Magnetic Clogging. (4) For Recovery Of Heavy Media At Coal Processing Plant We Can Design As Your Require
Dry permanent magnetic separator for block ore is a kind of new type separation equipment for ore with high-performance. Besides existing types of magnetic drum separators, our company can also develop magnetic separators (or magnetic pulley) which can possess various magnetic induction intensities with different types of belts according to customers' requirements. This dry drum magnetic separator has the following advantages: high magnetic induction intensity, advanced structure, light weight, reliable operation and easy maintenance. Applications: (a) for pre-separating at magnetic separation plants, to remove stones mixed in ores, restoring the geologic grade of ores, saving enery and increasing the treatment capacity of the plant. (b) used in mining stope to recover iron ore from waste stones and improve resource utilization rate. (c) for slag treatment at steel mills to recover metal iron. (d) for garbage disposal to separate and recover usable metal which would be helpful to the environment. Electromotor power and belt length can be designed according to site conditions.
QJ-FK Dry Permanent Magntic Separator for Powder Ore is high-efficiency ore concentration machine newly designed by our company which is widely used to remove, purify or separate materials, allowing them to be of higher values. This kind of dry power permanent magnetic drum separator is characterized by its turbulent magnetic field and high separation factor, advanced structure, light weight, large throughout, reliable operation and easy maintenance. Rely on our elaborative efforts, it becomes great for the dry and arid regions to save water resources and reduce production cost, opening a new way for magnetite mining and utilization. The dry permanent drum magnet separator for fine ore also can be driven by diesel engine, if it is used in region which is short of electricity Apart from existing fixed types, this kind of dry type magnetic drum separator with different magnetic induction intensity and application for different magnetic materials can also be developed according to the specific requirements of customers. The current magnetic separator series are appropriate for the different size mines from large to small. Moreover, we have industrial prototypes and could provide pilot tests at customers' request. Dry drum magnetic separator is mainly used in the following applications: (a) For pre-separation of low-grade ores, to pre-concentrate ores, raise ore grade and reduce production cost. (b) For re-separation of tails, to recover relatively rich tails on the dry slope of tails dam. (c) For magnetic purification of dry fines of pyrite cinder. (d) To effectively remove iron from non-magnetic materials with lower cost. (e) For purification of concentrated fines, to remove lean associated materials and gangue from concentrated iron fines, lead to the grade improvement of fines and increase the technically-added value of products. TYPE Drum Dia*Length(mm) Rotational speed (r/ min) Magnetic induction on drum surface in separation(mT) Upper limit of particle size of raw material (mm) Capacity(ton/unit*hour) Weight (ton) Overall weight of plant(ton) 6.5 External dimension(mm)
Magnetic tubes are a simple low cost form of magnetic separation. Used in a variety of industries from food or plastics processing to chemical and powder processing, according to the environment of your product, these magnetic filter bars can be made with alnico, ceramic or rare earth magnet material. They can be easily installed into machinery or assembled according to the wishes of the customers. Encased in either 304 or 316 stainless steel tubes 25.4mm diameter, we offer them with either standard ferrite magnets or high intensity rare earth magnets (up to 12, 000 gauss). We manufacture them specifically to the length requested by the customer. The sealed stainless steel ends are drilled and tapped for fixing purposes
Magnetic Separator Industrial Metal Shredder Scrap Shredder Machine  It is scientifically designed and reasonably configured following customized schemes on customersâ??field ,output,material types and so on.It is high in automation; Monitored by computer,PLC control,safe,high-efficient,conservation of labor; Over 90% are produced by the component;quality materials are used for key components;it has exquisite techniques that are more solid and durable; All-out environmental supporting facilities on shock absorption,noise reduction and dust removal help bring down second-time pollution Remote diagnosis24 hours of uninterrupted after-sale service.
Hmds wet magnetic drum separator is widely used in coal mine processing. With the development and expansion of heavy media processing technique, drum separator for heavy media processing is widely used in coal-washing plant. The structure of coal mine used drum separator has never had big change, while with the application of new magnetic material, magnet developed from simplex ferrite, mixed magnet to rare earth super strength magnet. Magnetic intensity was raised greatly, improving the recovery percent and lowering media consuming effectively. Features: 1. Important role in coal mine recycling 2. High minmal permanent magnet 3.Keep magnetism for long time 4.Duble stainess steel structure of the pullyer 5.High recycling rate Heavy media content rcycling rate 87-130kg/m3 >99.7% 130-260kg/m3 >99.8% >260kg/m3 >99.9%