Calomi rock paint which combine with natural mineral and waterborne polymer perfectly.By the scientific method .It copies the rock grain effect of the natural granite and shows the texture realistic, which looks like the original granite . And its texture give a person as grave, rugged, atmosphere visual enjoyment. It is wildly useful for the interior wall and exterior wall decoration of villa ,department , office , modern building ect. And it also can be used as the decoration of exterior wall relief , beam . Does not contain pollutants , health, non-toxic, natural environmental protection , which meets the needs of modern life of human environmental protection .
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Flugger data sheet Facade 25 Product description Type: Acrylic emulsion elastomer wall covering facade paint, matt. Flugger Facade 25 is based on acrylic binder with high performance. It provides a weather-resistant, elastic, crack bridging and robust surface. The surface is permeable for water vapour, with a high barrier effect against CO2 and chlorides, which makes it suitable as concrete protection especially in urban environments. Protects the surface against formation of mould. The opacity of tinted colours is indicated on the tinting label. Product application Suitable exterior for finishing treatment on facades of concrete, masonry and plaster etc. Technical data Specific gravity: 1,35 kg/litre Gloss: 9 Solids: Weight%: 58 Vol.%: 43 Spreading rate: 8-10 m2 per litre and treatment£¨depending on the condition of substrate£© Wash ability Top level (GB/T 9266-1988) Application temp.: Recommended min. working temperature during drying/curing: +10¡æ Maximum atmospheric humidity 80 % RH Drying time at 20¡æ, 60% RH: Dry to touch: 1 h Recoat interval: 6 h Fully cured: Several days Dilution: 1st coat: 10% water 2nd coat: Undiluted Cleaning of tools etc.: Water Storage: Cool, frost-free and tightly closed. 2.8L & 9.1L & 18.2L.
Product Category- Paint & Primers Product Name- Scott AWD Description of the product- Acrylic distemper paint for internal walls Area of Use (Application)- Internal walls Category (For Painters, Carpenters, etc.)- Painters USP of the product- 1. Economical paint for interior 2. Smooth finish Area of application- Interior
Stone Finish Natural Acrylic Paint Available In 4000 Designs, Excellent For Exterior Conditions
Acrylic Paints Water Base Paints Wall Paints New Acrylic, Vynil, Waterbase paints, White and colors, Residential and contractors grade, Name of product V600 Interior Acrylic Waterbase paint White and light colors Product origin : North America Key Specifications/Special Features : GENERALAcrylic vinyl paint with a matte finish is characterized by developing its hiding power when dry, recommended to be applied with a brush and roller on plaster, concrete, wood and flat surfaces in general. Minimum Order Size : Full Container Loads DENSITY (g/ml) 1.31 +/- 0.035 a 25°C BRIGHTNESS 10 to 20 Glitter Units at 60 ° DRYING TIMETo the touch 30 minutes, at 25 ° C (77 ° F) and 50% humidity-relative. The drying time can be increased depending on the environmental conditions and the substrate. Quality From ISO 9000 paint manufacturer
Nutex Texotile Wall Paint-super Fine Coatings For Exterior Gloss-weather Resitant Paint -suitable For High Temperatures-heat Resistant Paint
Paint Emulsions We supply wide variety of premium quality water based emulsions for the paint industry. The emulsions are selected based on the applications depending on interior or exterior paint formulation. We also supply paint aids such as thickeners and dispersing agents which are mostly performance polymers used in manufacturing good quality water based Acrylic Paints.
Acrylic Wood Sealer Acrylic Matt Topcoat Clear Acrylic Gloss Clear Full Gloss Acrylic White Full Gloss ACRYLIC WHITE MATT ACRYLIC BLACK GLOSS ACRYLIC COLOURS APS/RAL ACRYLIC SEALER ACRYLIC MAT TOPCOAT CLEAR ACRYLIC WHITE PRIMER ACRYLIC MATT TOPCOAT WHITE
