1. Description: It is the raw material for making thermosetting resin, light curing epoxy resin coating, oil resistant coating and drying coating. Its copolymer emulsion is used for fiber finishing, fabric, leather and paper coating. Also used as wood, metal and other adhesives. 2. Typical recipes Used as crosslinked monomer in acrylic emulsion. The amount of carboxyl-containing acrylic emulsion pressure-sensitive adhesive is L % ~ 2% of the total monomer mass, and the initial adhesion will be greatly reduced if it exceeds 3%. For emulsion adhesives without carboxyl group, the general dosage is not more than 5%. The crosslinking reaction temperature of MMAM alone is high, generally 120 ~ 170�ºC, and the addition of protic catalyst can reduce the crosslinking temperature. Acrylic acid (AA) can both provide hydrogen protons and copolymerize with acrylates, so MMAM should be used as a composite crosslinking agent with AA at a dosage of 3:2. Cross-linking agent HA can replace N- hydroxymethyl acrylamide, and does not contain formaldehyde. 3. Application scope A. Can be used as crosslinking agent, widely used in fiber modified resin, processing dyes, plastic adhesives, soil stabilizers, etc. B. Used for fiber modification, resin processing, adhesives and paper, leather, metal surface treatment agent. Free samples 4. Storage and packaging A. All emulsions/additives are water-based and there is no risk of explosion when transported. B. This product can be packed in 25KG,50KG,200KG,1000KG plastic barrels. C. Store sealed in a cool, dry and ventilated place indoors. Before use, the container should be strictly sealed after each use. D. The product should be well sealed during transportation, moistureproof, alkali strong acid and rain water and other impurities mixed.
Water undissolved substance(%): Minim Butanol undissolved substance(%): Minim 3. Usage: Its polymer or co-polymer can be used as flocculant, mud conditioner, blocking agent, mineral dressing agent, textile treatment agent, intensifier and water treatment agent. Most acrylamide is used to synthesize polyacrylamides, which find many uses as water-soluble thickeners. These include use in wastewater treatment, gel electrophoresis (sds-page), papermaking, ore processing, and the manufacture of permanent press fabrics. Some acrylamide is used in the manufacture of dyes and the manufacture of other monomers. 4. Product package The flocculant is packed in 25 kg paper plastic three-in-one compound woven bags, or according to users¡¡¥ requirement; its shelf life is 2 years. 5.Shelf life: 12 months. 25kg paper plastic bag
Appearance: White crystal powder Assay %: 98 Inhibitor: 0 Conductivity of 40% solvent(us/cm): 8-12 PH of 40% solvent (test paper): 5.5-7.5. 25kgs in PE bag lined 3-in-1 composite bag.
Acrylamide Cas no. 79-06-1 Appearance: white crystal Purity: 98% min 25kg per bag
Acrylamide Specification (Microbiological method) item index appearance white crystal acrylamide% 98.0 moisture% 0.7 iron ion(PPM) no polymerization inhibitor(PPM) 15 40% solvent PH range 7-8 40% solvent specific conductanceUS/CM5 ethyl alcohol insoluble substance no Package:25kgs/kraft paper bag with plastic inner, 16.5mt for 1x20 feet container.
Diacetone acrylamide
Quick Details INCI Name:ACRYLAMIDOPROPYLTRIMONIUM CHLORIDE/ ACRYLAMIDE COPOLYMER Appearance: White to yellowish solid Content of active matter 99% Min. Viscosity (250C, CPS) 2000-5500 Application: Styling gel , Hair Spray, Conditioner, Styling Wax, Conditioning shampoo, Elastin Benefits: - Curl retention - Frizz control - Improve style durability - Improve slip and lubricity of hair - Improve foam stabilization General Information: SC60A is a cationic high molecular polymer with strong Adhesion (molecular weight: 1.5-6 million). It possesses detangling, softening and good spreading properties. This ingredient offers characteristics such as reduced combing force on both wet and dry hair, slip and lubricity, substantivity and foam stabilization. It can be mixed with nonionic, cationic rubber powder K90 K30, and gel products, imparting a smooth touch and does not feel sticky. Packing&Handling Standard Packing: 25kg /box Life Span 24 months Store in dry and cool place, keep away from sunshine and rain.
Acrylamide is made by microbiological method. With the characteristics of higher purity and no copper and lower iron content, it is especially suitable for polymer production and uniform molecular weight spread. It is mainly used to produce different kinds of homopolymers and modified polymers and also is widely applied to medicine, dyestuff, painting and daily chemicals industries. Usage: its polymer or co-polymer can be used as flocculant, mud conditioner, blocking agent, mineral dressing agent, textile treatment agent, intensifier and water treatment agent. Most acrylamide is used to synthesize polyacrylamides, which find many uses as water-soluble thickeners. These include use in wastewater treatment, gel electrophoresis (sds-page), papermaking, ore processing, and the manufacture of permanent press fabrics. Some acrylamide is used in the manufacture of dyes and the manufacture of other monomers. Cas:79-06-1 Loading: 15500kgs no pallets 14000kgs with pallets Port qingdao, china
Acrylamide(CAS:79-06-1)
1.Chemical name: Poly Acrylamide (PAM) 2. CAS: 9003-05-8 3.Performance:White crystal 4. Application: polyacrylamide (PAM) is one of the most widely used water-soluble polymers. It is widely used in oil exploitation, papermaking, water treatment, textile, medicine, agriculture and other industries. There are three forms of polyacrylamide products: aqueous colloid, powder and emulsion. According to the characteristics of ions, it can be divided into four types: non-ionic, anionic, cationic and amphoteric. 5. Methods of use: before use, prepare the product with deionized water to a solution of 2-5 thousandth of molecular weight according to the proportion of use. In the process of configuration, the agitation should not be too intense, so as to prevent the polymer chain of the product from breaking due to the shear action and affect the use effect of the product. The prepared product solution should be prepared and used first, and the storage time should not exceed 24 hours. The simulated screening in the laboratory can determine the approximate dosage of the product, but it is necessary to adjust the super final dosage according to the site conditions. V. packaging and storage: kraft paper bag for external use, with plastic film package inside, net weight of each bag is 25kg, which can also be modified according to the user's requirements. The product is hygroscopic and should be stored in a cool and dry place with temperature lower than 35 ºC. Solid products shall not be scattered on the ground to prevent the ground from sliding after the product absorbs moisture. 6. Safety protection: pay attention to labor protection during operation, and avoid contact with skin, eyes, etc. 7. Specifications: ITEM Index Type 1 Type 2 Solid content (solid),w/% â?¥ 90.0 88.0 Acrylamide monomer content w/% â?¤ 0.025 0.05 Dissolution time (anionic) /min â?¤ 60 90 Dissolution time (non-ionic) /min â?¤ 90 120 Screen residue (1.00mm screen),w/% â?¤ 5 10 Screen residue (180 μ m screen),w/%â?¥ 85 80 Insoluble (anionic),w/% â?¤ 0.3 2.0 Insoluble (non-ionic),w/% â?¤ 0.3 2.5
