The Zimmer M/L Taper Hip Prosthesis is a product line from Zimmer Biomet, a company that specializes in orthopedic implants and devices. The M/L Taper Hip Prosthesis is used in hip replacement surgeries and consists of a femoral stem that is implanted into the patient's femur.
The "M/L 12/14 Taper" designation likely refers to the taper of the femoral stem, with 12/14 indicating the taper size. The "Standard Offset" specification suggests a standard offset design for the femoral stem. The offset refers to the distance between the center of the femoral head and the center of the femoral stem. Standard offset is a common configuration, but there are also variations such as high offset or low offset stems to accommodate different patient anatomies.
Key features and considerations for the Zimmer M/L Taper Hip Prosthesis may include:
Material: The femoral stem is typically made of biocompatible materials such as titanium or cobalt-chromium alloy.
Taper Design: The taper design facilitates the connection between the femoral stem and the femoral head component.
Modularity: Some hip prostheses, including those with taper connections, offer modularity, allowing surgeons to choose different head sizes and neck lengths to optimize patient fit.
Surgical Technique: Implantation involves removing the damaged part of the hip joint and replacing it with the prosthetic components.
Range of Motion: The design aims to provide stability, durability, and a suitable range of motion for the patient.
Specifications include a wide range of sizes, material thicknesses, and pressure ratings
Grades and Specifications
- MS Flanges (HSN Code: (730721),(73079190) in various grades such as IS 2062, ASTM A105, ASTM A36,ASTM A106,E 350 C,EN1092
- MS Circles (HSN Code: (720851),(73079190) in IS 2062, ASTM A36.
- MS Plates (HSN Code: (720851),(73079190) available in IS 2062, ASTM A3.
- 73072100: Pipe Fittings of Iron or Steel- 73079300: Carbon Steel Butt-Weld� Fittings
Grades of CS Flanges:
ASTM A105: Forged carbon steel.
ASTM A350 LF2: Low-temperature applications.
ASTM A516 Gr. 70: Pressure vessels.
ASTM A694: High-pressure use.
HSN Code:
7307.21: Flanges of iron/steel (non-stainless).
7307.29: Other pipe fittings of iron/steel.
Types of Flanges by M.R.A.C Steel Product
Slip-On Flanges
Commonly used for low-pressure applications. Easy to install and cost-effective.
Weld Neck Flanges
Ideal for high-pressure applications. Provides excellent structural integrity.
Blind Flanges
Used to seal off pipelines or create a stop. Designed for safety and reliability.
Socket� Weld Flanges
Suitable for small pipes and high-pressure systems. Ensures secure welding.
Lap Joint Flanges
Best for applications requiring frequent disassembly. Used with stub ends.
Threaded Flanges
Quick installation without welding. Suitable for small pipe sizes.
Spectacle Blinds
Two-in-one design for stopping flow or allowing it. Easy to use for maintenance.
Reducing Flanges
Designed for connecting pipes of different diameters. Ensures smooth flow.
Industries Served
*WE ALSO MANUFACTURE MATERIAL AS PER CUSTOMER REQUIRMENTS*
Supplier: Manufacturers, exporters & importers of stainless steel / copper / brass / aluminium / duplex steel / carbon steel / alloy steel in shape of pipes, tubes, flanges, pipe fittings,round bar, bright bars, angle bar, flat bar, hex bar, square bar, sheets, coils, strip, plates, wire, tie wire, strip banding, decorative tubes / pipe, valves, threaded fittings,forged fittings etc. in any shape / size / grade.
also specialised in high nickel alloys like inconel, monel, titanium, hastalloy etc. in any size / type / grade & as per drawing. Services: Manufacturers, exporters & importers
Being a customer-focused enterprise, we strive to bring forth a range of Spectacle Flanges. The products offered by us are extensively utilized to block an opening while the other one allows to flow through it. Due to anti-abrasive properties, resistance against wear & tear and durability, our offered products are widely acclaimed by the customers. Further, clients can avail these flanges from us in different technical specifications and forms of slip on, lapped, screwed, socket weld, blind, weld neck, slip on boss, plate, plate blank, reducing, spectacle and screwed boss in tandem with their needs.
Product Details:
Usage/Application Industrial
Type Lap Joint Flanges
Size 1-5 inch, 0-1 inch, 20-30 inch, 5-10 inch, 10-20 inch
Material Standard ASTM A182, ANSI B16.5, ASTM A351, ASTM A105
Rated Pressure (Bar) 2500
I Deal In New Only
Material Stainless Steel
Country of Origin Made in India
We can offer vide range of Lap Joint Flanges from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. Various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Fittings, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc.
Specifications: Can offer Lap Joint Flanges as cast, forged, normalized, annealed, quenched (hardened) tempered condition with black or bright (proof machined) finish.
Various type of IBR approved Flanges that can be procured are as follows: Blind, Slp-On, Welding Neck (Weldneck), Long Welding Neck (LWN), Socket Weld, Lap Joint, Threaded, Spectacle Blind, Plate, Collar, Flat Face, Raised Face, Ring Type Joint, etc.
Size range of flanges that can be offered are �½â?? inch upto 60â?? inch depending on type, class grade of flanges.
Class of flanges: #150, #300, #400, #600, #900, #1500, #2500
Metal Aids India a accredited with AN ISO 9001: 2015, 14001: 2015, OHSAS 18001 & PED Certified Company and was established in since 2010. We take the pleasure to introduce ourselves as a largest Manufacture & Exporter of all type of industries products like Flange, Forging Flange, Component Flanges, Precision Different Component Flanges in different shape & size (as per client drawing & specification) etc in CNC Lathe & Milling Machine (VMC)
Description: Stainless Steel Flange
Specification: ASTM / ASME B16.5, ASME N 16.47 SERIES
Size: 1/2" To 48" (15 NB To 1500 NB)
Type : Socket Weld, Slip On, Blind, Lapped, Screwed, Weld Neck, Long Weld Neck, Reducing, Spectable, Ring Joint Flanges
Class : 150#, 300#, 400#, 600#, 900#, 1500#, 2500#
Form : Circle, Square, Plate, Ring, Flat
Grade :
Specification: ASTM / ASME B16.5, ASME N 16.47 SERIES
Metal Aids India a accredited with AN ISO 9001: 2015, 14001: 2015, OHSAS 18001 & PED Certified Company and was established in since 2010. We take the pleasure to introduce ourselves as a largest Manufacture & Exporter of all type of industries products like Flange, Forging Flange, Component Flanges, Precision Different Component Flanges in different shape & size (as per client drawing & specification) etc in CNC Lathe & Milling Machine (VMC)
Description: Stainless Steel Flange
Specification: ASTM / ASME B16.5, ASME N 16.47 SERIES
Size: 1/2\" To 48\" (15 NB To 1500 NB)
Type : Socket Weld, Slip On, Blind, Lapped, Screwed, Weld Neck, Long Weld Neck, Reducing, Spectable, Ring Joint Flanges
Class : 150#, 300#, 400#, 600#, 900#, 1500#, 2500#
Form : Circle, Square, Plate, Ring, Flat
Grade :
Specification: ASTM / ASME B16.5, ASME N 16.47 SERIES
Metal Aids India a accredited with AN ISO 9001: 2015, 14001: 2015, OHSAS 18001 & PED Certified Company and was established in since 2010. We take the pleasure to introduce ourselves as a largest Manufacture & Exporter of all type of industries products like Flange, Forging Flange, Component Flanges, Precision Different Component Flanges in different shape & size (as per client drawing & specification) etc in CNC Lathe & Milling Machine (VMC)
Description: Stainless Steel Flange
Specification: ASTM / ASME B16.5, ASME N 16.47 SERIES
Size: 1/2" To 48" (15 NB To 1500 NB)
Type : Socket Weld, Slip On, Blind, Lapped, Screwed, Weld Neck, Long Weld Neck, Reducing, Spectable, Ring Joint Flanges
Class : 150#, 300#, 400#, 600#, 900#, 1500#, 2500#
Form : Circle, Square, Plate, Ring, Flat
Grade :
Specification: ASTM / ASME B16.5, ASME N 16.47 SERIES
Our Ring Joint Flanges are designed in compliance with international quality standards. These are widely acknowledged for high strength, durability, reliability, corrosion resistance and close tolerance levels. Our ring joint flanges find varied application in chemical, engineering and construction industries. We also specialize in customizing our range as per the specific requirements of customers.
