Specifications: Appearance white granule Particle size 2-4mm Purity 99% min Nitrogen 15.5% min Nitrate Nitrogen 14.1%-14.4% Ammoniacal Nitrogen 1.1%-1.3% Calcium 19% min Moisture 0.8% max Water insoluble matter 0.2% max Nitric 0.05% max Iron 0.005% max PH 5.6-6.8
Appearance white granule Particle size 2-4mm Purity 99% min Nitrogen 15.5% min Nitrate Nitrogen 14.1%-14.4% Ammoniacal Nitrogen 1.1%-1.3% Calcium 19% min Moisture 0.8% max Water insoluble matter 0.2% max Nitric 0.05% max Iron 0.005% max PH 5.6-6.8
Commodity: Ammonium nitrate porous prills Molecular formula: NH4NO3 Molecule Weight: 80 CAS: 6484-52-2 UN:1942 Hazardous class:5.1 Commodity: Ammonium nitrate porous prills 1.Production of granular porous ammonium nitrate for industrial use and agricultural granular ammonium nitrate. Products with low moisture content, not easy to cake; high compressive strength, not easy to break; high oil absorption rate. Ammonium nitrate content is more than 99%, the appearance is white granular crystals, no impurities visible to the naked eye. 2. Purpose: Explosive material: granular ammonium oil explosive is made by mixing porous ammonium nitrate with raw oil. Its speed can reach more than 3 200 m/s. This explosive has strong explosive power, safe and reliable use, low price, cost saving, and can usually reduce the cost by 20%-40%. At present, this kind of explosive has been widely used in mining, construction, railway and highway construction, agricultural and water conservancy construction and national defense and other fields. 3. Product specifications: Specifications: Appearance white granule Particle size 0.5-2.5mm NH4NO3 >99.5% N >34% Oil absorption > 8% Moisture < 0.2% PH >4
Product Brief Introduction: with the largest consumption for construction and building materials. It is mainly used as enamel fluxing agent, glass opalizing agent, acid-proof clay, acid-proof concrete coagulator and wood preservative. It can also be used for insecticide. Product Hazard or Harmful Ingredients:It does not combust or explode but has corrosivity and certain toxicity. Product Physical Properties:The product is white powder crystals and basically neutral. It is difficult to dissolve in water and acid and the density is 2.37g/cm3. Product Chemical Properties:It is stable under normal temperature. It does not combust nor explode when it is heated or contacts with redox materials. Spillage Treatment Method:Simple cleaning and burying Protection Measures for Product Transport & Storage:To prevent from caking and going bad, it should be kept indoor or be covered with protection materials like canvas and free from the blazing sun. Packing :Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg/1200kg. Other Information: Anti-caking agent can be added at the request of customers. Technical Specifications Analysis items Standard Na2SiF6 99% min Loss of weight on drying at 105â?? 0.3% max Free acid (as HCl) 0.1% max Chloride (as Cl) 0.1% max Sulphate (SO4) 0.3% max Iron(Fe) 0.02% max Water-insoluble matter 0.5% max Particle size distribution Passing through 40 mesh sieve 98% min Passing through 60 mesh sieve 90% min Passing through 325 mesh sieve 25% max
[Technical Indicators] 1. Industrial grade Indicator Name/Indicator Value Powdered Products (F) Needle Products (Z) Level 92 Level 93 Level 95 Level 92 Level 95 Appearance White or light yellow powder, without caking White or yellowish needle-like, without lumps Active matter,% 92.0 93.0 95.0 92.0 95.0 Free oil,% 1.2 1.2 1.2 2.0 1.5 Inorganic salt,% Sodium sulfate 5.8 4.8 2.5 4.8 2.5 Sodium chloride 0.15 0.15 0.15 0.15 0.15 Moisture,% 2.0 2.0 2.0 4.0 3.0 PH value (1% aqueous solution) 7.5-9.5 7.5-10 Whiteness (WB), 90 2. Toothpaste grade Indicator Name/Indicator Value Toothpaste Grade (Y) (I) Level (II) Level (III) Level Appearance White or yellowish powdery or needle-like, without caking Active matter,% 95.0 93.0 93.0 Free oil,% 1.2 1.2 1.2 Inorganic salt,% Sodium sulfate 2.5 3.2 4.0 Sodium chloride 0.15 0.15 0.15 Moisture,% 2.0 2.0 3.0 PH value (1% aqueous solution) 8-9.3 8-9.3 8-10 Whiteness (WB), 90 Foaming capacity/mm 180 Heavy metal (as Pb)/ (mg/Kg), 15 Arsenic content (as As)/ (mg/Kg), 3 Total bacterial count/ (CFU/G), 100 Total number of molds and yeasts/ (CFU/G), 100 Fecal coliforms/G Not to be detected Pseudomonas aeruginosa/G Not to be detected Staphylococcus aureus/G Not to be detected  3. Latex grade Indicator Name/Indicator Value Latex grade (powder, needle, liquid) Aggregate grade Seed level Liquid K12 Appearance White or yellowish powdery or needle-like, without caking Light yellow transparent liquid Active matter,% 94.0 92 28.5-30.5 Free oil,% 0.8-1.0 1.5-2.0 1.5 Inorganic salt,% Sodium sulfate 3.0 3.0 1.5 Sodium chloride 0.15 0.15 0.05 Moisture,% 3.5 3.5 - PH value (1% aqueous solution) 8-10 7.5-9.5 Whiteness (WB), 90 - Color Klett (30% active), - 60 4. Reagent grade Indicator Name/Indicator Value Reagent grade Level 99% Level 97% Appearance White flaky crystals White powder Solubility (1%, alcohol) Completely dissolved Solubility (10%, aqueous solution) Completely dissolved Chroma APHA (20%, deionized water), 15  - Active matter (%), â?¥ 99 (on dry basis) 97 Petroleum ether soluble matter (%), 0.2 1.0 Sodium sulfate (%), 0.5 1.5 Sodium chloride (%), Moisture (%), 1.0 2.0 PH value (1% aqueous solution) 6.0-8.0 6.0-11 Phosphate, 1ppm - Lead (Pb), 2ppm Iron (Fe), 1ppm Nitrogen, 5ppm - Arsenic (As), 0.1ppm Fraction content (%), 99.0 Absorbance (3%, deionized water) 230nm 0.4 260nm 0.1 280nm 0.1 - 410nm 0.01
English name: Calcium Nitrite Molecular formula: Ca(NO2)2 Molecular weight: 132 CAS NO. 13780-06-8 HS CODE: 28341000 UN NO.: 2627 5.1 type oxidizing agent Properties: White powder without crystal water. It is tasteless and toxic. Easily in water and presents light yellow solution. Specifications: Item Superior grade First grade Second grade Calcium Nitrite[Ca(NO2)2 as dry basis]% 94 92 90 Calcium Nitrate[Ca(NO3)2 as dry basis]%
1. Product Functions and Features Sodium Selenite is a supplement of selenite for animal nutrition. The product has stable quality and good liquidity and is easy to mix process. 2.  Introduction Mixed feed additives and sodium selenite. The additive of microelement selenite in feed. Usage & Dosage:The recommended amount in the compound feed(calculated by Selenite mg/kg)0.1-0.3mg for livestock,0.1-0.3mg for fishes. 3. Appearance Light Grey Powder 4. Product quality standard 1%selenite 5%  selenite Sodium selenite (counted by Se)% 1 ±0.05 5 ±0.10 Moisture % 5 Pass 450 m test sieve% 95 Total arsenic content (counted by As)% 0.0005 Lead content (counted by Pb)% 0.002 Cadmium content (counted by Cd)% 0.001 5.Packing:25kg/bag 6. Storage conditions, methods and precautions: stored in cool and dry places, and used up as soon as possible once unpacked.
Chemical name:Magnesium nitrate Molecular formula:Mg(NO3)2.6H2O Molecular weight:256.40 Property:soluble in water,liquid ammonia, methanol and ethanol.Stable at room temperature, the relative density of 1.461, higher than the melting point of 95�°C off the water to generate alkaline magnesium nitrate, heated to 300�°C begins to decompose above 400�°C to completely decompose into magnesium oxide and Nitrogen oxide gas. Quality standard: Item Indicator Industrial grade Agriculture grade Magnesium nitrate (Mg(NO3)2.6H2O) â?¥98.0% â?¥98.0% PH value â?¥4 --- Heavy metal â?¤0.002 --- Water insoluble â?¤0.05% â?¤0.1% Iron â?¤0.001% --- Magnesium oxide content(CaO) --- â?¥15% Nitrogen content(N) --- â?¥10.7% Use:Concentrated nitric acid for industrial de-water agent, manufacture of explosives, catalysts and other magnesium salts and nitrates catalyst raw materials, wheat ashing agent.Used in agriculture, magnesium soluble fertilizer for soilless culture. Packing:25/50KGlined with plastic bag and exterior is woven bagPacking or according to customers requirements. 1.Purity 98% white granule 2.Used for fertilizer or industrial material 3.Export Asia/Europe 4.ISO9001
Product Name: Ferrous Sulphate Heptahydrate Molecular Formula: FeSO4. 7H2O CAS No.: 7782-63-0 Mol Weight: 278.05 Usage and Dosage: 1. Industrially: ferrous sulphate heptahydrate is mainly used as a precursor to other iron compounds. It is a reducing agent, for the reduction of chromate in cement. 2. Nutritional Supplement: Together with other iron compounds, ferrous sulphate is used to fortify foods and treat iron-deficiency anemia. Constipation is a frequent and uncomfortable side effect associated with the administration of oral supplements. Stool softeners often are prescribed to prevent constipation. 3. Colorant: Ferrous sulphate can also be used to stain concete and some limestones and sandstones a yellowish rust color. 4. Water Treatment: Ferrous sulphate has been applied for the purification of water by flocculation and for phosphate removal in municipal and industrial sewage treatment plants to prevent eutrophication of surface water bodies. Storage: Storage Store in cool, dry, well ventilated area, removed from oxidising agents (eg. hypochlorites), acids, metals and foodstuffs. Ensure containers are adequately labelled, protected from physical damage and sealed when not in use. Large storage areas should have appropriate ventilation systems. Precaution: Flammability Non flammable. No fire or explosion hazard exists. Packing: Net weight 25kgs, 50kgs per each plastic woven bag Technical Specification Appearance: Light green crystalline powder Fe 19.7%min Pb 20 ppm max As2 ppm max Cd 5 ppm max Size Crystalline Powder
1. Product name: Ammonium bisulfite solution 2. Molecular formula: NH4HSO3 3. Molecular weight: 99.10 4. Physical and chemical properties: light yellow liquid, with a little sulfur dioxide odor. Relative density (70%) : 1.4. 5. Technical index: Item Photographic grade Appearance clear light yellow liquid Content w/w % 68-72 pH value (stock solution 20C) 4.0-6.0 Iron (Fe) w/w % 0.001 6. Packing: 270kg plastic drum, 1.25MTS/IBC 7. Uses: in synthesizing dye intermediate, surfactant, herbicide, reducing agent in pharmaceutical industry, etc.
