Supplier: All kinds of tools, 18v automatic rebar tying machine, 14v automatic rebar tying machine, 9v automatic rebar tying machine
Supplier: Rebar tier, rebar tying machine, rebar tier wire (coil), zinc steel wire
1. WL-400B Automatic Cordless Rebar Tying Machine can do one hand operation, rebar bar could be tried quickly and safety 2. Simple and easy operation, work automatically 3. Powered by the rechargeable battery. 4. Tying could be completed by putting the jaw onto the crossed-rebar and pulling the trigger only. 5. Carrying plastic case supplied well protection.
Overview Specifications Place of Origin: Shandong, China (Mainland) Brand Name: Dingcheng Model Number: DC-6 Voltage: 10.8v Battery: Lithium ion battery rebar range: 6-46mm steel wire diameter: 0.8mm Charge time: fast charge 40min, slow charge 1.5h Each charge can tie times: 1000 times Tie one time required: 1s Packaging & Delivery Packaging Details: standard exporting package. Product Description Rebar tier Introduction: Automatic Rebar Tying Machine/ Rebar tier, is a handheld, battery type steel rebar tying machine. It is an intelligent tool, built-in microcontroller, steel strapping can automatically complete all of the steps can be widely used in construction field, to replace the manual tying rebar. Steel strapping is mainly composed of the body, special coil, battery case, charger of four parts. 1. Simple, one-handed operation to improve the safety factor of workers to operate. 2. Tying the tying fast speed is 3-4 times of manual operation, each knot tying time is one second, greatly reducing the labor intensity of workers. 3. Light weight, compact machine, easy to operate. 4. Strong lithium battery, charging time 70-80 minutes per charge can be continuously 1300-1500 knot tying, make the machine easy to carry to work. Rebar tying machine parameters: Voltage: 10.8v Battery type: Lithium-ion battery For steel strapping range: 6-24mm 8-34mm 8-46mm Iron plate wire diameter: 0.8mm Iron plate wire length: 110mm above Charging time: fast charge 40min, slow charge 1.5h Each charge can tie times: 1000 times Tie one time required: 1S Dimensions: 270 * 65 * 195mm After weight Packages: 9kg
Overview Specifications Place of Origin: Shandong, China (Mainland) Brand Name: Dingcheng Model Number: DC-6 Voltage: 10.8v Battery: Lithium ion battery rebar range: 6-46mm steel wire diameter: 0.8mm Charge time: fast charge 40min, slow charge 1.5h Each charge can tie times: 1000 times Tie one time required: 1s Packaging & Delivery Packaging Details: standard exporting package. Product Description Rebar tier Introduction: Automatic Rebar Tying Machine/ Rebar tier, is a handheld, battery type steel rebar tying machine. It is an intelligent tool, built-in microcontroller, steel strapping can automatically complete all of the steps can be widely used in construction field, to replace the manual tying rebar. Steel strapping is mainly composed of the body, special coil, battery case, charger of four parts. 1. Simple, one-handed operation to improve the safety factor of workers to operate. 2. Tying the tying fast speed is 3-4 times of manual operation, each knot tying time is one second, greatly reducing the labor intensity of workers. 3. Light weight, compact machine, easy to operate. 4. Strong lithium battery, charging time 70-80 minutes per charge can be continuously 1300-1500 knot tying, make the machine easy to carry to work. Rebar tying machine parameters: Voltage: 10.8v Battery type: Lithium-ion battery For steel strapping range: 6-24mm 8-34mm 8-46mm Iron plate wire diameter: 0.8mm Iron plate wire length: 110mm above Charging time: fast charge 40min, slow charge 1.5h Each charge can tie times: 1000 times Tie one time required: 1S Dimensions: 270 * 65 * 195mm After weight Packages: 9kg Salemanager:SalleyWang Companyï¼?JingNing DingCheng industrial mining equipment co., ltd
The pellets are used in the production of steel, which is used in the construction of bridges, cars, planes, bicycles, household appliances and much more. But, before this, the ore goes through a blast furnace that only works when air can circulate freely. For this reason, the material needs to be big enough so that there are spaces between each piece. On top of this, the ore needs to be strong enough not to be crushed thereby obstructing the blast furnace. Thus, the production of pellets is fundamental to the steel production process
We are well-known manufacturer, supplier and exporter of FXG-200 Electric Sausage Tying Machine in Guangdong, Guangdong, China. This machine uses the micro computer control technique which research and development independently. It works smoothly and fluently. This machine is light in weight, small in size and low in noise. It is suitable for working conditions which were not in the factory. We paid much attention to the safety of the operator. During operating this machine, we can see that the personnel safety was put to the first place.10~20% of the casings can be saved. The cost of casings for each ton of the products can be reduced by RMB 200 to 800 Yuan, varied with the specifications of the products. Parameters Dimension: 790x410x460mm Voltage: 220V Capacity: 100pcs/min Net weight: 48KG Sausage Diameter: 8-35mm Sausage Length Range: 3-26mm(adjustable) Supplier Product Code : FXG-200 Video Link: http://v.youku.com/v_show/id_XMTY3MDYwODY2OA==.html
china coal 0001 Features of XTGWH20/32 Rebar Bending Machine 1.Adopt double drive wheel transmission structure, one time molding. 2.Easy to operate and use, Accurate arc and high efficiency. 3.Working wheels adopt high tough material, hard and durable. 4.Transmission gears adopt high tough material and have a long service life. Parameter of XTGWH20/32 Rebar Bending Machine Range of production 20mm-32mm diameter steel bar Motor power 3 KW Rated voltage 380V 50HZ Min.diameter of bending 350 mm Max.diameter of bending Unlimited Speed of bending 20 m/min
Production: GQ40 /GQ50 rebar cutting machine is an ideal equipment for steel bar cutting. It can be applied to cut the normal carbon steel rod, hot rolled steel and deformed bar in machine processing and construction projects, also suit for square steel and flat steel. Main Features: 1.Enhanced machine rack, small volume, compact structure, solid and reliable. 2.Good lubricating property, adopt anclosed gear box, use the gear splashing to realize lubrication. It could be continuous work two months after adding 8kg gear oil. 3.Less function loss because of the lubrication improvement. The gear section adopts rolling bearing, less resistance. Compared with same type cutting machine, load power can be reduced by one third. 4.Using high rigid cutting head, connecting rod and high speed national standard motor, guaranteed a more stable quality and longer service life. 5.It's convenient to be moved and maintenance.
