Kinetik rat bait station Rat bait stations are used to protect rodenticide from moisture and dirt. There are two compartments inside to place bait. Where to use it: in and around businesses and homes away from pets and children. Rate of application: depends on infestation or level Of maintenance wanted. Generally one every 10-15 feet is required. 30 pcs in 1 Cartoon Box
Product feature 1. The high pressure of the pump makes it possible to use spraying nozzles that have relatively large bores so that even wettable powder spraying mixtures can be appiled without any problems. 2. All the parts get in contact with chemicals are made form anticorrosive materical. 3. Equip with an adjustable output of 0-36l per hour, could adjust the flow rate to supplying for ultra-low-volume or low-volume spraying, this versatile gives you the power to handle both large and small areas, wherever the ulv aerosol generator is needed. 4. Equip with a flexible with handle on nozzle permits spraying into normally inaccessible and hard to reach aeras such as under/between kitchen cabinets, under carpets and above ceilings. 5. Large-caliber solution tank cover, easy to add chemical solution. 6. 6l solution tank, large volume solution tank, could load more chemical solution. Product specification/models 1. Electrial motor: 800w 220vac/50hz 2. Fogging nozzle: four counter-rotating vortex nozzles 3. Partical size: 5-50 micro vmd, adjustable. 4. Liquid flow rate in l/h: 0-36 adjustable 5. Tank capacity in l: 6 6. Dimensions in mm(lxwxh): 450x220x300 7. Weight in kg, empty: 4.2 8. Dimensions in mm(lxwxh)(shipping data): 445x230x360 9. Weight in kg, empty(shipping data): 5.2
Technical specification Combustion chamber outputú¦ 11.6KW Fuel consumptionú¦ 1.5L/H Solution outputú¦ 8-42L/H Fuel tank capacityú¦ 1.2L Solution tank capacityú¦ 6L weight(empty) 8.5kg Power supplyú¦ DC6V(4x1.5V) L*H*W: 125*29*35(cm)
Product feature 1. We produce this product in our high quality standard using only high materials, i.E. Stainless steel. 2. Its working performance is very reiable, you could spary at any angle, the engine will not flameout. 3. High-work-efficiency, economical, the penetration and clinging of the fog is well. 4. Most light in weight, it is easy to operation and maintenace. Product specification/models 1. Weight, empty in kg. Approx: 7.9 2. Deminsions in mm(lxmxh): 1440x270x315 3. Weight, empty in kg. Approx(shipping data): 11.6 4. Deminsions in mm(lxmxh(shipping data): 1288x310x360 5. Solution tank capacity in l: 5 6. Fuel tank capacity in l: 1.5 7. Fuel consumption in l/h, approx: 1.5 8. Performance of combustion chamber in kw/hp: 11.6/15.8 9. Maxinium flow rate in l/h: 42 10. Flow rate of oil in l/h, approx: 8~42 11. Energy: 2x1.5v batteries 12. Pressure in the solution tank in bar, approx: 0.25 13. Pressure in the oil tank in bar, approx: 0.06
Product feature 1. Excellent conformation, working performance is very reliable. 2. Low noise, ease of operation and maintenance, starting up immediately. 3. Fogging tube adopts two-stages cooling system, lower the temperature of the fogging tube and combustion chamber, ensure the unit will have a longer lifespan. 4. Adopts the automatic ignition system, ease of start up the unit. 5. The adjusting knob of oil nozzle has scalar, ease of operation. 6. Adopts anti-slide solution cap, ensure it is safe to the operator. 7. The fuel consume is low, it is up to 1 l/h. Product specification/models 1. Weight, empty in kg. Approx: 7.5 2. Deminsions in mm(lxmxh): 1330x290x315 3. Weight, empty in kg. Approx(shipping data): 11.5 4. Deminsions in mm(lxmxh)(shipping data): 1288x310x320 5. Solution tank capacity in l: 5 6. Fuel tank capacity in l: 1.5 7. Fuel consumption in l/h, approx: 1 8. Performance of combustion chamber in kw/hp: 11.6/15.7 9. Maxinium flow rate in l/h: 10 10. Flow rate of oil in l/h, approx: 10 11. Energy: 2x1.5v batteries 12. Pressure in the solution tank in bar, approx: 0.25 13. Pressure in the oil tank in bar, approx: 0.06
Product Feature The TS-36P utilizes high-power pulse-jet engine to producing a high output of dense heavy thremal fog for control of virus or flying insects such as mosquito, gnats, house flies, sand flies and black flies. 1. It can be disassembled withour extra instrument, it's easier of maintenace. 2. Fogging tube is eqipped with two-stage cooling system. This technology will greatly lower the temperature of the fogging tube and combustion chamber. 3. High-work-efficiency, economical, the penetration and clinging of the fog is well. 4. Most light in weight and with compact dimensions,it is easy of opearation. 5. Adopting refactory stainless steel to making the fogging tube, it will maintain its natural color and sharp in the whole years of its lifespan. 6. Equipped with 4x1.5 dry battery power supply to assure greater reliability. 7. Equipped with automic ignition system to assure ease of start-up the engine. 8. The adjusting knob of the oil nozzle has scalar, ease of operation. 9. could choose the auto-cut solution valve. In case of engine flameout, ensure it is safe to operator. 10. could choose the automatic ignition system of the air-pump, you only need to push down the start button, the machine will start-up immediately. Product Specification/Models 1. weight, empty in kg. approx: 8.1 2. deminsions in mm(LxMxH): 1375x290x360 3. weight, empty in kg. approx(shipping data): 13.1 4. deminsions in mm(LxMxH)(shipping data): 1270x310x370 5. solution tank capacity in L: 7 6. fuel tank capacity in L: 1.5 7. fuel consumption in L/H, approx: 1.5 8. performance of combustion chamber in KW/HP: 18.5/25.15 9. maxinium flow rate in L/H: 42 10. flow rate of oil in L/H, approx: 8~42 11. energy: 4x1.5V batteries 12. pressure in the solution tank in bar, approx: 0.25 13. pressure in the oil tank in bar, approx: 0.06
Product feature: 1. Producing nearly invisible small droplet, better penetration, quick infusibility. 2. Producing 90% of droplets are less than 15 micron in diameter, these small droplets will float in the air for a longer time before it subside to the ground, so this small droplet of chemical solution have a lasting effect for flying insects or virus in the air. 3. Adopting chemical resistant polyethylene to making solution tank, could dispense both oil based or water based chemical solution. 4. Rugged design handles corrosive liquids and heavy impacts. 5. It is ideal for increasing humidity and dispensing sanitizers, the durable plastic body is made from rugged chemical resistant polyethylene for years of trouble free operation. Both oil based and water based solution can misted through the non-clog nozzle. 6. Equipped with a precision regulating valve with scalar in the nozzle head to adjusting the flow rate, in order to get the desired size of droplets. 7. Solution tank is marked with capacity scale, so it is helpful when you add precise volume of solution. 8. Most light in weight, equipped with fabric strap, its length is adjustable, ease of operation. 9. With an adjustable output of 0-24l per hour, could adjust the flow rate to applying for ultra-low-volume or low volume spraying, this versatile unit gives you the power to handle both large and small area, wherever the ulv aerosol generator is needed. Product specification/models 1. Electrical motor: 800w 220vac/50hz 2. Fogging nozzle: four counter-rotating vortex nozzles 3. Chemicals: handles both oil and water based chemical solution. 4. Liquid flow rate in l/h: 0-24 adjustable 5. Tank capacity in l: 6 6. Dimensions in mm(lxwxh): 420x200x290 7. Weight in kg, empty: 3.1 8. Dimensions in mm(lxwxh)(shipping data): 445x230x360 9. Weight in kg, empty shipping data): 4.1
Supplier: Pest control equipment
Services: Pest control
Buyer: Pest control equipment
3F technoogy company starts business from 2007 and estabish a production center around ningbo , zhejiang. create idea and deveop products for pest contro and air purifier according customer requirements. We are the manufacturer of utrasonic pest repeer. , commit to top quaity , drive for continuous invention and provide the unique ife products for you. are an eco-friendy company, a the materia compy with ce requirements . The products are designed and produced in a way , which minimize the consumption of natura resource pay great attention to the empoyee training. A the engineers and works shoud be trained two weeks before they starts the job. A the products are designed and produced by our empoyee. We focus on the design and produce utrasonic pest contro and air purifier products. When it comes to customer's satisfaction, we aways the word eader. We are the market eader in pest contro fied , and we keep deveoping new products for our customers. We aso provide OEM, ODM service according customer requirements.
3F technology company starts business from 2007 and establish a production center around ningbo , zhejiang. create idea and develop products for pest controand air purifier according customer requirements. We are the manufacturer of ultrasonic pest repeller. L, commit to top quality , drive for continuous invention and provide the unique life products for you. are an eco-friendly company, althe materiacomply with ce requirements . The products are designed and produced in a way , which minimize the consumption of naturaresource pay great attention to the employee training. Althe engineers and works should be trained two weeks before they starts the job. Althe products are designed and produced by our employee. We focus on the design and produce ultrasonic pest controand air purifier products. When it comes to customer's satisfaction, we always the world leader. We are the market leader in pest controfield , and we keep developing new products for our customers. We also provide oem, odm service according customer requirements.
