GPS Tracking for Android4.22 GPS GSM GPRS Module Fleet Management Solution Feature: Vehicle financing Vehicle maintenance Vehicle telematics (tracking and diagnostics) Driver management Speed management Fuel management Safety management Specification: LCD: 7" with touch panel, 800*480. ARM: Allwinner A20 Nand Flash: 4G Byte DDR3 Memory: 1GB Wifi module: RTL8723AS VAU GPS module: GB1612 Wireless communication GSM module: UC15 Built-in speaker: 2W 8ohm, Size:40mm Support SIM Card Support SD Card and TF Card: 128M-32GB Built-in GPS Antenna and GSM Antenna; Optional external GPS Antenna Built-in Battery: Polymer Li-Ion Battery 3.7V@1200mAH Support UART: * 2 Support RS485: * 1 Support CVBS input: * 4 Support External Key Support USB2.0(host): * 2 Support USB2.0(Device): * 1 Support output : * 1 Support input : * 3 Operating System(OS): Android 4.22 Accessories: * Extended cable * Touch pen * Operation manual * Bracket * SD card(optional) Size: 20*12*2cm Weight: 1.5KG
This is an easy to use system for maximizing' vehicle fleet management through the GPS tracking technology. The (AVL) automatic vehicle locator system works as a fleet manager when interfaced with a web map you can locate your vehicles live and watch where they go. This system can remotely locate all your vehicles, anywhere all over the country, and you can monitor your field operatives and manage them from the confines of your office on your computer. CT01 provides an easy way to track your vehicle and provides peace of mind by showing you with your mobile phone or PC the location of your vehicle via SMS or GPRS. CT01 has the following features: Vehicle Tracking and Management Accurate GPS Satellite Positioning SOS Emergency Button Speeding Alarm SMS Support on any GSM network Support GPRS Tracking.
New features in gms-d1: Ultra-small form factor, 13 x 10 x 2.1 mm Ultra-high sensitivity, -165dbm L1 frequency, c/a code, 66-channels satellite searching Agps support for fast positioning (offline mode: epi valid up to 14 days) Dgps (waas/egnos/masa/gagan) support Multi-path detection and compensation E-gsm-900 band rejection E911 compliance Usb interface support High update rate, up to 10 hz Magnetic variation function support Low power consumption, low shut-down current consumption Rohs compliant.
YIC5 series GPS/QZSS + GLONASS modules - MediaTek chip solution YIC3 series GPS/QZSS + GLONASS modules - GOKE chip solution YIC9 series GPS/QZSS + GLONASS modules - ublox chip solution YIC7 series Ultra Low Power L1 GPS/QZSS + GLONASS modules YIC5 series Ultra Low Power Sub-1 Meter L1 + L5 GNSS modules YIC5 series L1+L5 NavIC(IRNSS) GNSS modules YIC5 series L1+L5 Dead Reckoning GNSS modules YIC5 series GPS/QZSS + BeiDou modules - MediaTek chip solution YIC9 series GPS/QZSS + BeiDou modules - ublox chip solution YIC5 series GPS/QZSS modules - MediaTek chip solution YIC9 series GPS/QZSS modules - ublox chip solution
The GlobalTop Technology FGPMMOPA1 is one of the advanced GPS receiver module available with a finely tuned, high-sensitivity Patch on Top (POT) ceramic antenna utilizing SmartAntenna Structure. This POT GPS module is an ideal solution for those who wish to incorporate GPS functions into their own design without worrying about RF noise interference or any additional antenna fine tuning adjustment. It excels in tracking performances under urban landscapes or other environments where GPS signals can be difficult to acquire. FGPMMOPA1íªs design is powered by MediaTek Inc. (MTK) 32 channels chipset, the leading digital fabless semiconductor company for wireless communications and digital media solutions. This GPS module engine board has a very cost-effective design with excellent tracking performances, and ease of integrations; it is ideal for use in fleet-tracking device and those who wishes to plug-and-play GPS receiver module into their design! Feature: -Based on MediaTek Inc. Architecture -TCXO Design -Sensitivity: -158 dBm Tracking -L1 frequency, C/A code, 32-channels -Position Accuracy:
The GlobalTop Technology FGPMMOPA2 is an advanced GPS receiver module based on MT3318 single chip solutions, available with finely tuned, high-sensitivity Patch on Top (POT) ceramic antenna utilizing SmartAntenna Structure. This POT GPS module is an ideal solution for those who wish to incorporate GPS functions into their own design without worrying about RF noise interference or any additional antenna fine tuning adjustment. It excels in tracking performances under urban landscapes or other environments where GPS signals can be difficult to acquire. FGPMMOPA2íªs design is powered by MediaTek Inc. (MTK) 51 channels chipset, the leading digital fabless semiconductor company for wireless communications and digital media solutions. This GPS module engine board has a compact, cost-effective design with excellent tracking performances, and ease of integrations; it is ideal for use in fleet-tracking device, PND and those who wishes to plug-and-play GPS receiver module into their design! Feature: -Based on MediaTek Inc. MT3318 Solution -TCXO Design -Sensitivity: -158 dBm Tracking -L1 frequency, C/A code, 51-channels -Position Accuracy:
Our most successful ultra small gps module with integrated patch antenna just got even better. For starters, parts of circuitry are tweaked and tightened for performance and characteristic enhancement. Then, a new patch antenna is finely-tuned and utilized, chosen solely for its ability to take the overall gps signal reception to the next level. This deadly combination provides a stunning sensitivity improvement across the board. Pa6b is completely pin-to-pin compatible with its predecessor pa6, offering not only the same ease of integration and small footprints, but also utilizing the latest gps chipset mt3329 from mediatek. You can instantly upgrade your pa6 based gps device by replacing them with pa6b. New features: Significant gps reception/sensitivity improvement Support up to 210 prn channels Jammer detections and reduction Multi path detection and compensation Pin to pin compatible with fgpmmopa6. Specification -mediatek inc. Mt3329 -super small size: 16 x 16 x 6 mm -tcxo design -sensitivity: -165 dbm tracking -l1 frequency, c/a code, 66-channels -position accuracy:
Globaltop pa6e GPS module offers the best of both worlds in terms of antenna support! It comes standardly equipped with pre-tuned ceramic patch antenna for easy integration, but in addition, it has an additional i/o interface for external antenna with short circuit protection. Also, pa6e has the ability to automatically switch between internal patch antenna and external gps antenna upon detection. The unique combination of a small foot print gps module with integrated antenna made pa6 family one of the most important corner stone in globaltop technologyíªs product line up and its popularity soaring among the gps designer community. Pa6 family is based on the latest mediatek gps chipset, mt3329, featuring unparalleled performance in sensitivity and functionality, and comes with assortment of firmware customization features offered directly by globaltop: including "gtop binary protocol", "one sentence customization", "power periodic mode" and "agps, dgps support" New features in fgpmmopa6e: External antenna i/o interface External antenna short circuit protection Automatic external / internal antenna switching upon detection. Specification Mediatek mt3329 single chip solution with integrated antenna L1 frequency, c/a code, 210 prn channels Small form factor: 16 x 16 x 6 mm High sensitivity: up to -165 dbm tracking, tcxo design Multi-path compensation, e-gsm-900 band rejection Dgps, agps support Low power consumption: 37 ma tracking (typical) 10hz update rate Nmea, pmtk protocol support 1 x uart (ttl) port Fcc911, ROHS compliance.
Ct-G353 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -159 dBm52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes position power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Hardware and Software - Based on the high performance features of the SiRFstarV low power single core logic. - Adaptive micropower controller - Only 50 to 500A maintains hot start capability (core logic) - < 10mW required for TricklePower mode - RoHS compliant (lead-free) - Advanced navigation features - Smart sensor supported by IC interface - External interrupt input for context change detection - Dimension : 20 x 20 x 7 ± 0.5mm Advantages - Built-in LNA. - Built-in internal ROM and based on Firmware 5.5.X - It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc. - Maintain tracking sensitivity as low as GPS @ -163dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) - Support SiRFaware technology - Support adaptive Micro Power Controller power management mode. - < 10mW TricklePower, so user can leave power on all day instead of power off. - Suitable for battery drive devices that need lower power consumption application Ideal for high volume mass production(Taping reel package) - Cost saving through elimination of RF and board to board digital connectors - Flexible and cost effective hardware design for different applications - Embed CGEE (Client Generated Extended Ephemeris) that can capture ephemeris data from satellites locally and predicts ephemeris up to 3 days. So if the module was off within 3 days, it could complete the positioning process with limited time just like hot start.
