We are able to supply Tin in many forms including LME registered and non registered, ingots, slabs, bars, foil, granules, powder, anodized activated powder, shot, wire, sticks, ingots, and “mossy tin”. Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline structure. The element has two colours, with a cubic structure which changes at allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This change is affected by impurities such as Aluminium and Zinc, and can be prevented by small additions of Antimony or Bismuth.
Supplier: Aluminum flat rolled products, Building sheets Closure stock, Fin stock, Hot rolled plates, Pattern sheets, Cable wrap stock, Cold rolled coils, Flooring sheets/tread plates, Lamp cap stock, PCB entry sheets/coils, Circles, Cold rolled sheets, Foil stock, Litho stock, Spiral fin stock
EPM A2, B1 & Non-FR. At EPM's purpose-built high speed production line using the most advanced technology in the industry and covering an area of more than 50,000 square meters, our multi-million dollar state-of-the-art facility has an annual capacity to produce in excess of 60 million square meters(600 Million Square Feet) of Aluminium Composite Panels using the very best raw materials from internationally renowned suppliers. EPM A2 ACP EPM's A2 Fire-Retardant ACP core consists of well-balanced combination of combustible (LDPE) and non-combustible (Mg (OH)2) in the core, will prove resistance to fire thereby delaying combustion, and declining further spread. Where an A2 SCP core should be 90% of non-combustible proportion with 10% balanced mix of LDPE and other supplements. EPM FR-B1 ACP EPM's FR-B1 is composed of a modified mineral-based core which consists of non-combustible mineral (Magnesium Hydroxide) and small quantity of low-density polyethylene with a composition of 73% of mineral plus 25% of LDPE and 2% of other additives sandwiched in two aluminum skins. EPM NON-FR ACP EPM's Non-Fire Retardant ACP core is made up of 100% LDPE, Low-density polyethylene (Linear or Recycled) which is a plastic based core, a petroleum by-product and of course 100% combustible and contribute to increase the intensity of fire propagation when they burn and changes a small fire to a big disaster. EPM ACP SPECIFICATIONS Panel Measurements Length 2440mm, 3200mm, 3600mm, up to 6000mm Panel Thickness 3mm, 4mm, 5mm, 6mm Aluminum Skin Thickness 5mm, 0.4mm, 0.3mm Weight 3mm=4.5kg/m2: 4mm=5.5kg/m2 6mm=7.3kg/m2 (Polyethylene Core) 3mm=5.8kg/m2: 4mm=7.6kg/m2 6mm=10kg/m2 (Modified Mineral Core)
Aluminum collection
We are the leading manufacturers of Aluminum Profile. The only reason we make a greenhouse structure is to cover it. We need to make sure to use the profile that does not damage the plastic and also does not allow the spring to jump out of profile. Choice of right alloys is very important when it comes to material for locking profiles. Additional Information: Total running meter per bundle is 384 running meter Cut Length per piece 4 meters Standard Packing in 96 pics in a bundle
Features It is a composite tile made by aluminum panel and mineral fiber /fiberglass panel. It completely integrates the mineral fiber/fiberglass panel tile's comprehensive anti-resistant effect with high density aluminum panel, so as to substantially improve the flatness and anti-resistant effect of the tile. After installation, with three layers design of our product, the mineral fiber/fiberglass panel and aluminum panels effectively block the air convection, so that it achieves its purpose of energy saving and heat preservation, at the same time provides good acoustic effect. Application: Shopping mall, office building, stadium, airport, factory, school, hospital, bank,hotel, conference hall , meeting room and theatres etc. Products Data: Acoustical: (NRC>0.80) Flatness, Insulation ,energy saving Friendly environment, anti-resistant Fireproof: Class A Thickness(mm): 10,15 Size(mm):600x600,600x1200,300x1200 Other sizes can be customized.
ACM thickness:2mm, 3mm, 4mm, 5mm, 6mm. Aluminum thickness:12mm, 0.15mm, 0.18mm, 0.2mm, 0.25mm, 0.3mm, 0.4mm, 0.5mm. Panel size:1220mm*2440mm (regular),1250mm*2440mm,1500mm* 5000mm. Package:suitable for the container Payment:30% prepayment by T/T before production, 70% balance by T/T before shipment, or 100% irrevocable L/C at sight. Delivery time:10-15 days from the date that we get your prepayment.
Aluminum composite panel Specifications: 1) standard size: Thickness (t) : 1 mm, 2 mm, 3 mm, 4mm, 5mm Width (w) : 1220 mm£¬1250mm Length (l) : no limitation 2) aluminum thickness: 0.3/0.4/0.5mm 3) acp total thickness: 1mm, 2mm, 3mm, 4mm, 5mm, 6mm 4) max width: 1, 600mm 6) coating (layer): pvdf, polyester, granite serials, wooden serials, shining peal serials, some special surface serials, and customer¡¯s samples available. 7) core: fire-resistant polyethylene or normal polyethylene(pe) 8) standard specifications can be altered to meet customer¡¯s specific requirements Please contact me if you are interested in our products, please contact me
Aluminum plastic composite panel Specifications: 1) standard size: 1220*2440 2) aluminum thickness: 0.026----0.5mm 3) acp total thickness: 1mm, 2mm, 3mm, 4mm, 5mm, 6mm 4) max width: 1, 600mm 5) coating (layer): pvdf, polyester, granite serials, wooden serials, shining peal serials, some special surface serials, and customers samples available. 6) core: fire-resistant polyethylene or normal polyethylene(pe) 7) standard specifications can be altered to meet customers specific requirements
