Worldspread Intl(HK) Limited

We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.

At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.

The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%


From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:

Waste code: 10 02 10

The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.

Chemical analysis of the material is available on request.

Pularin:
Foot ball shaped 60 atoms of carbon at edges is layed in pularin.Pularin atoms are arranged in ball.
Each atom is called Bucky balls and tubes are called Bucky tubes or Nano tubes.Each nano tube is 1 to 7 nm diameter i.e 1nm=50000 part of a hair sting.
where?
1)mangampet ,cuddapah dist.Ap,India.app 800 ppm(parts prer million)info given by stanford University.

Cost:
150 times costlier than gold.
10 grams pularin $23000 to $45000
also info given by Bucky-USA website.

Special uses if this becomes common:
1)Pularin coting on aeroplanes withstands from thunders ,rains ,Flashes etc.
2)Bullet proof ackets
3)curing cancer etc.

[Technical Indicators]
1. Industrial grade
Indicator Name/Indicator Value Powdered Products (F) Needle Products (Z)
Level 92 Level 93 Level 95 Level 92 Level 95
Appearance White or light yellow powder, without caking White or yellowish needle-like, without lumps
Active matter,% 92.0 93.0 95.0 92.0 95.0
Free oil,% 1.2 1.2 1.2 2.0 1.5
Inorganic salt,% Sodium sulfate 5.8 4.8 2.5 4.8 2.5
Sodium chloride 0.15 0.15 0.15 0.15 0.15
Moisture,% 2.0 2.0 2.0 4.0 3.0
PH value (1% aqueous solution) 7.5-9.5 7.5-10
Whiteness (WB), 90

2. Toothpaste grade
Indicator Name/Indicator Value Toothpaste Grade (Y)
(I) Level (II) Level (III) Level
Appearance White or yellowish powdery or needle-like, without caking
Active matter,% 95.0 93.0 93.0
Free oil,% 1.2 1.2 1.2
Inorganic salt,% Sodium sulfate 2.5 3.2 4.0
Sodium chloride 0.15 0.15 0.15
Moisture,% 2.0 2.0 3.0
PH value (1% aqueous solution) 8-9.3 8-9.3 8-10
Whiteness (WB), 90
Foaming capacity/mm 180
Heavy metal (as Pb)/ (mg/Kg), 15
Arsenic content (as As)/ (mg/Kg), 3
Total bacterial count/ (CFU/G), 100
Total number of molds and yeasts/ (CFU/G), 100
Fecal coliforms/G Not to be detected
Pseudomonas aeruginosa/G Not to be detected
Staphylococcus aureus/G Not to be detected
 
3. Latex grade
Indicator Name/Indicator Value Latex grade (powder, needle, liquid)
Aggregate grade Seed level Liquid K12
Appearance White or yellowish powdery or needle-like, without caking Light yellow transparent liquid
Active matter,% 94.0 92 28.5-30.5
Free oil,% 0.8-1.0 1.5-2.0 1.5
Inorganic salt,% Sodium sulfate 3.0 3.0 1.5
Sodium chloride 0.15 0.15 0.05
Moisture,% 3.5 3.5 -
PH value (1% aqueous solution) 8-10 7.5-9.5
Whiteness (WB), 90 -
Color Klett (30% active), - 60

4. Reagent grade
Indicator Name/Indicator Value Reagent grade
Level 99% Level 97%
Appearance White flaky crystals White powder
Solubility (1%, alcohol) Completely dissolved
Solubility (10%, aqueous solution) Completely dissolved
Chroma APHA (20%, deionized water), 15   -
Active matter (%), â?¥ 99 (on dry basis) 97
Petroleum ether soluble matter (%), 0.2 1.0
Sodium sulfate (%), 0.5 1.5
Sodium chloride (%),
Moisture (%), 1.0 2.0
PH value (1% aqueous solution) 6.0-8.0 6.0-11
Phosphate, 1ppm -
Lead (Pb), 2ppm
Iron (Fe), 1ppm
Nitrogen, 5ppm -
Arsenic (As), 0.1ppm
Fraction content (%), 99.0
Absorbance (3%, deionized water) 230nm 0.4
260nm 0.1
280nm 0.1 -
410nm 0.01

4-Hydroxybenzoic acid

Chemical Name:4-Hydroxybenzoic acid
Trade Name:p-oxybenzoic acid
Molecular Formula:C7H6O3
Molecular Weight:138.12
CAS No.:99-96-7

Properties:white odorless crystalline powder, easily soluble in hot water and alcohols, aethers and acetone,
slightly soluble in cold water and benzene, insoluble in carbon bisulfide; relative density is 1.46
Use: Can be used as antiseptic, intermediate of dyes, pharmaceuticals; as main material of liquid crystal polymers; as material of pesticide intermediate

Specification
Item Specification
Polymer Grade Technical Grade
Appearance white crystal powder white crystal powder
Purity(on dry base) % 99.6 99.0
Melting Point 214-217 212-216
Odor odorless odorless
Solubility Clear and transparent clear and transparent
Loss on Drying % 0.20 0.50
Color(Pt-Co) 10 40
Ash % 0.02 0.15
Sulfate(SO42-) 0.01 0.05
Chloride(Cl-) % 0.005 0.02
Phe% 0.01 0.10
Salicylic Acid % 0.02 0.10
4-Hydroxyisophthalic Acid(HIPA) ppm 500 /
Insolubles in Metha ppm 50 /
Potassium(K+) ppm 5 /
Sodium (Na+) ppm 5 /
Iron (Fe) ppm 5 /
Ca2++Mg2+ppm 5 /

Specifications:
Appearance white free-flowing fine granule
Granule size 90% min between 0.15-0.85mm
NaCl 99 % min
Moisture 0.09% max
Ca & Mg 0.3% max
Water insolubles 0.1% max

Name: 2-hydroxy-6-naphthoic acid
Alias: 2,6 acid; 2-naphthol-6-carboxylic acid; 6-hydroxy-2-naphthoic acid; 6-hydroxy-2-naphthoic acid
CAS NOï¼?16712-64-4
Molecular formula: c11h7o3
Molecular weight: 187.172

Product quality standard:
Appearance characte Light yellow powder
Content 99%
2-naphtholâ?¤0.10%
2,3-acidâ?¤0.10%
melting point243-245�°C
Loss on dryingâ?¤0.30%
heavy metalâ?¤20ppm

Application: used in medicine, liquid crystal, paint, etc.

Packing: 25kg / cardboard barrel, or according to customer requirements

Commodity: Caustic Soda Flakes
Caustic Soda Pearls / Bead / Prill / Granule
Caustic Soda solid
Molecular formula: NaOH
Molecule Weight: 40
H.S code: 28151100
CAS: 1310-73-2
UN number 1823
Dangerous Class 8

We use rich natural gas resources and its strategic of liquid alkali procurement, storage, transport conditions, gradually formed transportation and sale of liquid alkali, production and sales base and external processing of flake caustic, solid caustic soda, granular caustic soda, which provide ideal condition and environment for domestic and foreign trade.

Typical Specifications:

Indexes Purity NaCl Na2CO3 Fe2O3
99 99 0.15 0.9 0.003
98 98 0.15 0.5 0.002
96 96 2.8 0.85 0.005

Used as a raw material in the manufacture of soaps ,detergent, textiles and paper ,and likewise ,in water softening and treatment, drilling mud in oil field, refining petroleum products, and washing beer and soft drink bottles, in food and drug industry ,it is used as acidity regulator, alkali, and so on.

Packing :Flake/pearl:25kg/plastic woven bag with PE inner
Solid :200kg/ iron drum

Loading weight in 1 x 20fcl: 27mt

Analysis items Standard Result
Appearance Yellow Crystalline Yellow Crystalline
Purity 99% min 99.2%
NaCN 0.01% min 0.001%
Moisture 1.5% max 0.3%
Water insoluble matter 0.02% max 0.01%
Sulphate 0.3% max 0.05%

Technical Specifications
Na2SiF6 99% min
Loss of weight on drying at 105 0.3% max
Free acid (as HCl) 0.1% max
Chloride (as Cl) 0.1% max
Sulphate (SO4) 0.3% max
Iron(Fe) 0.02% max
Water-insoluble matter 0.5% max