We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Product Range Design Code ASME Section VIII, Div I, PD 5500, AD Merkblatter, PED 97/23/EC, IS 2825 or any other international standard. Capacity Upto 500 M3 ( 5,00,000 Liters water volume) Diameter Upto 6 meters Shell & Dished End Thickness Upto 100 mm or more Weight Upto 250 tons Length Upto 60 meters, with suitable field joints. Material of Construction Carbon Steel, LTCS, NACE & HIC resistant Material, Low Alloy Steel for high temperature service (SA 387 Gr 11 and Gr 22), Cladded Steel (CS with SS, Cupronickel, Aluminum Nickel Bronze, Aluminum brass, Titanium, Inconel and many more), SS (300 & 400 series), Duplex & Super Duplex stainless steel, Cupronickel, Monel , Inconel, Nickel & Nickel Alloys, Hastelloy, Titanium, Aluminum & Aluminum alloys.