1. Power Supply: AC220V¡À10V ,50Hz / AC110V¡À10V,60Hz 2. Temperature: -15 to 60 degrees 3. Humidity:
Functions and features: 1. Unique incomplete wheel transmission is adopted to make turnstiles held or unheld in zero position more accurate and reliable. 2. Running stable, little noise and no mechanical impact 3. Self-checking-power-on function, if power on,turnstile will auto get to be held. 4. Various working means can be set in the control panel menu, namely: bi-direction card reading passing, or one direction card reading passing and another passing limits, or one direction card reading passing and another free passing, etc. 5. If power off, arm will fall automatically while power on later, arm should be lift by hand. First press the arm with a little force and then lift it manually. 6. It is with RS485 connection for far control arm up and down to satisfy the special needs or fire control requirements. 7.It is with standard electrical interface to connect various kinds of readers and writers for easy integration and also computer far control and management can be realized by computer. 8. It will count the persons who have been passed through automatically and will show the number by LED directly.(LED is optional) 9. Passing direction will be shown by LED and passengers will know which direction is allowed to pass. 10. Card reading memory or card reading without memory function can be set in the control panel menu according to your request. 11. If working with software, the total-in-population can be set to satisfy special request. 12. Re-position function. After card reading, if passenger not through within the specific time, time and the limit passing time length can be set. 13. Card Mouting is avaliable. 14. Uncompleted wheel turning system is adopted for locking the turnstile in zero, and unlocking will be more reliable and accurate. 15. Optional: 1) Counter and counter display 2) Access controller or card reader. 3) Key by-pass. Wooden case.
1. Revolving Door Dimensions: 2200L x 1400W x 2300H mm 2. Door Material: 304 stainless steel 3. Drive Way: Electronical without mechanical card agency. 4. Turning Direction of the Gate Bar: A: bi-directional B: single-directional 5. Controller: using 16-bit microprocessor as a core device, able to programmed according to clients' needs. 6. Interface: Standard input, output interface, able to used for other system intefration. 7. Sigal: 1) Dry connect spot; 2) TTL signal; 3) 232 communication interface; 4) TCP / IP communication interface (selective) 8. Working Voltage: AC220í+10% 9. Power Supply: AC220í+10%; DC24V3Aí+10%; DC12V3Aí+10% 10. Working Enviornment: indoor / outdoor 11. Temperature: 0íµ~65íµ( special temperature need to be booked.) 12. Humidity: 5%~90% 13. On / Off Time: 1 second 14. Passing Speed: 25people /minute 15. Light Prompt: green light passing, red light no passing 16. Failure Status: Passing freely after power interrupt 17. Service Life: more than 300 million 18. Shell Protection: waterproof seal 19. Card Reader Installation: 2 20. Installation and Maintenance Position: 1 21. Protective Devices: external infrared protection grating Wooden Box
Features: The arm will drop automatically while the power cut off. Direction of through is adjustable, one-way, bi-direction. RFID access controller for standard, fingerprint reader, facial identify reader, bar code reader, consume system optionally. Optional audio prompt while gate open, support voice record inside by customer Option IR detector, support people counting, prevent follower, wrong way alarm function Option temperature controller, support machine working fine in cold weather. Option Bluetooth remote controller, support remote open.
Turnstile, tripod turnstile, waist high turnstile, optical fast lane turnstile Product feature 1 Size: 1200mm(l)*280mm(w)*960mm(h) 2 Arm length: 500mm 3 power:ac220v input, driven by dc24v 500ma safe current 4 Working temperature: -20-60 5 Working humidity: 100 ms, driven current>10 ma 7 Passing speed: 30-40 person/minute 8 Communication: tcp/ip, rs485/232 optional, distance in rs485< 1200m 9 Led high light of direction indication 10 Reader interface: wiegrand 26/34/66, rs 485/232, support many mode, magnetic, em id, mifare one ic, ti, barcode, rf id and etc. 11 Noise:
1. Driving Mode for Gate Bar: 2. Turning Direction of Gate: single-directional; bi-directional 3. Mechanism Driving Mode: direct-current motor 4. Driving Mode of Gate Bar: automatic rotation; manual rotation; rotating 10degree manully then turn automatically 5. External Devices: able to external connection of IC, ID, barcode and other reading and writing devices 6. Protection: able to turn if the external force is over the setting point, the tripod will be moved, then resetting automatically 7. Anti-reversal Function 8. Temperature: 0degree celsius~60degree celsius 9. Humidity: 5%~95% 10. Speed: >15people /minute 11. Noise: less than 50dB 12. Channel Width: 550~570mm 13. Working Environment: indoor,outdoor(need rain-proof frame) 14. Overhaul Manholes: two 15. Service Life: 3million continuous switching 16. Power Consumption: 60W. Woodenbox.
Full height turnstiles Speed gates / Flap barriers Waist height turnstiles Tripod turnstiles Optical turnstiles Access control
Electromechanical tripod turnstile IP 54 rated product High performance mechanism Micro processor based logic control board 100% duty cycle
Aneiz T10 Tripod turnstile-Support OEM and ODM. Support third-party biometric devices, such as fingerprint scanner, face recognition camera. RFID card reader, QR code scanner. Aneiz T10 Tripod turnstile is a high performance pedestrian control turnstile. Usually used in high pedestrian traffic flow in both directions to control pedestrian entry or exit in restricted areas 304 Stainless steel material, durable, high quality, for long lasting use. The T10 features designed with standard relay signal, which can integrate easily to any kind of access control and fire systems through I/O (dry contact). In case of emergency, when power goes off both directions are free. Passing Direction: Single directional / Bi-directional. FEATURES Aneiz T10 Tripod turnstile -Compatible with any access control systems. Aneiz T10 Tripod turnstile -304 Stainless steel material, durable, high quality, for long lasting use. Aneiz T10 Tripod turnstile - Reset automatically: the gate arm will lock if not passing at preset time (5 seconds), the time can be adjusted by software. Aneiz T10 Tripod turnstile - Rapid throughput, 35 to 40 people per minute. Aneiz T10 Tripod turnstile - Passing direction: single directional / bi-directional, both the two directions can be switched or set as free mode. LED indicator on the top displays the status of passing. Aneiz T10 Tripod turnstile -Multiple Operating Modes-optional IC/ID card, key fob, QR/bar code, face / fingerprint / finger vein biometric recognition, push button, ESD, wireless remote control, insert coins / card / wristband, digit counter... Aneiz T10 Tripod turnstile TECHINCAL SPECIFICATION Material 304 Grade Stainless Steel Dimension 330(L) X 420(W) X 990(H)mm Arm Length 500mm Passage Width 550mm standard lane Throughput 35 to 40 people per minute Response Time â?¤0.3S Net Weight 35Kg/pcs Directional Mode Uni-directional or bio-directional Emergency Function Arm release automatically for Emergency access Power Supply AC220V/110V, 50/60Hz Power Voltage 24V DC Power Consumption 20W MCBF 5 Million Operating Temperature -20 �°C - 75 �°C Operating Environment Indoor or outdoor use Relative Humidity 90% LED Indicators Red cross means gate open, Green arrow means gate closed Warranty: 18 Months
The ESD anti-static gate is mainly to test whether the anti-static shoes and wrist straps of employees are qualified, but in order to ensure that everyone must do an anti-static test before entering the dust-free car and can enter the workshop after passing the test, so it will be in front of the workshop. Install ESD anti-static access control gate, which not only detects the static resistance value, but also saves the resistance value record of each employees.
