A water-based high-performance adhesive used for the lamination of all types of films (METPET, PET, BOPP, PVC). Product Features - Excellent rheological properties - Gives High Colour Value and easy wash-off - Gives a Soft fabric handle similar to Natural gums - Particularly suitable for viscose and cellulosic blends Technical Specification Appearance: White to Off-white pourable liquid pH: 6.5 to 7.5
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
HIPS repro pellet mixed color from yoghurt caps HIPS Recycled Pellets Thermoplastics PS has two representatives, GPPS and HIPS. In particular, PS HIPS plastic is the most popular to many advantages and applications. HIPS belongs to the group of hard, transparent resins that are easy to create color, processed by laminating film lamination and easy laminating technology. What is HIPS PLASTIC ? HIPS pellet stands for High Impact Polystyrene. Polystyrene has the chemical formula Polystyrene (C8H8)n which is a long chain hydrocarbon in which alternating carbon centers are attached to the phenyl group (the name given to the aromatic benzene ring). MATERIAL: HIPS repro pellet mixed color from yoghurt caps CATEGORY: HIPS repro TYPE: Pellet GRADE: Mixed color SPECIFICATION: Mixed color.from yoghurt caps Origin: Tunisia LOADING WEIGHT: 23 Ton FOB (USD/Ton): 900$ - 1150$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days
Supplier: Plastic scrap, plastic scrap, ldpe, hdpe, industrial films, post industrial resins, copper electrical motor scrap, insulated copper wire
Buyer: Plastic scrap
Carton Pasting Adhesives These adhesives are used for pasting the side seam of film Laminated / Varnished cartons to give permanent bond. These adhesives can be applied manually or with the help of wheel applicators or sometimes with nozzle applicators depending on the shape and type of packaged Carton. We manufacture following types of side seaming adhesives: - Eco-friendly adhesives for Manual application - Fast setting adhesives for Wheel application Anti - Choking adhesives for Nozzle application
Lamination Adhesives - Wet lamination Adhesives These adhesives are applied over BOPP / PET / PVC/ MATT FILM etc. and then laminated to the printed Board / Paper to give a very glossy laminate which improves the beauty of any packaging or printed material. It also provides protection to the printed matter from direct water contact abrasion. - Dry lamination adhesives - Enhance Production Speed - Enhance Product Quality - Cost Efficiency
liquid silicone resin adhesive for PET film bond This product is a dispersible liquid of the polydimethylsiloxane and resin among the methylbenzene, which is highly viscous and has good adhesion. It is a kind of goods with low smoke, non-toxic, no residue, good stability, high temperature resistant, that can be used under 260 temperature. It also has the characteristics of excellent weather resistance, moisture resistance, and electrical insulation. Design application It is used for the production of high-temperature tapes such as PET and PI. It is used for the production of electrical insulation, shading and sheet metal tape. It is used alone as a variety of adhesive, fixed or supported adhesives.
liquid silicone resin adhesive for PI film bond This product is a dispersible liquid of the polydimethylsiloxane and resin among the methylbenzene, which is highly viscous and has good adhesion. It is a kind of goods with low smoke, non-toxic, no residue, good stability, high temperature resistant, that can be used under 260 temperature. It also has the characteristics of excellent weather resistance, moisture resistance, and electrical insulation. Design application It is used for the production of high-temperature tapes such as PET and PI. It is used for the production of electrical insulation, shading and sheet metal tape. It is used alone as a variety of adhesive, fixed or supported adhesives.
Diameter:23mm-35mm Length:do as you Gelling time:8-50s
