It can not dissolve in water, but dissolve in organic solvents such as methyl benzene, etc. It has excellent properties such as small compression deformation, resistance to saturated vapor pressure. It can be used in manufacturing sealing material resisting to high and low temperature,waterproof, moisture- resistant and insulation material in aviation, mechanical, chemical industry,etc. Due to its physiological inertia, it can be used to manufacture artificial organ and medical rubber pipe in medical fileds, as well as raw material for high temperature silicone rubber.
We are supplier and exporter of Ferro Silicon. Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags. Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
We are exporter of Ferro Silicon. FerroChrome is a kind of Ferro alloy which is formed by Ferro and Chrome,it is an important alloy addition in steel making. Ferrochrome (Fe Cr) is an alloy of chromium and containing between 50% and 70% chromium.
Rubber ball main type: silicone ball, silicone rubber balls, sponge rubber ball, solid rubber balls, small rubber balls, hard rubber balls, soft rubber ball, nbr rubber ball, viton rubber ball. Rubber balls size: 3.2mm, 4.8mm, 5.5mm, 6.35mm, 6.5mm, 7.14mm, 8.0mm, 8.5mm, 9.52mm, 10.5mm, 27mm, 32mm, 48mm, 63mm, 70mm, 80mm to120mm. Rubber balls uses in astronautics, the automobile, the drugs manufacture, the valve, pump, the bathroom, the electron, the electric appliance, and so on industry. Rubber ball material: nbr, silicone, viton, hnbr, cr, ptfe, epdm. We maintain quality production equipment and mold in our company, we supply various rubber balls. 100
Liquid molding silicone rubber/(rtv) silicone rubber application Liquid molding silicone rubber is suitable for industries such as toys, gifts, furniture decoration, construction decoration, stationery, resin crafts, unsaturated resin crafts, poly resin crafts, candle crafts, plastic crafts, plastercrafts, artificial plant and animal crafts, buddhist statue crafts. Liquid molding silicone rubber/ (rtv) silicone rubber features A) good characteristics of easy-operation B) good flowability and light viscosity C) low shrinkage D) no deformation E) favorable tension F) favorable hardness G) high temperature resistance, acid and alkali-resistance and aging resistance Liquid molding silicone rubber/ (rtv) silicone rubber description Tin-based silicones, also called condensation-cure silicones, are two-component materials which cure at room 25kg/drum or 200kg/drum
Silicon Metal 441 (Powder)
Ferro Silicon (FeSi)
INTRODUCTION: The component A of shoe Mold Silicone Rubber is white flowing liquid and the component B is the curing agent. For example, take silicone rubber of 100g and add 2% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame. FEATURES: 1.Two-component silicone rubber with tin-catalyst 2.Cured under room temperature 3.Low shrinkage 4.Excellent fexibility & easy demould LIQUID RTV-2 SHOE MOLD SILICONE RUBBER NOTES: Shoe mold silicone rubber is used for pouring or brushing technique. That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon , mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 2 and pour them onto the sole model, then brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried. APPLICATION: Shoe mold silicone rubber is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation. ABOUT US: We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber. What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us. For more information, welcome to contact Lilian: Wechat / Phone: 8613617490457 E-mail: lilian(at)xrsil(dot)com Skype: lilian-xrsilicone Company: Dongguan Xinrun Silicone New Materials Co., Ltd Xinrun Group Limited Factory address: No.2,Zhouliao Road, Langzhou Industrial Zone,Changping, Dongguan, Guangdong, China
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
High Quality Transparent Molded Silicone Rubber for Kitchen Ware and all kinds of molded silicone products. Description GFD2071P series is fume type general purpose silicone rubber with shore A hardness 30,40,50,60,70,and 80.These products are suitable for compression molding and extruding. Features Excellent process ability Excellent mechanical and electrical properties High tensile strength FDA & FLGB grade Applications Kitchenware, bakeware Skin cover for mobile devices Tubes, sealing Product Data Item Standard (GB/T) 2031P 2041P 2051P 2061P 2071P 2075P 2081P Appearance Transparent Linear shrinkage (%) 130mm 130mm 3.6 3.6 3.5 3.5 3.4 3.3 3.3 Hardness (Shore A) 531.1-2008 31 42 51 62 71 75 81 Tensile strength (MPa) 528-2009 8.2 10.2 10.4 10.1 10.0 9.7 9.0 Elongation (%) 528-2009 759 652 570 462 369 310 205 Tensile set (%) 528-2009 6.0 3.6 4.0 5.6 5.2 3.6 2.8 Tear strength (KN/m) 529-2008 24 28 32 32 31 28 26 Curing agent: C-15, 2%; Curing condition: 170 ºC 10mins, Post cure: 200 ºC 4 hours Storage: Store in a cool and dry place, out of direct sunlight Package: 20Kg/carton or 600Kg/box
