Jute (including kenaf) was an important foreign exchange earner for the producing countries during '60s. Even during the '70s, jute was an important commodity for most of the producing countries. However, during the '80s, bulk handling techniques and synthetic substitutes entered the market and jute started losing its predominant position in the market.
For your water applications and water animal breeding, you may need PE Water Membrane used for potable water, wastewater, fish and frog raising. Request an online quotation for PE Pond Liners via our E-catalogue: Our PE film: Is flexible, strong & durable film Has elongation under stress to maintain the integrity Resists from puncturing, tearing, or cracking Resists to UV exposure & low and high temperatures Resists rodent & insect attacks We also manufacture Greenhouse Plastic, Ground Cover Film as well as other horticultural films.
- Pure Poly urea - Zero VOC's, 100% solid. - It is two liquids high temperature and pressure spray coating paint. - Short initial curing time (30 sec) - Cures at low temperature. - Excellent resistance to thermal shock. - Excellent resistance to solvent, oil and acid(chemical) - Excellent bond strength to properly prepared surface.
- one component Water-based acrylic waterproofing materials - Excellent waterproof performance, strong elasticity, adhesion and durability. - Applicable areas * Exterior wall and roof of the building * A place that requires waterproofing of various building such as concrete. - Prevention of penetration of moisture in cracks. - Excellent adhesion to concrete, water resistance . - It's safe to work with eco- friendly products. - It is possible to work on moist construction areas (but less than 30% wet)
- One component polyurethane waterproofing materials - No problem with mixing - Good adhesion to substrate - Persistence and chemical resistance - Easy application and repair - The elongation as a material with excellent elasticity -
Waterproof material The waterproofing material is one kind of performance outstanding pvc waterproofing material. The product takes the polyvinyl chloride resin as the main raw material, and joins each kind special-purpose auxiliary raw material and anti- aged ingredient. Our product is made from the advanced equipment and the advanced craft. Our product has the following outstanding characteristics, such as stronger stretch strength, higher elongation ratio, smaller shrinkage, longer service life, and it has good flexibility under the low temperature, etc. The waterproof material has different widths and different thicknesses, the widths include 1.05m, 2.05m 2.10m and the thicknesses include 0.8mmú¼ 1.0mmú¼1.2mmú¼1.5mmú¼2.0mm. The length is 10m.( the special specification may make to order). And also our product has stable performance, reliable quality and it is very convenient to install. Product characteristics: 1.Longer service life&anti- aged. It can be used for 20 years beyond the ground and be used for 50 years under the ground. 2.Stronger stretch strength, higher elongation ratio, slight change under the heat treatment. 3.Better permeability. It can adapt to different temperatures well. 4.It has good function to prevent the perforation. 5.It is very convenient to install. It is stable, environmentally friendly and has no pollution. 6.Better anti-corrosive and suitable the special situations. 7.Has the good plasticity, it is very convenient and quick to process the corner details. 8.Services conveniently, the cost is inexpensive 9.The shallow color superficial reflection ultraviolet ray illumination, the material surface absorbs less heat, so the temperature is low. 10.The material has good water vapor diffusibility, ití»s easy to discharge the cooling congeals the shape objects. And the moisture and humidity that remain to the basic unit are easier to be discharged.
Mapeband is designed for flexible sealing and waterproofing of expansion joints and crack subject to movement. It particularly used for waterproofing expansion joints in road works, water tunnels and covering applications. Technical Data: Melt index: 30 5g/10mim Density: 1 0.02g/cm3 Elongation: 500% Tensile strength: 1Mpa Shore hardness: 50 3A Shrinkage: 1% Color: Black, gray, customized Size: 120mm*50m/roll Functions: - Flexible waterproofing seal of expansion joints subject to large amounts of movement in service. - Flexible waterproofing seals in tunnels, road-works, etc. - Sealing expansion joints in prefabricated panels. Sealing structural joints in - Sealing joints in hydraulic works, such as channels, basins, drains, pipe-work, etc. - Waterproofing joints in road-works. - Waterproofing expansion joints in flat covering layers.
What is waterproof material-epdm waterproof membrane? This waterproof membrane is made from ternary ethylene-propylene rubber. Hongyuan adopts the world-advanced equipment of cold feeding extrusion and continuous vulcanization technology. With the best performance among high polymer waterproof materials, epdm is of exceptional elasticity and will not split or crack under normal building movement. What are the advantages? 1.Excellent weather-ability, durability and size stability 2.Good adaptability to high and low temperature, uv resistant and anti-corrosion 3.High tensile strength and good elongation, accommodating to structure movement 4.Easy installation, solid joint, and no environmental pollution 5.Good rooting penetration resistance 6.Service life up to 50 years Where is it can be used? 1.Roofs, basement, toilet 2.Industrial and civil building waterproofing 3.Geosynthetic liner for swimming pool, channels, irrigation system 4.Especially suit for projects with high requirements in durability, anti-corrosion and deformation How about the specification? Type epdm waterproof membrane Material Epdm rubber Thickness 1.0mm; 1.2mm;1.5mm;2.0mm Weight(kg/m2) 1.0mm 1.2mm 1.5mm 2.0mm 1.30-1.34 1.54-1.58 1.79-1.83 2.25-2.29 Length 20m/roll Width 1.2m/2.05m/4.0m Usage Basements, ponds, lake, steel structure roofing, underground, tunnels Packing 24/41/80 sqm/roll Loading in container Rolls Colors Black Packing detail: roll pallet Delivery detail: lead time 5~ 20 days
GEOTEXTILE is a superior quality product and its quantity capabilities have been tested and have been certified by KAN and international standards. Hilon Geotextile Non-woven products are the core of various types of industry, from mining, to construction, agriculture, manufacturing and infrastructure. Perfect non-woven products always deliver excellent results. The advanced machines in all our factories in Indonesia are world class machines such as DILO (Germany), Asselin (France) and Fehrer (Austria) which none of our competitors can match. And once the output leaves the machine, a neat delivery network ensures that transport times are reduced and deadlines are met. Our products have been widely used and referenced for various road projects throughout Indonesia. And currently, in accordance with existing technological developments, the application of our products is increasing in accordance with developing technology. Non woven products can be found at various important industrial points in Indonesia. Starting from mining, construction, agriculture, manufacturing, to infrastructure. We are also proud to take part in handling Government projects and partner companies, to help build Indonesia\'s future. Along with the growth and diversification of the existing economy, we also develop. Apart from that, GEOTEXTILE is also being developed to strengthen bunker layers on golf courses and also wrap perforated pipes. Stabilization Where the main function of geotextile stabilization is to spread the surface load more evenly, so that the soil can support the load well. Filtration Geotextiles to filter and prevent the migration of particles from soil/mud along with water flow in the construction system. so that water from the ground surface can flow well and quickly into the channels that have been prepared. Drainage A system for channeling surface water or subsurface water into drainage channels, where the drainage system must be able to separate soil, sand or rock material so that it does not join the water. To prevent other materials from entering the exhaust pipe, geotextile is needed to support the material, but not prevent water from coming out. Protection Geotextile is applied to protect geomembrane construction or other products from being punctured by sharp objects such as rocks, tree trunks or branches and others. Hilon geotextile is used before the geomembrane material is installed so as to prevent damage to the geomembrane. Separation Geotextiles as a separator mix two types of layers with different granulations (Soil-Stone/Stone-Sand), thereby increasing the protection of a more stable area. Concrete Curing Curing is a concrete treatment effort after the concrete has been cast. Concrete treatment is mandatory because it aims to maintain the humidity and temperature needed for cement to carry out the hydration process perfectly.
DESCRIPTION CC-103(1K) Crystalline Waterproofing Materials is fusion resin powders which contains water-soluble crystalline mineral coating with special additive syntheses. It will have a protective coating which is firm and impact resistance after curing. CC-103(1K) is a high technology product to prevent water leakage. ADVANTAGES * Prevent the constructions aging phenomenon * Avoid the leakage and mold on the wall * Effective against negative water pressure * With good stability * Non-Toxic APPLICATION * Internal and external walls * The leakage of inner wall in basements or the protection against negative water pressure * The construction of base isolated structures * Reservoir; drinking water pool * Contaminated water pool; water storage tank PROCEDURE 1. Ensure all surfaces which CC-103(1K) will be applied are clear. 2. Mix one pail(22.5KG) of CC-103(1K) and 4.5~5.0Liter water well by construction mixer. 3. Wait for 3-5 minutes and stir before use; use finishing trowel to smoothing or apply evenly with a nap roller. 4. Use finishing trowel to smoothing after using spray machine. PACKING 22.5KG per pail. STORAGE 6 months in original container stored in dry conditions. LIMITATION The crystalline products need to be used between 4 °C ~ 32 °C when applied.
