Supplier: Four stroke sprayer, battery pumps, chain saw machine's, wood cutters, and all related spare parts
The machine for cutting large amount, high accuracy requirement and development and design. Can be a single or multiple overlapping, and cutting at the same time. Saw cut surface is bright and clean without burr, without secondary processing. Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass and carbon fiber material, especially suitable for aluminium and copper electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell type display equipment, aluminum furniture, aluminum extrusion and precision cutting of different profile. 1. NC controller and touch screen are used for easy operation and fault detection. 2. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing. 3. Automatic feeding stroke of 1400mm can feed the material to the overpass. 4. Saw blade horizontal saw cutting, suitable for wide and large material processing. 5. High precision ball screw driven by servo motor. 6. Oil production pressure push in the feeding mode, high sawing stability. 7. The fixture on the feeding table is 2 sets of upward pressure and 2 sets of lateral pressure, suitable for irregular material sawing and several pieces of material sawing at the same time. 8. Special cutting action design: after saw blades linear cutting materials, controlled by the air compressor cylinder will work platform, after pulling open saw blades back to the origin. This feature is in the process of machining, in order to avoid material affected by the saw blade knife back and surface smoothness and accuracy are specially designed, so that materials processing surface more smooth and more accurate, precision improved. 9. The processing machine will automatically have no material induction or can choose to set the length of the tail material. Materials may be placed side by side and overlapped.Special sawing action design feeding mode :1. Feed to cover 2. Manual feeding. Model ZG-610FAL/NC Cutting ability WxH WxH 200x200,210x175,350x130,500x65 Servo drive system Ball screw The longest feeding trip 1400mm Automatic feeding accuracy ±0.1 mm Saw blade 2000 r.p.m. Machine motor 10HP( optional 15 HP) Servomotor horsepower 1 KW Hydraulic pump motor 3 HP The touch screen 7 " Blade size 14"~24" (1" The aperture ) Operating air pressure 6 kg/cm² Machine dimension 3500 x 2100 x 1860 mm Machine weight 2300 kgs
4.Manual Cold Saw Machine Cold Saw Machine Model:�MC-275F Max. Cutting Capacity:76mm(3) Cutting Degree:�0-90� Blade Rotating�Motor Power:�2.0/2.4�KW Blade Rotating Speed:�120/60 Giri/min Cooling Pump:�40�W Available Saw Blade Size:250/275mm Machine Dimension:�800*700*1300 Machine Weight:�180kgs SLS�Manual cold saw machine with function of manual clamp,manual feeding and manual cutting. Machine can be realized angle cutting which greatly increase the cutting feasibility. Good mechanical system ensures high cutting quality without burrs on tube internal and external. Water cooling and lubricate system prolongs the life of machine and saw blade.� Each cold saw is covered by a�one year parts warranty�plus�lifetime technical support by�SLS.We keep many cold saw models�in stock for quick shipments. STANDARD Manual feeding, Manual clamping and Manual cutting�� Strengthened and high precision flexible cutting head (2 sides 45�): Able to adjust angle freely, High precision of angle, Easy and quick adjustment.� � � � 2 sides and 2 way clamping system: High precision cutting, reduce vibration and soundless while cutting. Material Available: Steel&Stainless Steel Cutting Shape Available: Round,Square,Rectangle, circular saw machine and other profiles... Available for several pieces cutting together for small pipe size. Length stopper improve the accuracy of cutting length. Good mechanical�parts ensure machine runs in high stability.�������������������������� CE, ISO9001 Certification� � � OPTIONAL Tube Material Supporter for long tube Special clamp jaw for special pipe size TOOL: Cutting Length Stopper, Clamp Jaw&HSS Saw Blade
fully automatic feeding and sawing, PLC control system,
Supplier: Firewood & chain saws and electric machines
Be suitable for sawing various irregular non-ferrous metals, aluminums, aluminum alloys, coppers, copper alloys, PVC profiles, plastics, PVC, Bakelite plates, organic glasses (acrylic sheets) and carbon fibers and so on, especially suitable for precise sawing copper and aluminum electronic components, cooling fin, sound panel, video card, network card, CPU, hard pan, MP3 aluminum case, U disk aluminum case, aluminum windows, photo frames, picture frames, light boxes, screens, display devices, furniture aluminums, extruded aluminum and profiles. 1ã??Accurate cutting angle, high precision, smooth cutting section, burr-free and high efficiency. 2ã?? Stamp foot switch to auto press and saw materials, which is safe and easy. 3ã?? Down-to-up hidden sawing mode: high security, single or multi cutting available. 4ã?? Pressing system adopts precise linear slide to drive and is controlled by independent compressed air cylinder. High pressing stability (be able to adjust pressing pressure according to material type to prevent material from damaging caused by hard pressing). 5ã?? Be able to set pressing height and speed and cutting height and speed according to material size and thickness. 6ã?? Precise compel injection system promotes lubrication and cooling effect, reduce failure rate and prolong service life of saw blade. 7ã?? 0~45 angle cutting available. Angle adjustment is easy and accurate. Model ZG-510SA Sawing angle +45° ~ 0°~ -45° Blade size 20"x1" Inner hole Saw blade 3000R.P.M. Machine motor 5 HP Pressure required 4-6kg/cm² Size of Table 920x650mm Table height 900mm NW/GW 570 / 640kgs Machine dimension ( LxWxH ) 1200x1090x1780mm Packing dimension ( LxWxH ) 1320x1210x1980mm
1.Max.size of work-piece :1500*1500 mm 2.Max.working thickness: 150 mm 3.Max.processing speed: 0-10 M/min 4.Max. returning speed:20 M/min 5.Drawing software :Artcam, Computer Aided Design(CAD) etc 6.Transmission:Imported CSK 30 linear guide and slide 7.Spindle motor: 6 KW*2 HQD air cooling spindle, 8.Spindle speed: 0 - 18000 rpm 9.Reducer:Imported LIMING reducer 10.Frequency converter: 11 KW Hpmont 11.Air pressure 0.6-0.8 mpa 12.Operational software: Mach 3 CNC 13.Weight: 2000 kg
DJ1250 CNC rotation band sawing machine With international advanced level, has several functions of processing procedure, parameter, date real-time display ,which realize the whole process more intelligent and automatic, greatly improve sawing accuracy and efficiency . Mainly used for sawing H-beam, channel, box beams, round cross-section and others sectional workpiece, with the advantage of superior performance, high sawing precision, high-power cutting, easy operation, high production efficiency. Technical parameter of CNC rotation band sawing machinen Sawing Technical parameters Sawing H-beam size ( without roation) (Web height x flange width) ¡¡¡¡Max. 1250 mm¡¨¢600 mm ¡¡¡¡ ¡¡¡¡Mini 200 mm¡¨¢75 mm Saw Blade Size ¡¡¡¡T:1.6mm W:67mm Motor Power Main motor ¡¡¡¡15 kW ¡¡¡¡ Hydraulic pump ¡¡¡¡5.5kW Saw blade linear speed ¡¡¡¡20-100 m per min Feeding speed ¡¡¡¡0-2 m/min software control Rotation angle ¡¡¡¡0-45 Worktable Height ¡¡¡¡About 800 mm Overall size (L * W * H) ¡¡¡¡About 2200x4400x2800 mm Weight ¡¡¡¡About 8t (II) The main parameters of CNC dolly feeding 1 CNC axis X-axis 2 the servo motor power: 5.0kW 3 the mobile speed: 0 - 15m/min 4 the maximum weight of the feed: 8 tons seaworthy package, load in 40 HC & 20GP container
Machine features: Automatic tooth selection, feeding, dispensing, silver solder foil cutting and folding just through one-stage processing. High precision dosing valve to ensure the accuracy. The temperature controlled brazing and annealing cycle allows brazing joints perfectly. One worker could operate 5 equipment at the same time, greatly improved production efficiency and saved cost. Both sides of cylinders automatically fixed saw blades to improve precision. Technical data: Diameter of saw blades:120mm~790mm Rake angle:-5�°~+25�° Tip width: 1.5mm~10mm Brazing accuracy: â?¤0.05mm Thickness of saw blades: 1.0mm~9.0mm Speed of brazing : 6~12s/per tooth General power:6.4kw The width of silver solder foil: 1.5mm~6mm Diameter of silver wire : 0.5mm Water pressure : â?¥3KG Air pressure: â?¥5KG Electricity: 220 Vï¼? single phaseï¼?50 Hz (wire bigger than 6mm2) Gross Weight:700KG Dimension : 1500mm *1100mm *1700mm Options: Camera inspection system Ceia induction heating system
