Scm Products detail: This is a split pressurized thermal collector, adopting vacuum tube heat pipe technology, is widely used for residential water heating, it's easy to install the tubes. Daily output of each tube is more than 2.6 gal per day. In some southern states, this number can be expanded. Service life of this collector can be 20 years plus. More technology data of this product please feel free to find on the products section or you can download our catalog and get more details. Manifold size 120*105 mm Pipe diameter / thickness 35/0.8 mm Interface 32 mm/ 3/4 inch Material aluminum alloy Heat pipe 14*70/8*1650 mm Vacuum tube 58/1800*1.8 mm Thermal material rock wool Absorption 94% Exchange efficiency 42% Max flux 0.58l/s Running pleasure 0.6 mpa Max idle temp 270 degree c Model number number of tubes absorber area daily output(131 degree f) Scm15-58/1800 15 pcs 1.95 m2(20.99 ft2) 105-150 l(30-40 gal) Scm20-58/1800 20 pcs 2.60 m2(27.99 ft2) 140-200 l(40-50 gal) Package volume: 0.288 cubic meter, gross weight: 58kgs
Materials: Inner tank materials: sus304-2b Inner tank thickness: 0.5mm Outer tank: the steel coated with zinc Outer tank thickness: 0.37mm Insulation: polyurethane imported from south korea Insulation thickness: 50-65mm Frame materials: steel coated with the zinc Frame thickness: 1.5mm Advantages: low cost hot water and good heat efficiency. Standard export package
KM24-150-F consists of 24 vacuum tubes and its water tank's capacity is 150 Liter.The whole system is stainless steel. It has 50 mm polyurethan insulation and high quality.This type of solar system includes a water tank, an expansion tank, 24 pcs vacuum tubes, reflector and standparts.
KM24-150-S consists of 24 vacuum tubesand its water tank's capacity is 150 Liter. The inner of tanks isstainless steel, while the outer of them is galvanized. It has 50 mm polyurethaninsulation and high quality.This type of solar system includes a water tank, an expansion tank, 24 pcs vacuum tubes and standparts.
Features: 1) Inner tank: stainless steel SUS304-0.5mm 2) Vacuum tube:QB-AL-N/AL-47-1500/58-1800 3) Outer tank: painted steel-0.4mm/aluminum-zinc coated steel-0.45mm/stainless steel SUS304 4) insulation :polyurethane 50mm/60mm 5) Frame: coated galvanized steel-1.5mm/stainless steel SUS430-1.5mm 6) Reflector: aluminum component/stainless steel .
Products intro Sc-c01 Sc-c01(separate pressurized solar collector) The pipeline is made of red copper and conducted by heat transfer medium liquid. Water cannot flow in vacuum tubes and operated when confined. The crust uses aluminum alloy mould material of high strength with air flow design. It is furnished in good style. Can endure high pressure when it works. Module design, optional combination, which can meet the demand of large water consumption. Material: aluminum alloy Solar vacuum tube with heat pipe A) size: 58 x 1, 800mm B) qty of tube: 15 / 20 / 25/30pcs C) hail resistance: diameter 25mm Insulation layer in chest A) 50mm thickness imported polyurethane, machinery overall for keeping same temperature and high pressure foam B) heat preservation: 72 hours Max. Pressure bearing: 0.6mpa Iso9001 / ce certificate/en-12975 3 years international responsibility for free repairing or exchange due to original quality problems 1, manifold : red copper 2, manifold casing: aluminum alloy 3, glass tube dimensions: 58mm x 1.8m / 47mm x 1.5m 4, heat preservation: 72hrs 5, hail resistance: 25mm 6, max pressure: 10 bar 7, working pressure: 6 bar 8, coating of vacuum tube: ss-c/cu 9, heat pipe: anti-freezing > -35pâµÆpåGÇÖpâGópóGÇÜG¼pàGípâµÆpóGé¼sípâGÇÜpéG¦c Solar vacuum tube with straight copper heat pipe, there is anti-freeze liquid inside as medium transfering of heat. By the design the water never come into vacuum tube immediately so the tube will never be broken in low temperature in winter. We use this type for separate pressurized system or integrative pressurized system. High quality of tri-elements as rose copper, stainless steel and aluminium nitride planting layers, heat absorption rate can reach more than 93%, certify enough power for hot water request.
Products model: sc-s01p»G+dåseparate pressurized solar water heaterp»G+GǦ Products intro The separate pressurized solar water heater compose of solar collector, storage tank, controller, working station and installation parts. Working principle: 1) when the discrepant temperature of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically 2) the circulation pump makes heat-conducting liquid circulate automatically 3) the heat-conducting liquid transfers heat to water by heat exchanger in the water tank 4) in case the temperature of the water tank does not reach tmax, then start the auxiliary heating device 5) if discrepant temperature of the collector and the water tank does not reach the set value, the circulation pump shall be shut automatically Feature: 1) collector separates with the storage tank. The tank can be put anywhere of the house 2) and the collector can be put on both tilted roof and flat roof 3) module design, arbitrary combination, harmony with the building perfectly 4) intelligent control and automatic operation 5) anti-freeze: no water inside the tubes when it works 6) the system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature 7) multifunction: bathing, washing, domestic heating 8) workable at anytime and enjoyableouter Features of separate pressurized system: * strong hydraulic pressure makes your bathe more comfortable * modularized collector, arbitrary combination * intelligent controlling and multiple functions * arbitrary combination with structure of your beautiful constructions * separate installation conveniently * working with assistant resource * full set of original equipment, the life time will be much longer to ensure better using * material A) inner water tank: imported sus304 stainless steel B) outer water tank: galvanized steel alloy C) bracket: aluminium alloy
Products model: sc-b01p»G+dåsolar collector for balcony systemp»G+GǦ Products intro Sc-b01 Pipeline is made of all red copper and conducted by heat transfer medium liquid To save place and simple to install Suitable for families who can not put vacuum tubes on their roofs Stable and reliable performance Fashionable and beautiful It is harmoniously blended with architecture Environmental protection and energy saving * material A) inner water tank: imported sus304 stainless steel B) outer water tank: galvanized steel alloy C) bracket: aluminium alloy * solar vacuum tube with heat pipe A) size: 58 x 850mm B) qty: 8 / 10 / 12pcs C) hail resistance: diameter 25mm * temperature insulation layer A) 50mm thickness imported polyurethane, machinery overall for keeping same temperatureand high pressure foam B) temperature conservation: 72 hours* capacity: 80 / 100 / 120 liters * max. Pressure bearing: 0.6mpa * iso9001 / ce certificate/en-12975 * 3 years international responsibility for free repairing or exchange due to original quality problems
Products model sc-ip01(integrative pressurized solar water heater) Products intro Material: A) inner water tank: sus304 B) outer water tank: galvanized steel alloy C) bracket: galvanized steel or aluminum alloy Solar vacuum tube with heat pipe: A) size: 58 x 1, 900mm B) qty: 20 / 24/ 30pcs Temperature insulation layer: 50mm thickness imported polyurethane, machinery overall for keeping same temperature And high pressure foam Capacity: 200 / 240/ 300 liters Max. Pressure bearing: 1.2mpa 3 years' international responsibility for free repairing or exchange due to original quality problems
