Supplier: Portland Cement ( O P C )
Items/ index P. O 42.5 P. O 42.5r Cement mgo (%) 5.0 4.0 5.0 4.0 Cement so3 (%) 3.5 3.0 3.5 3.0 Cement loss on ignition (%) 5.0 4.0 5.0 4.0 Cement fineness (%) 10.0 4.0 10.0 4.0 Setting time (min)Initial setting time ,45 ,60 ,45 ,60 Final setting time 600 270 600 270 Soundness Qualified Qualified Qualified Qualified Strength 50kgs per bag
Supplier: Cashew kernel, cashew husk, cashew shell cake/cashew nut shell oil, cardanol,o p c 53 grade( ordinary portland cement), ammonium nitrate, potassium nitrate, potassium chloride, hexamine, chemicals, gypsum , o p c clinker, semi husked coconut
Buyer: Jute stick charcoal
-CEM I 42,5 R ( Portland Cement ) TS EN 197-1:2012 System 1+ -CEM I 52,5 N (Portland Cement) TS EN 197 -1: 2012 System 1+ -CEM II / A-M ( P-LL) 42.5 R (Portland Composite Cement) TS EN 197-1:2012 System 1+ -CEM IV / B (P) 32.5 R (Pozzolanic Cement) TS EN 197-1:2012 System 1+ -CEM IV / B (P) 32.5 R â?? SR (Sulfate Resisting Pozzolanic Cement) TS EN 197-1:2012 System 1+ -CEM I 42,5 R â?? SR5 ( Portland Cement ) TS EN 197-1:2012 System 1+
Ordinary portland cement, 42.5, 32.5, clinker with sgs reports. We are a well known turkish cement / clinker supplier for Algeria, Egypt, Libya, Georgia, Russia, West african countries and Brazilia. We can provide best price and service for your inquiry fob, cfr. Cement types: -cem I / II 42.5 r/n, en 197-1 ( ordinary portland cement), -cem IV / b (p) 32.5 n, en 197-1 ( portland pozzolanic cement) Packed in 50 kg pp bags into 1.5 mt sling-bags -Clinker suitable to produce cem I 42.5 r/n EN 197-1 cement. Bulk, sling-bag, big-bags.
Description Two-component air-drying polyurethane based primer containing zinc phosphate as anti corrosive pigment. Recommended Use :- It is recommended as a primer for MS surface in OEM applications as well as in Process industries like fertilizer plants, Refineries, Petrochemical industries for protection of steel pipelines and structural from corrosion. Physical Data :- COLOUR : Red FINISH : Matt SOLIDS BY VOLUME : 40 �± 3% THEORETICAL SPREADING RATE : 13.33 sq.mt / lit at recommended DFT of 30 �µ FLASH POINT : Base : Above 23�° C Hardener : Above 30�° C DRYING CHARACTERISTICS (At 30�° C and 65% Relative humidity) : SURFACE DRY : 30 minutes HARD DRY : Overnight FULL CURE : 7 Days SHELF LIFE : BASE : 6months HARDENER : 6 months Surface Preparation Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be manually cleaned with brass wire brush, coarse emery paper, scraper, etc to remove rust, dust, loose old coating, oil, grease, and other foreign contaminants. It is preferable to give a solvent wipe after surface preparation. The surface should be absolutely dry, moisture and oil free before primer application or Phosphated components by 7-tank pretreatment process of surface preparation. Application Data :- MIXING RATIO : Base : Hardener (As per our recommendation) APPLICATION : By Brush / By Conventional Spray THINNER : Type 290 POT LIFE : 3 hours min at 30�° C RECOMMENDED DFT : 30-40 �µ. OVERCOATING INTERVAL : MIN : 8 hours MAX :24 hours (if it exceeds, the surface should be roughened by emery scuffing grade 320) COMPATIBILITY : Can be top coated with Epoxy, Polyurethane, Chlorinated rubber and Alkyd finish coatings.
Supplier: Portland cement and clinker, cem 1 32.5 n, cem i 32.5n, cem i 42.5 n&r, cem i 42.5 n sr5, cemi i 52.5n, cem ii/b p 32.5n, cem ii/ a l 32.5r, cem ii/b l 32.5n, cem ii/a s 42.5n, type i astm, type ii astm, type v astm, clinker, clinker 32.5n &r, clinker 42.5 src, clinker 42.5 n&r
Supplier: Cement Portland 42.5 grade, cement clinkers, gibbsite bauxite, nickel, iron ore pellets, coal, iron ore
Buyer: Copper cathodes, lead ingots, zinc ingots, aluminum ingots
Supplier: Laundry soaps, detergent powder, bathing/toilet soaps, liquid detergent etc. tubular batteries, inverter, wall and floor tiles, stones, spices etc.
Services: We provide all sorts of in house shipping facilities along with our products, manufacturer
Supplier: Bituminous coal, anthracite coal osmium (south african minerals), copper cathode and general goods including: pump & gland packings, mechanical seals, dome valve seals, food grade gasket & sheeting, gaskets & sheeting, engineering felt, specialized rubber mouldings, o,ring, cords, extrusions, oil seals, o,ring kits, rotary joints, unions & carbon seals, hydraulic hose & fittings, bolts & nuts, washers, encapsulated seals, pneumatic seals, hydraulic seals, lubricants & adhesives, cement, personal protective equipment, healthy skin products, sugar, cashew nuts, school and office stationery, .
Services: Export, freight forwarding and logistics.