Shanghai Zangtian Electronic Co., Ltd.

RFID card .

YST307GU series are RFID reader/writer module which pick or send command by USB ports. YST307GU series meet kinds of international contactless IC card standards. Also YST307GU series can support kinds of cards from suppliers. YST307GU series RF antenna is separated from the module. The RFID module can be very good at reading/writing and very stable for impedance analyzer adjusting between RF circuit and antenna. The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout. Characters: The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout. Qualifications PCD: NXP RC400 Working frequency: 13.56MHz RF standard: ISO15693 SAM card slot: 2 Cable to antenna: 60cm, can be custom-made, 0.1-1.5mm Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full functions anti collision; be able to process multi-card simultaneously; be able to set operate single card only. Auto detecting card: yes, default OFF EEPROM: 4K Interface: USB Max command length: 1024 Bytes Interface level: 3.3V Power consumption: 50mA Dimension: 80mm*60mm*8.5mm Package: DIP32 Weight about:100g

YST307AS series are RFID reader/writer module which pick or send command by RS232 ports. YST307AS series meet kinds of international contactless IC card standards. Also YST307AS series can support kinds of cards from suppliers. YST307AS series RF antenna is separated from the module. The RFID module can be very good at reading/writing and very stable for impedance analyzer adjusting between RF circuit and antenna. The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout. Characters: The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout. Qualifications PCD: NXP RC500 Working frequency: 13.56MHz RF standard: ISO14443A, ISO7816 SAM card slot: 2 Cable to antenna: 60cm, can be custom-made, 0.1-1.5mm Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full functions anti collision; be able to process multi-card simultaneously; be able to set operate single card only. Auto detecting card: yes, default OFF EEPROM: 4K Interface: RS232 Max command length: 1024 Bytes Interface level: 3.3V Power consumption: 50mA Dimension: 80mm*60mm*8.5mm Package: DIP32 Weight about:100g

Introduction: When the card approach the reader, the red light turn into green;after glinting to turn redcolor again, the buzzer sound shows transiting data.It has 500ms proximity time distance for card proximity. Features: Model Acr-101 Size 122x 46x 23mm Color Dark grey Voltage Dc5~16v Current =100ma Ambient temperature -25-75 Reading range 5~15cm Output format Wiegand 26/34, rs485/232 Card type Em-id/mifare-ic Comunication distance Wg=100m, rs485=1200m

The S2-EM is a compact, waterproof stand-alone programmable access control system. The product unique feature is simple in design, easy operation, and high reliability. Main Feature > Waterproof, conforms to IP66 > One relay, 2000 users, standalone > Card type: 125KHz EM card only > Working temperature: -40 oC ~ 60 oC (-40 oF ~ 140 oF) > Pulse mode, toggle mode > Built in LDR for anti tamper > Card block enrolment > Easy for programming by master cards and remote control > Easy for install, 6 wires only

> IK10 anti collision > Metal Case, anti-vandal > Waterproof, conforms to IP66 > Wiegand 26~44, 56, 58 bits output > Card Type: 125KHz Hid & EM cards, 13.56MHz NXP Mifare, Mifare Plus, DesFire, Mifare Pro, Mifare UltraLight, Mifare Class 4K cards > Reading range: 3~8cm > External LED Control & External Buzzer Control

Key features: Frequency available with 125khz 3.3v ~ 5v dc power supply, uart-ttl interface R/w or read-only uid of t5577 and its compatible cards; Available to set to read different page or block address with password; Optional output as wg26, wg34 or uart ttl External antenna, reading range up to 5~7cm External led&buz available( external driver circuit needed Technical parameters: Electrical specification Power supply dc 3.3v-5v Power consumption < 45ma Operation frequency 125khz Baudrate 9600~115200 bit/s ( default 9600bps) Interface uart ttl Antenna external, stamp-hole Reading range 50- 70mm (depends on tag and antenna size) Mechanical specifications Dimension 25mmx16.5mmx2.8mm (lxwxh) Weight 3g Material fr-4, blue Model chk102mt Environmental conditions Operation temperature -20 +80 degree Storage temperature -40 +85 degree Humidity relative humidity 595% Supported standard/ tags T5567,T5577 and compatible cards Sdk information Demo software windows, c# program language Files comprotocol document User manual Demo.Exe

Key Features: 3.3V ~ 5V DC Power supply, RS232 or UART TTL; Compatible with ISO14443 A/B, ISO15693 ,ISO7816 T=0 PSAM card standard R/W MIFARE Classic 1K /4K, MIFARE Ultralight/Ultralight C, MIFARE DESFire, ISO14443A-4 contactless CPU card, I CODE SLI, etc Internal with 4 PSAM socket External antenna with 1.25 2P connector/IPX, reading range up to 5~7 cm Internal BUZ available for indication Technical Parameters: Electrical Specification Power supply DC 3.3V ~ 5V Power consumption < 150mA Operation frequency 13.56MHz Baudrate 9600~115200 bit/s ( default 115200bps) Interface UART TTL or RS232 Antenna External with 1.25 2P connector or IPX Reading range 50- 70mm (depends on tag and antenna size) Mechanical Specifications Dimension 76mmx50mmx2.8mm (LxWxH) Weight 10g Material FR-4, Blue Model CHK362MT Environmental Conditions Operation temperature -20 to +80 degree Storage temperature -40 to +85 degree Humidity Relative humidity 5% to 95% Supported Standard/ Tags ISO14443 A Read/write: MIFARE Classic 1K /4K, MIFARE Ultralight, MIFARE Ultralight C, MIFARE DESFire EV1, MIFARE Smart MX, MIFARE Plus S / X, MIFARE Pro X, NTAG 21x Read UID only: Read UID only of all other ISO14443A RFID tags ISO14443 B SRI4K, SRIX4K, AT88RF020, 66CL160S, SR176 ISO15693 EM4135, EM4043, EM4x33, EM4x35, I-Code SLI / SLIX, M24LR16/64, TI Tag-it HF-I, SRF55Vxx (my-d vicinity) ISO7816 PSAM T=0, T=1 standard SDK information Demo software Windows, C# program language Files Comprotocol document API document User Manual Demo.exe