The characteristic:
1.The design of this type production is according with the international fashion trend, it is easy to installation and operation.
2.Its quality is high and structure is strong and reliable, you can enjoy the hot water all-day.
The details of material:
1.Inner tank: stainless steel SUS3040.5mm
2.Outer tank: painted steel0.4mm/Aluminum-zinc steel 0.4mm/stainless steel SUS4300.4mm/stainless steel SUS3040.4mm
3.Frame: galvanized steel 1.5mm/SUS4301.5mm
4.Vacuum tube: 47 1500mm 58 1800mm
5.Insulation layer: Adopting imported polyurethane55mm
6.Reflector: stainless steel SUS430/Alumina steel:AL99%
1. Blocking design, easy assembled
2. It can be mounted sloping roof and wall without frame
3. The pipeline is made of red copper and conducted by heat transfer medium liquid; water can't flow in the vacuum tubes and is operated when confined
1) reliable and efficient twin-glass solar tubes;
2) copper heat pipes for rapid heat transfer;
3) easy plug-in installation;
4) free maintenance;
5) suitable for mains pressure water (up to 8 bar/116psi);
6) corrosion resistant silver brazed copper header;
7) aluminum frame;
8) powder coated (black, brown or silver) aluminum casing;
9) stable solar conversion during the day;
10) the perfect solar collector for domestic solar water heater systems;
11) ideal for commercial solar water heating applications.
The characteristic:
1 the vacuum tubes absorb the solar energy and transfer into the heat energy, then pass it to the u pipe, it can get high temperature.
2 there is no water in the vacuum tube, so the tube will not break in the winter.
3 it is steady and credible.
4 it can be combined with the architecture perfectly.
5 it can be combined with existing pipeline.
6 it can still operate in the event of occasional tube breakages.
The details of material:
Outer tank: alnico 1.5mm
Manifold: 22mm thickness 2mm
U copper type: 8mm thickness 0.6mm
1 The water is heated by the heat pipe rapidly.
2 There is no water in the vacuum tube,so the tube will not break in the winter.
3 It can be combined with the architecture perfectly.
4 It can be combined with existing pipeline.
5 It will be affected by the local water quality,it doesnf+t suit hard water.
6 It can still operate in the event of occasional tube breakages.
The details of material
Outer tank: Alnicof¼1.5mm
Manifold:fT22mm thickness 2mm
Solar water heater
1) reliable and efficient with twin-glass solar tubes
2) easy plug-in installation
3) outer tank material: stainless steel plate or powder coated color steel sheet
4) inner tank material: 0.5mm thick sus304 food grade stainless steel plate
5) frame material: color steel .
6) superior heat preservation ensured by 50 - 65mm polyurethane foam insulation layer.
Products are put into cartons firstly.The samples are loaded into the plywood boxes.For the fcl goods, cartons can be loaded into the container directly.
1) High efficiency solar collector using heat pipe evacuated tubes
2) Able to be used in all climates
3) Reliable and efficient with twin-glass solar tubes
4) Copper heat pipes for rapid heat transfer
5) Easy plug-in installation for mounting on the roof or at ground level
6) Maintenance free
7) Suitable for mains pressure water (up to 8bar / 116psi)
8) Corrosion resistant silver brazed copper header
9) Frame material: 304 2B grade standard steel
10) Casing material: 304 BA or AB stainless steel
11) Excellent insulator in glass wool
12) Collectors may be connected in series to increase water heating capacity
13) Tubes easily replaced if broken - can be used with broken tubes
14) Ideal for commercial solar water heating applications
Products are put into cartons firstly. The samples are loaded into the plywood boxes. For the FCL goods, cartons can be loaded into the container directly.
1) Designed to accept mains pressure cold water
2) Copper coil heat exchanger can be used as part of a closed or open loop system, providing heating to a main hot water tank
3) Freezing is of minimal concern for SFD series
4) Reliable, efficient, twin-glass solar tubes
5) Superior heat preservation with 50 - 65mm polyurethane tank insulation
6) Outer tank material: stainless steel plate or powder coated color steel sheet
7) Inner tank material:
a) 0.5mm thick SUS304 food grade stainless steel plate
b) High purity copper for the heat exchanger coil
8) Frame material: 1.2mm thick all stainless steel
9) Collectors may be connected in series to increase water heating capacity
10) Easy plug-in installation
Products are put into cartons firstly. The samples are loaded into the plywood boxes. For the FCL goods, cartons can be loaded into the container directly.
Solar keymark
Solar collector
Reliable, efficient, twin-glass solar tubes heat pipe
Copper heat pipes for rapid heat transfer
Corrosion resistant brazed copper header
Fetures:
1) length: 1800mm; thickness: 0.8mm
2) the manifold:
Made of red copper
Conducted by heat transfer medium liquid
3) the out casing:
Made of aluminum alloy mold material of high-strength with air flow design
4) water can't flow into vacuum tubes
5) resistant to high-pressure( 6bars)
6) resistant to extremely cold or hot environment
7) no harm or pollution, environment protective, clean, healthy
Economic, invest once and benefit for ever
8) to assemble many collectors together for the solar central heating project of the hotel and factory are permitted.
Modelabsorb a rea (m2)heat pipesupply hot water (l/)qty. Per 20/40 container (set)
Diameter(mm) length (mm) no. (pcs)
Free/j-1800/58-181.4458180018150/6084/175
Free/j-1800/58-201.6058180020175/6077/160
Free/j-1800/58-241.9258180024220/6064/133
Free/j-1800/58-302.4058180030260/6052/106
Detailed specification·ª
1. Capability of the tank: 180l (dia.:570mm)
2. Quantity of tube: 20pcs (¬ª58mmf¯1800mm)
3. Material of inner tank: sus304-2b stainless steel with 0.4mm thickness
4. Material of outer tank: sus304-2b stainless steel with 0.4mm thickness
5. Magnetic-controlled al-n-al splash all glass evacuated heat-collecting tubes, fast heat absorbing and temperature risen
6. Heat preservation layer: 55mm polyurethane integral foaming, superior heat preservation
7. Material of support: stainless steel profiled bar with 1.2mm thickness
8. Packing: export carton
