JX9010 is an optical fiber fusion splicer with a brand new design. With powerful functions and super low splicing loss, it is highly competent for construction of trunk lines and FTTx. Lightweight and compact, it is easy to use even in confined space. The novel fiber imaging system makes the image clearer. The real-time embeded Operating System provides a friendly man-machine interface and abundant functions. According to clients needs.
Fiber Optic Pocket Otoscope, It contains LED Bulb 4mm fiber built in for brilliant light through..
Product Description: Single-core optical fiber aligner Model: JX-160A The main features 1) Adopt high-quality guide rail, precision-class ceramic V-groove and head, low splice loss, and good consistency. 2) small size, light weight, easy to operate. The main technical indicators: Applicable fiber: 250 m and 900 m fibers; clad-fiber diameter: 125 m; Splice loss: For 160A, splice loss is not more than 0.05dB; for 160F, splice loss not more than 0.03dB Working temperature: -10 ~ 40 Dimensions: 120mm 75mm 62mm Weight:480g(fixture is not included) Configuration list: Description Model Quantity Single-core optical fiber aligner 160A 1 Matching fluid 10ML 1 Single-core fixture 250-R/250-L 2
Features 1Wide pass band 2Low Insertion Loss 3High Stability and reliability 4High Channel Isolation 5Epoxy-free on Optical Path Applications 1WDM Network 2Line Monitoring 3Acess Network 4Cellular Application 5Fiber Optical amplifier Parameter4 Channel8 Channel16 Channel MuxDemuxMuxDemuxMuxDemux Channel Wavelength (nm)1270~1610 Center wavelength Accuracy (nm)0.5 Channel Spacing (nm)20 Channel Passband (@-0.5dB bandwidth (nm)>13 Insertion Loss (dB) smallest Channel Uniformity (dB) smallest Channel Ripple (dB)0.3 Isolation (dB)AdjacentN/A>30N/A>30N/A>30 Non-adjacentN/A>40N/A>40N/A>40 Inertion Loss Temperature Sensitivity (dB)
1, 2, 4, 8, 16 pdh fiber optical multiplexer Provides 4e1/8e1/16e1 the g.703 connection Realizes long-distance monitoring of this end equipment to the far-end equipment Provides function of ordering 4e1/8e1/16e1 to loop return from the remote end, fiber self-loop at local end; and provides a group service telephone interface (to select) Three power supplies: dc-48v, dc+24v or ac220v Transmitting range: 2-120km The double filament bidirectional and the single filament bidirectional type may select Conforms to the telecommunication level operation Requirement, and does not have the fault time equally (mtbf) above 100, 000 hours
Techwin Fusion Splicer for maintenance of optic fiber www dot techwin-china dot com We will try our best to provide products similar to Fujikura Fusion Splicer, Sumitomo Fusion Splicer, FITEL Fusion Splicer, INNO Fusion Splicer, ILSINTECH Fusion Splicer, FiberFox Fusion Splicer. How About This Product? The TCW-605E Series adopt high-speed image processing technology and special precision- positioning technology, automatically finish the whole process of fiber fusion in 8 seconds typically, TFT LCD monitor displays all steps of fiber fusion clear at a glance. The Uses: � The TCW605E Series Fusion Splicer have been using in English, Spanish, Portuguese, French, Italian, German, Arabic, Russian, Korea, Japanese, etc. � Widely used for SM and MM Quartz Fiber with diameter 80-150μm(300μm optional), coating layer diameter 0.1-1.0mm and bare fiber length 16mm more or less. � Ideal tools for construction and maintenance of fiber and cable in both field and laboratory applications. Detailed Introduction: � Not only a Fusion Splicer, but also your partner who make your job easy and happy � 5.0 inch TFT color LCD monitor with anti-reflective coating � The advanced core to core fiber profile alignment system(PAS) � ARC Calibration FREE system. ARC Calibration sub-menu included in the Menu too, can do the ARC Calibration by Manual when necessary � X/Y axes was displayed or both X and Y were displayed simultaneously, Magnification up to 300 times � 8 seconds splicing time, 30 seconds Heat-Shrinking � Battery capacity was display in real time, precisely
Model:JX-550 Specifications: Applicable fiber Single-core silica optical fiber Applicable fiber Coating layer diameter: 0.25 0.9 2.0 3.0 3 2 Applicable bare fiber diameter 125 m Cleaved fiber length 5~16mm(0.25)10~16mm(0.9) Dimension 105mm(W) 70mm(D) 50mm(H) Weight 285g Cleave angle 0.7 Blade life 60000 times
Planar lightwave circuit (plc) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in pon networks to realize optical signal power splitting. Flyin optronics provides whole series of 1xn and 2xn splitter products that are tailored for specific applications. All products meet gr-1209-core and gr-1221-core requirements. By customer
Flyin Optronics offers a full range of CWDM Mux-Demux and Optical Add Drop Multiplexer (OADM) units to suit all kinds applications and network solutions. Some most common ones are: Gigabit & 10G Ethernet, SDH/SONET, ATM, ESCON, Fibre Channel, FTTx and CATV. Flyin Optronics' Coarse wavelength division multiplexer (CWDM Mux/Demux) utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path. Our CWDM Mux Demux products provide up to 16-channel or even 18-channel Multiplexing on a single fiber. Due the the low insertion loss is needed in WDM networks, we can also add ¡¡ãSkip Component¡¡À in a CWDM Mux/Demux module to reduce the IL as an option. Standard CWDM Mux/Demux package type include: ABS box package, LGX pakcage and 19¡¡À 1U rackmount. BY customer request
Fusion splicer pt-630 Features Fiber core can be display clearly Singlex or y view and x & y view simultaneously Auto check quality of cleaved end face Auto select best splicing program 9 seconds splice time and 30 seconds heat time Small bulk and light weigh 5 inch color lcd monitor with clear digital image display Simple operation menu Software upgrade via usb interface Specification Model Pt-630 Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655) Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬ 16mmú¿coating diameter: 250 ~ 1000ª8mú¬ Fiber diameter Cladding diameterú¦80 ~150ª8m Coating diameterú¦100~ 1000ª8m Fiber count Single Fiber aligning method Core aligning Image processing method Digital Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm), 0.04db (ds), 0.04db( nzds) Splicing time Typical 9 secú¼with standard sm fiber Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss ú+60db Storage of splice result 5000 resultsú¼3 parameter per result Fiber display and magnification 400xú¿x or y viewú¬, 200xú¿x and y viewú¬ Tube heating time Typical 30 sec Tube heating mode 9(templet), 24(user) Tube heating temperature Can be adjusted Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2n Electrode life 2500 No.Of splice/heating with battery Typical 130 cycles (splice/tube heat) with inner li-battery Display screen 5 inch color lcd monitor Image change over The fiber image is turned upside down Terminals Rs 232 Operating condition 0 ~ 5000m above sea level, 0 ~ 95%rh and -10í½50íµ, respectively, max. Wind velocity of 15m/s Power supply Ac 100-240v with ac adapter; inner li-battery(6600mah) Dimensions 150mm(l) x150mm (w) x150mm (h) Weight 2.7 kg excluding battery, 3.2 kg including battery
